kopia lustrzana https://github.com/maxnet/pico-webserver
Webserver example that came with TinyUSB slightly modified to run on a Raspberry Pi Pico. Lets the Pico pretend to be a USB Ethernet device. Runs a webinterface at http://192.168.7.1/
b5e1af22c0
|
||
|---|---|---|
| arch | ||
| fs | ||
| lwip@0056522cc9 | ||
| pico-sdk@fc10a97c38 | ||
| tinyusb@11c23f88bf | ||
| .gitignore | ||
| .gitmodules | ||
| CMakeLists.txt | ||
| LICENSE | ||
| README.md | ||
| fsdata.c | ||
| lwipopts.h | ||
| regen-fsdata.sh | ||
| tusb_config.h | ||
| tusb_lwip_glue.c | ||
| tusb_lwip_glue.h | ||
| usb_descriptors.c | ||
| webserver.c | ||
README.md
pico-webserver
Webserver example that came with TinyUSB slightly modified to run on a Raspberry Pi Pico. Lets the Pico pretend to be a USB Ethernet device. Runs a webinterface at http://192.168.7.1/
Build dependencies
On Debian:
sudo apt install git build-essential cmake gcc-arm-none-eabi
Your Linux distribution does need to provide a recent CMake (3.13+). If not, compile CMake from source first.
Build instructions
git clone --depth 1 https://github.com/maxnet/pico-webserver
cd pico-webserver
git submodule update --init
mkdir -p build
cd build
cmake ..
make
Copy the resulting pico_webserver.uf2 file to the Pico mass storage device manually. Webserver will be available at http://192.168.7.1/
Content it is serving is in /fs If you change any files there, run ./regen-fsdata.sh
By default it shows a webpage that led you toggle the Pico's led, and allows you to switch to BOOTSEL mode.