Digital controlled radio frequency oscillator based on Raspberry Pi Pico (1 Hz to ~32.333 MHz band). RTTY, MFSK, freq sweep examples are included.
Zaktualizowano
WSPR beacon for Raspberry Pi Pico, based on pico-hf-oscillator library. It doesn't require any hardware - Pico board itself only.
Zaktualizowano
Habitat Raspberry Pi LoRa Gateway
Zaktualizowano
piku, inspired by dokku, allows you do git push deployments to your own servers, no matter how small they are.
Zaktualizowano
pico-debug runs on one core in a RP2040 and provides a USB CMSIS-DAP interface to debug the other core
Zaktualizowano
FM Transmitter. Use the Raspberry Pi as an FM transmitter. Works on every Raspberry Pi board.
Zaktualizowano
Raspberry Pi bareback LF/MF/HF/VHF CW (Morse code) transmitter
Zaktualizowano
Prebuilt Raspberry Pi image for running a HAM radio APRS Internet Gateway using direwolf and rtl-sdr
Zaktualizowano
Build-a-Pi will allow you to get up and running fast with a Raspberry Pi for ham radio.
Zaktualizowano
Raspberry Pi bareback LF/MF/HF/VHF WSPR transmitter.Makes a very simple WSPR beacon from your RasberryPi by connecting GPIO port to Antenna (and LPF), operates on LF, MF, HF and VHF bands from 0 to 250 MHz.
Zaktualizowano
Pi-FM-RDS FM-RDS transmitter using the Raspberry Pi
Zaktualizowano
CaribouLite turns any 40-pin Raspberry-Pi into a Tx/Rx 6GHz SDR
Zaktualizowano
Raspberry Pi Framebuffer Copy. This program used for copy primary framebuffer to secondary framebuffer (eg. FBTFT).
Zaktualizowano
rpidatv is a digital television transmitter for Raspberry Pi (B,B+,PI2,PI3,Pizero) which output directly to GPIO. (Created by Evariste Courjaud F5OEO. Code is GPL)
Zaktualizowano
librpitx Radio frequency transmitter library for Raspberry Pi (B, B+, PI2, PI3 and PI zero). It is now the base of rpitx project, separate from application
Zaktualizowano
SSTV beacon based on Raspberry Pi
Zaktualizowano
A TX-only TNC (Terminal Node Controller) to generate the AFSK (Audio Frequency-Shift Keying) audio tones for APRS (Automatic Packet Reporting System) messages using a RP2040 microcontroller on a Raspberry Pi Pico board.
Zaktualizowano
rpitx is a general radio frequency transmitter for Raspberry Pi which doesn't require any other hardware unless filter to avoid intererence. It can handle frequencies from 5 KHz up to 1500 MHz.
Zaktualizowano
RadioBerry V2.0 - Ham radio cape for Raspberry PI
Zaktualizowano
PICO TNC is the Terminal Node Controler for Amateur Packet Radio powered by Raspberry Pi Pico. This TNC has same functionality as WB8WGA's PIC TNC.
Zaktualizowano