Pimoroni Pico Libraries and Examples

Zaktualizowano 2024-04-22 14:35:53 +00:00

CaribouLite turns any 40-pin Raspberry-Pi into a Tx/Rx 6GHz SDR

Zaktualizowano 2024-04-18 11:20:40 +00:00

rpitx is a general radio frequency transmitter for Raspberry Pi which doesn't require any other hardware unless filter to avoid intererence. It can handle frequencies from 5 KHz up to 1500 MHz.

Zaktualizowano 2024-03-12 11:45:40 +00:00

A TX-only TNC (Terminal Node Controller) to generate the AFSK (Audio Frequency-Shift Keying) audio tones for APRS (Automatic Packet Reporting System) messages using a RP2040 microcontroller on a Raspberry Pi Pico board.

Zaktualizowano 2024-01-09 20:43:19 +00:00

WSPR beacon for Raspberry Pi Pico, based on pico-hf-oscillator library. It doesn't require any hardware - Pico board itself only.

Zaktualizowano 2024-01-01 19:54:51 +00:00

Digital controlled radio frequency oscillator based on Raspberry Pi Pico (1 Hz to ~32.333 MHz band). RTTY, MFSK, freq sweep examples are included.

Zaktualizowano 2023-12-23 20:40:17 +00:00

Habitat Raspberry Pi LoRa Gateway

Zaktualizowano 2023-10-11 11:00:31 +00:00

PICO TNC is the Terminal Node Controler for Amateur Packet Radio powered by Raspberry Pi Pico. This TNC has same functionality as WB8WGA's PIC TNC.

Zaktualizowano 2023-08-18 14:32:50 +00:00

pico-debug runs on one core in a RP2040 and provides a USB CMSIS-DAP interface to debug the other core

Zaktualizowano 2022-08-03 19:41:49 +00:00

Waveshare 1.3" SH1106 OLED on a Jetson Nano , Banana Pi Zero, Raspberry Pi Zero

Zaktualizowano 2022-01-24 21:47:48 +00:00

Webserver example that came with TinyUSB slightly modified to run on a Raspberry Pi Pico. Lets the Pico pretend to be a USB Ethernet device. Runs a webinterface at http://192.168.7.1/

Zaktualizowano 2021-04-21 20:25:52 +00:00

Raspberry Pi Framebuffer Copy. This program used for copy primary framebuffer to secondary framebuffer (eg. FBTFT).

Zaktualizowano 2019-03-13 03:03:40 +00:00

Pi-FM-RDS FM-RDS transmitter using the Raspberry Pi

Zaktualizowano 2018-03-21 10:06:22 +00:00

rpidatv is a digital television transmitter for Raspberry Pi (B,B+,PI2,PI3,Pizero) which output directly to GPIO. (Created by Evariste Courjaud F5OEO. Code is GPL)

Zaktualizowano 2017-03-06 14:49:57 +00:00