The program receives and decodes C1,T1 or S1 telegrams (using the wireless mbus protocol) to acquire utility meter readings
Zaktualizowano
Raspberry Pi Framebuffer Copy. This program used for copy primary framebuffer to secondary framebuffer (eg. FBTFT).
Zaktualizowano
Scoppy is an oscilloscope and logic analyzer powered by your Android phone/tablet and Raspberry Pi Pico.
Zaktualizowano
SSTV beacon based on Raspberry Pi
Zaktualizowano
RestPi is a django restful project. It developed for remote controlling to Raspberry Pi. It has front-end for pin controlling. Front-end developed with angularjs.
Zaktualizowano
A TX-only TNC (Terminal Node Controller) to generate the AFSK (Audio Frequency-Shift Keying) audio tones for APRS (Automatic Packet Reporting System) messages using a RP2040 microcontroller on a Raspberry Pi Pico board.
Zaktualizowano
RadioBerry V2.0 - Ham radio cape for Raspberry PI
Zaktualizowano
a library for using ws2812b and sk6812 leds (aka neopixels) with Raspberry Pi Pico
Zaktualizowano
Pimoroni Pico Libraries and Examples
Zaktualizowano
piku, inspired by dokku, allows you do git push deployments to your own servers, no matter how small they are.
Zaktualizowano
Raspberry Pi bareback LF/MF/HF/VHF CW (Morse code) transmitter
Zaktualizowano
PICO TNC is the Terminal Node Controler for Amateur Packet Radio powered by Raspberry Pi Pico. This TNC has same functionality as WB8WGA's PIC TNC.
Zaktualizowano
a library for using WS2812b leds (aka neopixels) with Raspberry Pi Pico
Zaktualizowano
WSPR beacon for Raspberry Pi Pico, based on pico-hf-oscillator library. It doesn't require any hardware - Pico board itself only.
Zaktualizowano
Webserver example that came with TinyUSB slightly modified to run on a Raspberry Pi Pico. Lets the Pico pretend to be a USB Ethernet device. Runs a webinterface at http://192.168.7.1/
Zaktualizowano
Examples to accompany the "Raspberry Pi Pico Python SDK" book published by Raspberry Pi Trading,
Zaktualizowano
Digital controlled radio frequency oscillator based on Raspberry Pi Pico (1 Hz to ~32.333 MHz band). RTTY, MFSK, freq sweep examples are included.
Zaktualizowano
pico-debug runs on one core in a RP2040 and provides a USB CMSIS-DAP interface to debug the other core
Zaktualizowano
Build-a-Pi will allow you to get up and running fast with a Raspberry Pi for ham radio.
Zaktualizowano
Waveshare 1.3" SH1106 OLED on a Jetson Nano , Banana Pi Zero, Raspberry Pi Zero
Zaktualizowano