Inspired by a description of an Arbitrary Waveform Generator
Zaktualizowano
U2F Zero is an open source U2F token for 2 factor authentication.
Zaktualizowano
Slowrx is an SSTV decoder for Linux.
Zaktualizowano
Ionization Chamber (a device to measure radioactivity level)
Zaktualizowano
Webserver example that came with TinyUSB slightly modified to run on a Raspberry Pi Pico. Lets the Pico pretend to be a USB Ethernet device. Runs a webinterface at http://192.168.7.1/
Zaktualizowano
DiFi++ is a small c++ header-only library for DIgital FIlters based on rational transfer functions such as the butterworth filter and the moving average filter
Zaktualizowano
An open source, embedded, high performance g-code-parser and CNC milling controller written in optimized C that will run on a straight Arduino
Zaktualizowano
uSDX smd: An effecient and lightweight HF radio
Zaktualizowano
This project is the original version of a digital VFO with analog dial display by Tj Lab(JF3HZB). ESP32 + SI5351A + OLED 1.7" 128*160
Zaktualizowano
Pecan Pico 10 - A lightweight APRS tracker and digipeater
Zaktualizowano
csdr is a command line tool to carry out DSP tasks for Software Defined Radio. included in rpitx
Zaktualizowano
THE RADIO DSP - DNR - PROJECT - Giuseppe Callipo - IK8YFW
Zaktualizowano
Raspberry Pi Framebuffer Copy. This program used for copy primary framebuffer to secondary framebuffer (eg. FBTFT).
Zaktualizowano
csdr is a command line tool to carry out DSP tasks for Software Defined Radio. It can be used to build simple signal processing flow graphs, right from the command line.
Zaktualizowano
Firmware for embroidery machines and custom stepper motors control.
Zaktualizowano
Pecan Pico 9 - A lightweight APRS tracker for balloons
Zaktualizowano
This project RadioDSP define a experimental open platform to build Real Time filtering and audio digital signal elaboration from a source audio signal in output from radio transceiver or receiver
Zaktualizowano
RS41HUP (Ham Use Project)
Zaktualizowano
rpidatv is a digital television transmitter for Raspberry Pi (B,B+,PI2,PI3,Pizero) which output directly to GPIO. (Created by Evariste Courjaud F5OEO. Code is GPL)
Zaktualizowano
This is a set of cross-platform command line tools for working with MPEG data.
Zaktualizowano