add reasonable guesses for TTGO LORA V1 and V2 boards - thanks @sensorsiot

for the pinouts

bin/build-all.sh

@@ -33,6 +33,7 @@ for COUNTRY in $COUNTRIES; do
 
     export PLATFORMIO_BUILD_FLAGS="$COMMONOPTS"
 
+    do_build "ttgo-lora32-v2"
     do_build "ttgo-lora32-v1"
     do_build "tbeam"
     do_build "heltec"

platformio.ini

@@ -80,7 +80,11 @@ board = heltec_wifi_lora_32_V2
 
 [env:ttgo-lora32-v1]
 board = ttgo-lora32-v1
+build_flags = 
+  ${env.build_flags} -D TTGO_LORA_V1
 
 ; note: the platformio definition for lora32-v2 seems stale, it is missing a pins_arduino.h file, therefore I don't think it works
-; [env:ttgo-lora32-v2]
-; board = ttgo-lora32-v2
+[env:ttgo-lora32-v2]
+board = ttgo-lora32-v1
+build_flags = 
+  ${env.build_flags} -D TTGO_LORA_V2

src/configuration.h

@@ -138,12 +138,12 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define DIO0_GPIO 26
 #define DIO1_GPIO 35 // DIO1 & DIO2 are not currently used, but they must be assigned to a pin number
 #define DIO2_GPIO 34 // DIO1 & DIO2 are not currently used, but they must be assigned to a pin number
-#elif defined(ARDUINO_TTGO_LoRa32_V1)
+#elif defined(TTGO_LORA_V1)
 // This string must exactly match the case used in release file names or the android updater won't work
 #define HW_VENDOR "ttgo-lora32-v1"
 
-#define I2C_SDA 4 // I2C pins for this board
-#define I2C_SCL 15
+#define I2C_SDA 21 // I2C pins for this board
+#define I2C_SCL 22
 
 #define RESET_OLED 16 // If defined, this pin will be used to reset the display controller
 
@@ -151,24 +151,26 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define LED_PIN 2     // If defined we will blink this LED
 #define BUTTON_PIN 0  // If defined, this will be used for user button presses
 
-#define RESET_GPIO 23 // If defined, this pin will be used to reset the LORA radio
+#define RESET_GPIO 14 // If defined, this pin will be used to reset the LORA radio
 #define DIO0_GPIO 26  // IRQ line for the LORA radio
 #define DIO1_GPIO 35  // DIO1 & DIO2 are not currently used, but they must be assigned to a pin number
 #define DIO2_GPIO 34  // DIO1 & DIO2 are not currently used, but they must be assigned to a pin number
-#elif defined(ARDUINO_TTGO_LoRa32_V2)
+#elif defined(TTGO_LORA_V2)
 // This string must exactly match the case used in release file names or the android updater won't work
 #define HW_VENDOR "ttgo-lora32-v2"
 
-#define I2C_SDA 21 // I2C pins for this board
-#define I2C_SCL 22
+#define I2C_SDA 4 // I2C pins for this board
+#define I2C_SCL 15
 
 #define RESET_OLED 16 // If defined, this pin will be used to reset the display controller
 
 #define VEXT_ENABLE 21 // active low, powers the oled display and the lora antenna boost
-#define LED_PIN 2      // If defined we will blink this LED
-#define BUTTON_PIN 0   // If defined, this will be used for user button presses
+#define LED_PIN 25     // If defined we will blink this LED
+#define BUTTON_PIN                                                                                                               \
+    0 // If defined, this will be used for user button presses, if your board doesn't have a physical switch, you can wire one
+// between this pin and ground
 
-#define RESET_GPIO 23 // If defined, this pin will be used to reset the LORA radio
+#define RESET_GPIO 14 // If defined, this pin will be used to reset the LORA radio
 #define DIO0_GPIO 26  // IRQ line for the LORA radio
 #define DIO1_GPIO 35  // DIO1 & DIO2 are not currently used, but they must be assigned to a pin number
 #define DIO2_GPIO 34  // DIO1 & DIO2 are not currently used, but they must be assigned to a pin number