sp9unb
/
meshtastic-firmware
sforkowany z mirror/meshtastic-firmware
1
0
Forkuj 0
Kod Zgłoszenia Oczekujące zmiany Packages Projekty Wydania Wiki Aktywność
1 652 Commity
8 Gałęzie
195 Tagi
44 MiB
Wykres commitów

302 Commity (f5e42b2533a21027d60b863be0f6eb2f706f1c40)

Autor SHA1 Wiadomość Data
Jm Casler 3473a1e323
wait_bluetooth_secs to 60 seconds. 2020-11-22 19:32:48 -08:00
Jm Casler 4679dd7c4d
Lora Design Guide 
Airtime calculation is in section 4.
 2020-11-17 11:14:57 -08:00
Kevin Hester 619a48085a pinetab docs 2020-11-12 18:31:35 +08:00
Kevin Hester c5903a790b update for portduino 2020-10-31 15:50:39 +08:00
Kevin Hester d7368d5a51 begin deep sleep support for nrf52 2020-10-30 17:05:32 +08:00
Kevin Hester f698883c02 add pinetab docs 2020-10-29 13:26:14 +08:00
Kevin Hester 5e0d53a1e3 ppr1 todo updates 2020-10-28 09:48:28 +08:00
Kevin Hester 7597d5b3fd PPR1 - GPS serial now works 2020-10-25 17:07:54 +08:00
Kevin Hester 1a8891c33d ppr1: add crude version of charge controller driver 2020-10-24 18:40:47 +08:00
Kevin Hester f0eeaf01d4 ppr1 lcd is 'good enough' for now 2020-10-24 09:49:14 +08:00
Kevin Hester 0767c8be03 PPR1 fix screen mirroring on LCD 2020-10-24 08:16:15 +08:00
Kevin Hester b081a6da56 ppr1 st7567 lcd kinda works now 2020-10-23 18:00:43 +08:00
Kevin Hester 68ddb712f5 properly keep nrf52s from sleeping 2020-10-16 14:00:56 +08:00
Kevin Hester ef325289eb fix a doc error 2020-10-12 11:09:53 +08:00
Kevin Hester 49b4ed2a89 coroutine: kinda works now 2020-10-10 18:03:45 +08:00
Kevin Hester 023f1c24fb RTC: add notion of 'quality' for different time sources 
Allow use of mesh based time until a GPS time arrives
 2020-10-08 07:46:20 +08:00
Kevin Hester f00d07baa3 RTC: pull rtc code into own file for cleanup 2020-10-08 07:28:57 +08:00
Kevin Hester bdcd5c3981 allow reporting # sats before we ahve a fix 2020-10-08 06:22:25 +08:00
Kevin Hester fc82e872d6 don't require gps to have lock before we'll trust GPS time 2020-10-08 05:23:52 +08:00
Kevin Hester b47c54b5b6 keep lora radio totally unpowered when in deep-sleep 2020-10-07 17:52:44 +08:00
Kevin Hester c0c83ad389 If we are not supposed to share locations make sure phone doesn't either 2020-10-07 17:46:25 +08:00
Kevin Hester 7a5832ab8a SX1262: fix serious bug with detecting if we have a rx packet in progress 
Could cause hangs on the way into sleep (and enormous power consumption).
Instead of checking for rx packet length (which only changes at completion)
check if we've received preamble bits but haven't yet received a completed
packet interrupt.

notes:


wait to sleep loop problem
radio wait to sleep, txEmpty=0
radio wait to sleep, txEmpty=0
radio wait to sleep, txEmpty=0
radio wait to sleep, txEmpty=0
radio wait to sleep, txEmpty=0
radio wait to sleep, txEmpty=0
Can not send yet, busyRx
radio wait to sleep, txEmpty=0
radio wait to sleep, txEmpty=0
radio wait to sleep, txEmpty=0
radio wait to sleep, txEmpty=0
radio wait to sleep, txEmpty=0
radio wait to sleep, txEmpty=0
radio wait to sleep, txEmpty=0
radio wait to sleep, txEmpty=0

vs normal run
radio wait to sleep, txEmpty=0
radio wait to sleep, txEmpty=0
radio wait to sleep, txEmpty=0
radio wait to sleep, txEmpty=0
radio wait to sleep, txEmpty=0
radio wait to sleep, txEmpty=0
radio wait to sleep, txEmpty=0
radio wait to sleep, txEmpty=0
radio wait to sleep, txEmpty=0
radio wait to sleep, txEmpty=0
radio wait to sleep, txEmpty=0
radio wait to sleep, txEmpty=0
radio wait to sleep, txEmpty=0
radio wait to sleep, txEmpty=0
radio wait to sleep, txEmpty=0
Starting low level send (id=0x53fe1dd0 Fr0xe5 To0xff, WantAck0, HopLim3 encrypted)
Completed sending (id=0x53fe1dd0 Fr0xe5 To0xff, WantAck0, HopLim3 encrypted)
 2020-10-07 13:43:51 +08:00
Kevin Hester 044cc26340 #376 use power off command instead of killing gps power per manual 9.5 2020-10-07 11:44:30 +08:00
Kevin Hester 4ccd03623f bug #376: disable the "wake on serial" feature, because it causes 
bogus wakes on TBEAMS because the USB->SERIAL chip pulls the RX input
to ground.  This feature is no longer needed because in !isRouter
nodes we force the node to never sleep anyways when on USB power.

    // this doesn't work on TBEAMs when the USB is depowered (causes bogus interrupts)
    // So we disable this "wake on serial" feature - because now when a TBEAM (only) has power connected it
    // never tries to go to sleep if the user is using the API
    // gpio_wakeup_enable((gpio_num_t)SERIAL0_RX_GPIO, GPIO_INTR_LOW_LEVEL);
 2020-10-06 14:24:08 +08:00
Kevin Hester 7854a22fbf bug #376 - stop using pmu IRQ - we don't need it and it causes LS wakes 2020-10-06 12:45:19 +08:00
Kevin Hester 943d5cb08d bug #376 we were not staying in light sleep as long as intended 2020-10-06 11:48:53 +08:00
Kevin Hester 7480eb1826 Change to use zeros for timeout values that are 'default' 2020-10-06 09:43:00 +08:00
Kevin Hester ef146fc0b5 bug #376 - wip time only mode now works 2020-10-06 06:27:46 +08:00
Kevin Hester 736642455f bug #376 wip - we now respect the new gps_operating_mode pref. 2020-10-06 05:34:56 +08:00
Kevin Hester 3c1c11e439 bug #376 wip - we now kill gps power when it is supposed to be asleep 2020-10-05 15:29:26 +08:00
Kevin Hester b072eec4ac wip for #376 2020-10-05 14:43:44 +08:00
Kevin Hester ff9b49ddaa add lora32 schematic 
Signed-off-by: Kevin Hester <kevinh@geeksville.com>
 2020-10-05 11:03:30 +08:00
geeksville 1907873831 gps wip for #376 2020-10-01 10:04:04 -07:00
geeksville 4342ae74fb Merge remote-tracking branch 'root/master' 2020-09-30 07:24:38 -07:00
geeksville bf808f57fe add air530 manuals 2020-09-26 18:25:10 -07:00
geeksville 7ca150bf07 personal notes about threading 2020-09-26 06:50:54 -07:00
geeksville 1a064a4666 Merge remote-tracking branch 'root/master' 2020-09-25 09:19:58 -07:00
geeksville 1f36139e99 remove Signal 2020-09-25 09:14:44 -07:00
Ken Van Hoeylandt 829c5f493c
Fix for broken link to device API docs 
bluetooth-api.md -> device-api.md
 2020-09-23 20:16:21 +02:00
geeksville 3352fae64c fix #371 allow button while using API. also don't let tbeams sleep if they have USB power 2020-09-21 12:41:39 -07:00
geeksville fc20f658e6 Fix #362 by @a-f-G-U-C - I was mispelling NMEA ;-) 2020-09-16 09:22:03 -07:00
geeksville 313cee9a3f update webpage 2020-09-15 17:54:55 -07:00
geeksville 621fcb598e Declare 1.0 2020-09-14 09:25:14 -07:00
drewsed 5423f4e06c Added a new 3D printable case to \README.md and updated \docs\README.md 2020-09-04 10:41:22 +02:00
Dafeman eda4862f0d
Update build-instructions.md 2020-09-03 08:34:52 +12:00
geeksville 83ae3c7714 doc rename 2020-08-25 12:48:19 -07:00
geeksville babd57ecde add hw docs 2020-08-25 12:06:55 -07:00
geeksville 22946b5e51 @BigCorvus board now kinda boots 
###RTT Client: -----------------------------------------------
###RTT Client: Connecting to J-Link RTT Server via localhost:19021 ...
###RTT Client: Connected.

SEGGER J-Link V6.70c - Real time terminal output
SEGGER J-Link ARM V9.6, SN=69663845
Process: JLinkGDBServerCLExe
Emitting reboot packet for serial shell
I2C device found at address 0x55
done
Meshtastic swver=unset, hwver=unset
Reset reason: 0x0
FIXME, call randomSeed
ERROR: No UBLOX GPS found
Hoping that NEMA might work
RadioConfig reset!
Initial packet id 1481765933, numPacketId 4294967295
No saved preferences found
NODENUM=0xB18C3A4E, dbsize=1
Starting meshradio init...
Set radio: name=Default, config=3, ch=6, power=17
SX1262 init result 0
sending owner !df5db18c3a4e/Unknown 3a4e/?4E
Update DB node 0xB18C3A4E, rx_time=0
old user !df5db18c3a4e/Unknown 3a4e/?4E
updating changed=0 user !df5db18c3a4e/Unknown 3a4e/?4E
Adding packet record (id=0x5851F430 Fr0x4E To0xFF, WantAck0, HopLim3 Payload:User)
enqueuing for send (id=0x5851F430 Fr0x4E To0xFF, WantAck0, HopLim3 encrypted)
txGood=0,rxGood=0,rxBad=0
Starting low level send (id=0x5851F430 Fr0x4E To0xFF, WantAck0, HopLim3 encrypted)
assert failed src/mesh/SX1262Interface.cpp: 102, virtual void SX1262Interface::setStandby(), test=err == ERR_NONE
 2020-08-17 11:29:00 -07:00
geeksville dec88a368b First attempt at better protocol docs. Bug #308 
@cyclomies thank you for the prodding and help.  I'm happy to add more
detail, can you insert a few questions inline?  Then I'll answer and
hopefully that will be enough to be useful for others.
 2020-08-11 17:34:49 -07:00
Kevin Hester d6658dbb2e
Merge branch 'master' into PlatformIO-build-guide-update 2020-08-10 08:56:15 -07:00