sp9unb
/
meshtastic-firmware
sforkowany z mirror/meshtastic-firmware
1
0
Forkuj 0
Kod Zgłoszenia Oczekujące zmiany Packages Projekty Wydania Wiki Aktywność
3 436 Commity
8 Gałęzie
195 Tagi
44 MiB
Wykres commitów

279 Commity (8a79ede285871464e55343ab328b6be556e4978c)

Autor SHA1 Wiadomość Data
geeksville c0307cbcb0 a cleaner way to add variants - no longer need symlinks in adafruit proj 2020-08-17 10:23:21 -07:00
geeksville 6b568ab2fb add powerhold for @bigcorvus board 2020-08-16 14:50:04 -07:00
geeksville 559a790286 Add @BigCorvus board support to build 2020-08-16 14:08:31 -07:00
geeksville 8c7aa07c70 Only do AXP debugging on ESP32 targets 2020-08-12 17:10:59 -07:00
geeksville 6a402b13fa Add battery sensing (mostly) for TBEAM0.7 
However, disabled until someone with suitable hardware can test and report
back.

@slavino and @tschundler would you be willing to try it with your boards?

You'll need to uncomment the following line in configuration.h

// #define BATTERY_PIN 35 // A battery voltage measurement pin, voltage divider connected here to measure battery voltage
 2020-08-12 17:03:36 -07:00
geeksville 829763af2c remove stale comment 2020-07-30 09:35:07 -07:00
geeksville 5bab16636d Switch to NimBLE from Bluedroid 
Meshtastic patched version esp-idf commit #e7f316d5a4eb64ca52d40575cb20815d456a9c4f
    used.

    In support of: https://github.com/meshtastic/Meshtastic-device/issues/266
 2020-07-24 12:39:35 -07:00
geeksville 204f2c1a68 software update service now registered with NimBLE 2020-07-24 11:39:48 -07:00
geeksville 531f488fe8 WIP nimble ugly but advertise works 2020-07-22 10:46:01 -07:00
geeksville 7f6dc104f0 nimble WIP - add advertising boilerplate 2020-07-22 09:51:57 -07:00
geeksville 102085808f WIP nimble now builds 2020-07-21 12:42:24 -07:00
geeksville 2645730329 Merge branch 'post1' into nimble 
# Conflicts:
#	docs/software/TODO.md
#	docs/software/nrf52-TODO.md
#	platformio.ini
#	src/esp32/MeshBluetoothService.cpp
 2020-07-21 11:20:09 -07:00
geeksville 6aa28f55dd WIP stubify to get app building without CONFIG_BLUEDROID (BLE disabled) 2020-07-21 11:16:14 -07:00
geeksville 20ac8d71fd make PSRAM optional - new flag in ESPIDF - fix #293 2020-07-18 16:26:43 -07:00
geeksville ece75d1d7f make PSRAM optional - new flag in ESPIDF - fix #293 2020-07-18 16:25:53 -07:00
geeksville 9e10ce487c Merge branch 'master' into post1 2020-07-18 13:32:30 -07:00
geeksville 08c77caaa9 fix #266 ble forced to re-pair details below 
The NVS copies of hte BLE pairing info for clients were getting corrupted
occasionally.  So I went googling and found some plausible bug reports
but nothing that was an exact match.  Then I looked at the arduino-esp32
binaries for the ESP-IDF framework.  They were fairly old (Jan 20).

Looking through the commits on ESP-IDF release3.3 it seems like there have
been a few fixes for mutual exclusion errors wrt bluetooth.  So I punted
and tried updating ESP-IDF to latest and everything seems fairly solid
now.  Currently running a long test run with three nodes.
 2020-07-18 08:54:52 -07:00
geeksville 859642d2e4 Merge remote-tracking branch 'root/master' into post1 
# Conflicts:
#	src/configuration.h
 2020-07-17 12:06:57 -07:00
geeksville e433249bb1 Default back to tbeam in builds, so it will work for others 2020-07-17 11:14:18 -07:00
Marlon Spangenberg 44749470a4 fix #272 add support for tlora-v2-1-1.6 2020-07-14 16:16:49 +02:00
geeksville 6fbf6b2986 RAK815 WIP - use 115200 for serial to USB on this board, best it can do 2020-07-10 13:24:00 -07:00
geeksville feb9992d7d on rak815 use serial port for console 2020-07-10 13:11:29 -07:00
geeksville cc35ed7782 update build instructions for RAK815 2020-07-10 12:12:03 -07:00
geeksville 0c04ba4776 use my fixed nrf52832 support in arduino 2020-07-10 11:28:18 -07:00
geeksville b00a936f41 WIP RAK815 support 2020-07-10 11:02:29 -07:00
geeksville 80b14c0a6f add support for adafruit feather nrf52832 - which is close to a RAK815 2020-07-09 21:27:34 -07:00
geeksville 6954d0d5f4 Checkout submodules for CI build 2020-07-09 20:31:16 -07:00
geeksville 7e53731fe6 Use our custom variants files and fixes 2020-07-09 20:22:40 -07:00
geeksville 311d1a56b4 make a bare nrf52840dk build which will work for everyone 2020-07-09 20:05:39 -07:00
geeksville ed589727d6 Update NRF52 build to work again 2020-07-09 19:57:55 -07:00
geeksville 09f4943869 Merge remote-tracking branch 'root/master' into dev 2020-07-05 12:10:25 -07:00
geeksville 7bd4940ed8 fix #254 2020-07-05 12:04:15 -07:00
Slavomir Hustaty 8d122f36e3
Update platformio.ini 
https://github.com/meshtastic/Meshtastic-device/issues/243#issuecomment-653361142
 2020-07-03 07:44:14 +02:00
geeksville a7456a1126 all targets are arduino - for now 2020-07-01 10:08:09 -07:00
Professr 6a09ddef18 Resolved merge conflict 2020-06-22 12:25:59 -07:00
geeksville c1865f127c make sure people who are not just me, get the fixed arduino-esp32 2020-06-22 11:17:08 -07:00
Professr cfcaf28ace Switched user button to OneButton, added alt button GPIO for #162 2020-06-22 11:09:26 -07:00
geeksville 8190098bb8 experiment with wifi connections for nodes 2020-06-21 14:11:38 -07:00
geeksville 60b38215ce fix docs per @feh123 2020-06-20 09:58:45 -07:00
geeksville 154114e900 merge cubecell experiments back into master (might delete later) 2020-06-17 11:35:21 -07:00
geeksville a47524b762 cubecell wip 2020-06-16 17:13:26 -07:00
geeksville fd2f5a5ba4 Merge branch 'dev' into cubecell 2020-06-16 16:18:30 -07:00
geeksville e66b2234f6 Experiment with small ram NRF52s 2020-06-16 15:27:08 -07:00
geeksville 9ad14ad98b Cleanup to merge NR52 support back into mainline 2020-06-15 14:47:14 -07:00
geeksville 362d5452d5 remove unused chip 2020-06-15 13:31:53 -07:00
geeksville 92e5a15399 Merge branch 'master' into cubecell 2020-06-15 12:42:01 -07:00
geeksville 114e0c4ada Merge branch 'master' into bringup 2020-06-15 12:41:22 -07:00
geeksville 47e614c7d6 fix #172 
We need our own branch because we need this fix and associated pullrequest
https://github.com/espressif/arduino-esp32/pull/4085
 2020-06-13 08:26:48 -07:00
geeksville 1c63a70673 cubecell WIP 2020-06-05 17:30:09 -07:00
geeksville 4db176867b WIP - bringup on PPR 2020-06-05 11:00:58 -07:00
geeksville 8031c47602 put nrf52 on back burner for a couple of days 2020-06-03 12:55:55 -07:00
geeksville 6a3033fa85 improve NRF52 debugging environment 2020-05-26 15:55:36 -07:00
geeksville a96c8fd4db nrf52 debugging is supported as long as BLE is not advertising 2020-05-25 17:16:09 -07:00
geeksville d5f177b1ee begin UC1701 driver 2020-05-25 10:41:46 -07:00
geeksville e8f6504ec4 Make an accelerated NRF52 implementation for AEX256-CTR crypto 2020-05-24 14:45:50 -07:00
geeksville fb3b62f8f0 CSR WIP 2020-05-23 15:48:23 -07:00
geeksville dd0209b192 Merge remote-tracking branch 'root/master' into nrf52 
# Conflicts:
#	docs/software/nrf52-TODO.md
#	src/mesh/RadioLibInterface.cpp
#	src/mesh/mesh.pb.h
 2020-05-22 11:12:22 -07:00
geeksville a6475ce848 experiment with CFG_DEBUG (it fails) 2020-05-21 21:17:38 -07:00
geeksville 2dadb4d7a2 make nrf52dk build again 2020-05-21 20:31:22 -07:00
geeksville ef1463a6a9 have tbeam charge at max rate (450mA) 2020-05-17 04:44:48 -07:00
geeksville 5ec5248fe4 complete ble ota move 2020-05-14 14:22:11 -07:00
geeksville b6a202d68e runs again with new protobufs 2020-05-12 13:35:22 -07:00
geeksville 8b911aba7f Cleanup build for NRF52 targets 2020-05-10 12:33:17 -07:00
geeksville c2be6c4068 WIP on #124 2020-05-04 17:39:57 -07:00
geeksville 933d5424da abstract out the UBlox GPS driver 2020-05-04 11:15:05 -07:00
geeksville 71fcdba017 cleanup directory structure 2020-05-01 09:04:00 -07:00
geeksville b1a55b4576 old RF95 API works again 2020-04-30 16:47:56 -07:00
geeksville 074ac33b8a make a gdb "restart" command that allows restarting without rebuilding 2020-04-29 20:23:59 -07:00
geeksville 2982e197e0 radio settings now work on real sx1262 hw 2020-04-29 19:04:59 -07:00
geeksville 814c126e67 ugly WIP on switching to RadioLib, still need to set freq etc... 2020-04-29 14:54:03 -07:00
geeksville a7d153abcb CUSTOM GPIOs the SX1262MB2CAS shield when installed on the NRF52840-DK development board 2020-04-29 12:57:34 -07:00
geeksville 1b265eb48d switch from sx126x-arduino to radiolab 2020-04-29 10:50:50 -07:00
geeksville e5d2d24e2c move nanopb includes to correct directory 2020-04-27 09:27:36 -07:00
geeksville dec4870649 begin cleaning up mesh library layer so that it could be split someday 2020-04-27 07:54:19 -07:00
geeksville 7ff42b89a6 CI autobuilder can't yet build nrf52 targets 2020-04-27 07:44:57 -07:00
geeksville 15cb599cd1 move nrf52 stuff to correct directory name 2020-04-27 07:39:50 -07:00
geeksville db11d9280c add nrf52 DFU app helper 2020-04-24 21:08:16 -07:00
geeksville ca03110932 Update ESP32 build to work with latest NRF52 changes 2020-04-24 14:55:51 -07:00
geeksville bb885a5110 add a variant based on the nrf52840-dk but with a RC clock. 
Because I was dumb and accidentally ran some code that configured gpio 0
as an output and that was enough to smoke the xtal that was preinstalled
between P0.0 and P0.1.
 2020-04-24 12:30:06 -07:00
geeksville e0a1855429 Add PMU driver 2020-04-24 08:38:00 -07:00
geeksville 8f26ae240a Add UC1701 and SX126X drivers (not yet using them though) 2020-04-24 08:05:25 -07:00
geeksville 3c9c01189d old RF95 driver probably works on NRF52 now 2020-04-23 18:47:27 -07:00
geeksville 2fdb75efdf make GPS 'work' on nrf52 2020-04-23 16:20:07 -07:00
geeksville fe3cbeed3a misc NRF52 fixes 2020-04-23 12:47:41 -07:00
geeksville bd77d47215 change serial baud rate to 921600 2020-04-22 14:58:35 -07:00
geeksville 2419ebb04e 0.4.3 Fix #92: omg - for the last couple of weeks the official builds were 
all using US frequencies.  This build fixes this (and makes the build
system cleaner in general).

If you are building your own builds in the IDE you'll need to start
setting an environment variable called COUNTRY to your two letter
country code (or leave unset to get US frequencies).  See new comment
in platformio.ini.
 2020-04-19 08:33:59 -07:00
geeksville 0d14b69a24 remove disasterradio experiment 2020-04-16 17:30:46 -07:00
geeksville 86716c4397 remove tbeam0.7 until someone who has the hardware can debug it 2020-04-16 09:05:53 -07:00
geeksville 2464784f00 todo updates 2020-04-15 14:51:17 -07:00
geeksville 0a6af936ed Get build (kinda, not really) running on a NRF52 
Lots of NO_ESP32 to remove later...
 2020-04-14 20:22:27 -07:00
geeksville 0b62083e35 wip - plan 2020-04-14 16:45:26 -07:00
geeksville fd17193d5e Strip out all the parts of Radiohead (most of it) that we don't need 2020-04-14 12:31:29 -07:00
geeksville 93a06906cb begin splitting up source files, so we can have a tree of sources... 
unique to each architecture.  For now, we have "esp32" and "bare"

esp32 is the old esp stuff

bare is an target suitable for emulation that doesn't require any
particular hardware to run (no bluetooth, no i2c devices, no spi devices)
 2020-04-10 12:15:35 -07:00
geeksville 06a17885eb need need to link against the axp202 library on devices that don't have it 2020-04-07 21:27:08 -07:00
geeksville c22df18e28 fix collision avoidance for transmit - substantially improves lora tx success 2020-04-06 09:39:44 -07:00
geeksville af35f3006c force other devs to update for 
fix https://github.com/meshtastic/Meshtastic-esp32/issues/76
 2020-04-05 14:13:04 -07:00
geeksville da74803ffb begin cleanup on radio abstraction, details below: 
* to allow changing to new mesh transport
* to allow a different chipset for the radio
* to allow testing on hardware with a SimRadio
* new "bare" build env for a devboard with virtually no hardware
* make buttons optional
 2020-03-31 21:56:35 -07:00
geeksville 1fd92cf8eb fix build for Windows based on tip from @moinars 2020-03-29 12:33:14 -07:00
geeksville ea250d9cd3 add initial guess at TBEAM 0.7 hardware support 2020-03-28 15:31:22 -07:00
geeksville be468a2183 add reasonable guesses for TTGO LORA V1 and V2 boards - thanks @sensorsiot 
for the pinouts
 2020-03-28 14:45:33 -07:00
geeksville cf2aa37635 clean up configuration.h and add support for ttgo-lora-v1 boards 2020-03-27 16:55:19 -07:00
geeksville d831beab3d moving build selection into platformio.ini rather than nasty #defines. thanks to @sensorslot 
for the pointer to https://github.com/arendst/Tasmota - where I just borrowed heavily ;-)
 2020-03-27 14:03:58 -07:00
geeksville 9ec8562ce7 fix old geeksville link (though github provides redirects) 2020-03-15 16:57:21 -07:00
geeksville 64109b25f2 Switch to native ublox api for GPS position and time 2020-03-14 12:46:24 -07:00
geeksville 9bbd658b9d begin testing native ublox api 2020-03-13 20:30:48 -07:00
geeksville 4999da0824 Merge branch 'dev' into gps-sleep-mode 
# Conflicts:
#	docs/software/TODO.md
#	platformio.ini
 2020-03-13 18:48:38 -07:00
Kevin Hester e01680cd4b Change all repo URLs to be meshtastic... instead of geeksville... 2020-03-02 15:13:33 -08:00
Girts Folkmanis 0b8d7768fd some minor cleanups 
* Suppress warnings about conflicting library names in platformio.ini by
  explicitly picking the libraries by id that we want.
* fix unused static function warning by making it not static ;)
* declare arduino-fsm as dependency for BluetoothOTA. Hopefully this
  fixes the CI builds?

Tested: `pio run` builds.
 2020-02-28 19:26:11 -08:00
geeksville 76100e23eb WIP make swupdate keep power on 2020-02-23 11:37:38 -08:00
geeksville 316347226b don't use a symlink to find my modified RadioHead, use a pio depdency 
To make it more easily buildable by others.
 2020-02-23 08:24:10 -08:00
geeksville 6eba792537 WIP - changing to a ublox aware GPS lib so I can put it in sleep 2020-02-22 19:08:16 -08:00
geeksville 045529d91f begin cleanup of sleep code for new state machine 2020-02-21 17:01:26 -08:00
geeksville b9438357b6 add support for network ping testing 2020-02-19 18:51:17 -08:00
geeksville 593a6e6f83 BLE is now secured to require pairing with PIN 2020-02-07 20:59:21 -08:00
geeksville ade30ee1ce bidir comm works 2020-02-06 21:26:40 -08:00
geeksville 0b226132b8 begin cleanup on gps code 2020-02-06 07:40:00 -08:00
geeksville 0050e4b05a progress 2020-02-05 22:13:27 -08:00
geeksville 83fb38b38c jlink jtag debug now works on lora32 board, problem was gpio14 is needed 2020-02-05 15:37:58 -08:00
geeksville 37eca63e58 fix bt reads of owner etc 2020-02-04 13:47:42 -08:00
geeksville b538677ad2 include our local user in the node db 2020-02-04 09:00:17 -08:00
geeksville b04fb061c4 stop explicitly using Serial.print for debug messages 2020-02-04 08:17:44 -08:00
geeksville 4a40b9499b allow heltec boards to boot without i2c when jtag debugging 2020-02-04 07:31:32 -08:00
geeksville f2a731c22d update to nanopb 2020-02-03 22:22:53 -08:00
geeksville e6535f5504 we now BLE notify for the arrival of new messages 2020-02-02 20:54:40 -08:00
geeksville b799004f0d rx path to phone is written 2020-02-02 18:33:46 -08:00
geeksville 2474b3b064 progress 2020-02-01 18:45:27 -08:00
geeksville 1bda9c953e grow our app space in flash 2020-02-01 09:46:25 -08:00
geeksville 2529189a08 add beginnings of mesh radio 2020-02-01 09:05:50 -08:00
geeksville cdb7153071 move my bt experiment into its own repo (about to remove ttn) 2020-02-01 08:30:53 -08:00