Scoppy is an oscilloscope and logic analyzer powered by your Android phone/tablet and Raspberry Pi Pico.
Zaktualizowano
Webserver example that came with TinyUSB slightly modified to run on a Raspberry Pi Pico. Lets the Pico pretend to be a USB Ethernet device. Runs a webinterface at http://192.168.7.1/
Zaktualizowano
a library for using ws2812b and sk6812 leds (aka neopixels) with Raspberry Pi Pico
Zaktualizowano
a library for using WS2812b leds (aka neopixels) with Raspberry Pi Pico
Zaktualizowano
Pimoroni Pico Libraries and Examples
Zaktualizowano
The program receives and decodes C1,T1 or S1 telegrams (using the wireless mbus protocol) to acquire utility meter readings
Zaktualizowano
Examples to accompany the "Raspberry Pi Pico Python SDK" book published by Raspberry Pi Trading,
Zaktualizowano
Waveshare 1.3" SH1106 OLED on a Jetson Nano , Banana Pi Zero, Raspberry Pi Zero
Zaktualizowano
Turns a Raspberry Pi into a cheap, universal & web-enabled kiln Controller.
Zaktualizowano
RestPi is a django restful project. It developed for remote controlling to Raspberry Pi. It has front-end for pin controlling. Front-end developed with angularjs.
Zaktualizowano
Turns a Raspberry Pi into an inexpensive, web-enabled kiln controller.
Zaktualizowano
PICO TNC is the Terminal Node Controler for Amateur Packet Radio powered by Raspberry Pi Pico. This TNC has same functionality as WB8WGA's PIC TNC.
Zaktualizowano
RadioBerry V2.0 - Ham radio cape for Raspberry PI
Zaktualizowano
rpitx is a general radio frequency transmitter for Raspberry Pi which doesn't require any other hardware unless filter to avoid intererence. It can handle frequencies from 5 KHz up to 1500 MHz.
Zaktualizowano
A TX-only TNC (Terminal Node Controller) to generate the AFSK (Audio Frequency-Shift Keying) audio tones for APRS (Automatic Packet Reporting System) messages using a RP2040 microcontroller on a Raspberry Pi Pico board.
Zaktualizowano
SSTV beacon based on Raspberry Pi
Zaktualizowano
librpitx Radio frequency transmitter library for Raspberry Pi (B, B+, PI2, PI3 and PI zero). It is now the base of rpitx project, separate from application
Zaktualizowano
rpidatv is a digital television transmitter for Raspberry Pi (B,B+,PI2,PI3,Pizero) which output directly to GPIO. (Created by Evariste Courjaud F5OEO. Code is GPL)
Zaktualizowano
Raspberry Pi Framebuffer Copy. This program used for copy primary framebuffer to secondary framebuffer (eg. FBTFT).
Zaktualizowano
CaribouLite turns any 40-pin Raspberry-Pi into a Tx/Rx 6GHz SDR
Zaktualizowano