Citizen4 Forgejo

This repo is similar to pico-examples but utilizing additional libraries from pico-extras

Zaktualizowano 2023-05-03 20:34:51 +00:00

This repo has additional libraries that are not yet ready for inclusion the Pico SDK proper, or are just useful but don't necessarily belong in the Pico SDK.

Zaktualizowano 2023-09-11 13:17:53 +00:00

Webserver example that came with TinyUSB slightly modified to run on a Raspberry Pi Pico. Lets the Pico pretend to be a USB Ethernet device. Runs a webinterface at http://192.168.7.1/

Zaktualizowano 2021-04-21 20:25:52 +00:00

Pimoroni Pico Libraries and Examples

raspberry-pi-pico

Zaktualizowano 2024-04-24 12:04:38 +00:00

Waveshare 1.3" SH1106 OLED on a Jetson Nano , Banana Pi Zero, Raspberry Pi Zero

Zaktualizowano 2022-01-24 21:47:48 +00:00

Bitbanged DVI on the RP2040 Microcontroller

Zaktualizowano 2024-03-21 12:56:26 +00:00

Pecan Pico 10 - A lightweight APRS tracker and digipeater

Zaktualizowano 2019-08-19 21:23:34 +00:00

PICO TNC is the Terminal Node Controler for Amateur Packet Radio powered by Raspberry Pi Pico. This TNC has same functionality as WB8WGA's PIC TNC.

Zaktualizowano 2023-08-18 14:32:50 +00:00

This Git repository contains a Micro-SDR implementation, based on a RP2040 Pi Pico.

Zaktualizowano 2022-12-14 19:23:32 +00:00

Inspired by a description of an Arbitrary Waveform Generator

Zaktualizowano 2022-02-18 16:45:43 +00:00

rpitx is a general radio frequency transmitter for Raspberry Pi which doesn't require any other hardware unless filter to avoid intererence. It can handle frequencies from 5 KHz up to 1500 MHz.

Zaktualizowano 2024-03-12 11:45:40 +00:00

A TX-only TNC (Terminal Node Controller) to generate the AFSK (Audio Frequency-Shift Keying) audio tones for APRS (Automatic Packet Reporting System) messages using a RP2040 microcontroller on a Raspberry Pi Pico board.

Zaktualizowano 2024-01-09 20:43:19 +00:00

M.CU.M.E = Multi CompUter Machine Emulator esp32 , rpi pico, teensy

Zaktualizowano 2023-05-28 15:24:02 +00:00

csdr is a command line tool to carry out DSP tasks for Software Defined Radio. included in rpitx

Zaktualizowano 2019-05-29 21:31:37 +00:00

rpidatv is a digital television transmitter for Raspberry Pi (B,B+,PI2,PI3,Pizero) which output directly to GPIO. (Created by Evariste Courjaud F5OEO. Code is GPL)

Zaktualizowano 2017-03-06 14:49:57 +00:00