sp9unb
/
meshtastic-firmware
sforkowany z mirror/meshtastic-firmware
1
0
Forkuj 0
Kod Zgłoszenia Oczekujące zmiany Packages Projekty Wydania Wiki Aktywność
4 637 Commity
8 Gałęzie
195 Tagi
44 MiB
Wykres commitów

184 Commity (4723faa95f828ddb18c029af4556e7ef17846a0f)

Autor SHA1 Wiadomość Data
Ben Meadors c8bea4f091 Split RAK-4631 targets by base board 2021-12-07 20:42:06 -06:00
Османов Владислав Юрьевич 76791220b9 Fix radio module declaration for `NRF52_SERIES` in `variant.h`-files 2021-10-14 16:16:20 +03:00
Vladislav Osmanov 56dd3eab23 use common param name `SX126X_ANT_SW` instead of the `SX1262_ANT_SW` 2021-09-14 12:25:25 +03:00
Vladislav Osmanov 098f38fb83 New base class for SX126x modules. Added new SX1268 module support. 2021-09-12 00:35:16 +03:00
claes 5110a6de82 Battery sense for T-Echo 
Copied battery stuff from RAK4631 to T-Echo
I got the voltage divider figures for T_Echo from SoftRF at
https://github.com/lyusupov/SoftRF/blob/master/software/firmware/source/SoftRF/src/platform/nRF52.h

I dont have a T-Echo so this code
HAS NOT BEEN TESTED
 2021-08-10 10:07:40 +02:00
claes 32fea4cbd7 Fix for reading battery level on RAK-4631 
Build tested on RAK4631 with battery and their solar panel box.
This is from the log:
17:40:30 102 [Power] Battery: usbPower=0, isCharging=0, batMv=4164, batPct=96
Note that mV reading and Pct is ok.
It does not detect being connected to USB and charging.

Also tested on TBEAM where it seems to be ok.

There still seems to be a problem with the FW for this board that it goes to
sleep for ever after running for a few hours.
 2021-07-25 18:25:11 +02:00
Kevin Hester c27d479a9f t-echo: add hwmodel 2021-04-29 09:51:10 +08:00
Kevin Hester a42bb80cf4 pinelora wip 2021-04-28 14:47:29 +08:00
Kevin Hester 2a9b2d3b29 official name for t-echo board 2021-04-27 10:21:54 +08:00
Kevin Hester ec18efbe7e Add beginnings of RAK4600 and update to latest nrf52 arduino sources 2021-04-15 11:45:58 +08:00
Kevin Hester 55b38a7b02 RAK4631 is almost feature complete 2021-04-12 13:25:55 +08:00
Kevin Hester 7224782d23 rak4631: gps now works 2021-04-11 15:17:56 +08:00
Kevin Hester f7d199a3be rak4631: kinda runs 2021-04-11 13:58:48 +08:00
Kevin Hester 328b24537f rak4631: builds but WIP 2021-04-11 13:33:27 +08:00
Vadim Furman d3cbc8ea78 WIRE_INTERFACES_COUNT -> NO_WIRE 2021-03-19 18:46:11 -07:00
Vadim Furman b6e197371d Removed SX1262_USE_DIO3_FOR_TCXO 2021-03-19 18:30:00 -07:00
Vadim Furman 0c51cc3738 Fix hardware model 2021-03-17 10:56:45 -07:00
Vadim Furman ddcfff3b59 Fixed compilation on nrf52 and brownout code 2021-03-17 10:44:42 -07:00
Vadim Furman c62863b1dc Merge from origin 2021-03-14 19:42:57 -07:00
Vadim Furman 98d878cdfe Port to lora_isp4520 board 2021-03-14 19:00:20 -07:00
Kevin Hester 6e37fe6343 turn radio back on 2021-03-10 15:24:00 +08:00
Kevin Hester 5835abbcf6 fix eink leds 2021-03-09 15:06:28 +08:00
Kevin Hester 6a593e01e1 notes on eink1.0 2021-01-28 10:30:24 +08:00
Kevin Hester d1f0be215b eink leds seem a bit busted 2021-01-16 11:42:06 +08:00
Kevin Hester f110225173 Update variant file and qspi flash programming settings for new ttgoeink 
Note: bin/qspi-flash-test.sh contains a script you can use for basic
bench programming and testing of the serial spi flash over SWD
 2021-01-16 10:34:46 +08:00
Kevin Hester 51d0d0d6c5 begin new ttgo eink board 2021-01-16 09:57:55 +08:00
Kevin Hester 047df76373 move rev 0.1 of the ttgo eink board to eink0.1 2021-01-16 09:55:06 +08:00
Kevin Hester ad8bcba5ef remove hack for the othernet ppr1 rev 1 board 2020-12-13 11:54:00 +08:00
Kevin Hester 67e657f10f always print debug output to both serial and segger debug port 
cc @mc-hamster, this  makes USE_SEGGER optional on nrf52 targets
 2020-11-13 07:48:25 +08:00
Kevin Hester bbc36f7b6f switch to my new SD 7.2.0 S113 based bootloader 2020-10-31 12:22:20 +08:00
Kevin Hester 4ad562b9f4 The new 7.2.0 soft device works on nrf52833 2020-10-28 13:01:50 +08:00
Kevin Hester 1a8891c33d ppr1: add crude version of charge controller driver 2020-10-24 18:40:47 +08:00
Kevin Hester f0eeaf01d4 ppr1 lcd is 'good enough' for now 2020-10-24 09:49:14 +08:00
Kevin Hester 0767c8be03 PPR1 fix screen mirroring on LCD 2020-10-24 08:16:15 +08:00
Kevin Hester b081a6da56 ppr1 st7567 lcd kinda works now 2020-10-23 18:00:43 +08:00
Kevin Hester a102e49fdb PPR1 WIP - hacky code to make LCD talk on I2C. Works! 2020-10-23 17:10:48 +08:00
Kevin Hester e1f0e11cb8 ppr1 WIP DO NOT MERGE - will break other clients 2020-10-17 13:15:12 +08:00
Kevin Hester 22f23bb07d Merge branch 'dev' into ppr1 
# Conflicts:
#	src/gps/NMEAGPS.cpp
 2020-10-16 15:59:55 +08:00
Kevin Hester 9134faaed1 turn off segger debug in ttgo eink build 2020-10-15 16:11:40 +08:00
Kevin Hester 5f2f3c94b9 PPR1 and allow boards to set lower or higher sx1262 power limits 2020-10-15 13:47:10 +08:00
Kevin Hester ca77d48b20 corvus2 gps still doesn't work WIP 2020-10-13 14:43:28 +08:00
Kevin Hester 965c2bda8d corvus2 board builds 2020-10-13 13:59:06 +08:00
geeksville 124a82888d add power testing notes for eink 2020-09-28 17:38:36 -07:00
geeksville fec7a6bf17 add air530 gps sleep support 2020-09-28 17:04:19 -07:00
geeksville bc50b39a3b put eink screen to sleep to save power 2020-09-28 16:08:52 -07:00
geeksville 116fe6d109 eink bootloader finished 2020-09-28 15:18:32 -07:00
geeksville 6a4ef7e1d1 eink board serial flash seems to work 2020-09-28 14:10:33 -07:00
geeksville a0fd83428f eink use RESET button as regular button instead 2020-09-28 13:10:27 -07:00
geeksville e5d4fbb164 fix pins per email eink 2020-09-28 13:03:54 -07:00
geeksville 28ec0e310d make bat voltage sensing work on eink 2020-09-26 18:13:16 -07:00
geeksville 266ba03bb7 route debug output back to the CDC-ACM device instead of JLINK 2020-09-26 13:49:22 -07:00
geeksville db33200468 remove more stale eink code 2020-09-26 12:51:05 -07:00
geeksville d7fbcf89bf cleanup todo eink now ready to merge 2020-09-26 12:36:11 -07:00
geeksville a8b1bc735a remove debugging code eink gps now works 2020-09-26 12:12:50 -07:00
geeksville ba8c640d6e eink leds kinda work now 2020-09-26 10:53:02 -07:00
geeksville d88d2780f4 eink display now kinda works 2020-09-26 09:40:48 -07:00
geeksville b0bbf95b03 LORA now works on the eink board (new schematic from ttgo) 2020-09-26 07:25:32 -07:00
geeksville 772d045166 more eink notes 2020-09-25 10:41:27 -07:00
geeksville 6f77244af3 eink wip notes 2020-09-25 09:14:00 -07:00
geeksville a79aff4778 WIP - I think some pins are wrong, waiting for new schematic 2020-09-24 16:36:07 -07:00
geeksville 5fbeaee0b0 eink kinda builds 2020-09-24 14:36:43 -07:00
geeksville f1ca1ee3c0 okay basic support for @bigcorvus board is done 2020-08-29 12:46:42 -07:00
geeksville dffb6c2f06 If display is on on the @BigCorvus board and we xmit the board browns out? 2020-08-28 17:38:23 -07:00
geeksville 7f214ffbb0 TFT kinda correct now - but slow because of bit banging 2020-08-28 15:33:33 -07:00
geeksville d91ab5480f begin support for TFT displays 2020-08-17 13:47:05 -07:00
geeksville 781077e799 Turn on buck converter for @BigCorvus board, now radio works 2020-08-17 11:42:19 -07:00
geeksville 22946b5e51 @BigCorvus board now kinda boots 
###RTT Client: -----------------------------------------------
###RTT Client: Connecting to J-Link RTT Server via localhost:19021 ...
###RTT Client: Connected.

SEGGER J-Link V6.70c - Real time terminal output
SEGGER J-Link ARM V9.6, SN=69663845
Process: JLinkGDBServerCLExe
Emitting reboot packet for serial shell
I2C device found at address 0x55
done
Meshtastic swver=unset, hwver=unset
Reset reason: 0x0
FIXME, call randomSeed
ERROR: No UBLOX GPS found
Hoping that NEMA might work
RadioConfig reset!
Initial packet id 1481765933, numPacketId 4294967295
No saved preferences found
NODENUM=0xB18C3A4E, dbsize=1
Starting meshradio init...
Set radio: name=Default, config=3, ch=6, power=17
SX1262 init result 0
sending owner !df5db18c3a4e/Unknown 3a4e/?4E
Update DB node 0xB18C3A4E, rx_time=0
old user !df5db18c3a4e/Unknown 3a4e/?4E
updating changed=0 user !df5db18c3a4e/Unknown 3a4e/?4E
Adding packet record (id=0x5851F430 Fr0x4E To0xFF, WantAck0, HopLim3 Payload:User)
enqueuing for send (id=0x5851F430 Fr0x4E To0xFF, WantAck0, HopLim3 encrypted)
txGood=0,rxGood=0,rxBad=0
Starting low level send (id=0x5851F430 Fr0x4E To0xFF, WantAck0, HopLim3 encrypted)
assert failed src/mesh/SX1262Interface.cpp: 102, virtual void SX1262Interface::setStandby(), test=err == ERR_NONE
 2020-08-17 11:29:00 -07:00
geeksville 6b568ab2fb add powerhold for @bigcorvus board 2020-08-16 14:50:04 -07:00
geeksville 67bad9a689 Add SX1262 to @BigCorvus board 2020-08-16 14:20:05 -07:00
geeksville 559a790286 Add @BigCorvus board support to build 2020-08-16 14:08:31 -07:00
geeksville 08e5bd728b lorarelay wip 2020-08-16 14:07:01 -07:00
geeksville 0cfeeba2e2 add variant files by @BigCorvus 2020-08-16 13:25:24 -07:00
geeksville cb1053850d Oops - I mismerged at somepoint, restore correct PPR variant.h defs 2020-08-03 11:05:24 -07:00
geeksville acbe8c159b move rak815 variant to arduino repo 2020-07-10 12:38:11 -07:00
geeksville 5b07d454b1 WIP RAK815 now builds correctly 2020-07-10 11:29:32 -07:00
geeksville b00a936f41 WIP RAK815 support 2020-07-10 11:02:29 -07:00
geeksville 477c62082d E22 SX1262 module now works! 
Thanks mostly to an old github comment by @beegee-tokyo the fix was easy
(comment here https://github.com/jgromes/RadioLib/issues/12#issuecomment-520450429)

We now set DIO3 to 2.4 volts to power the oscillator inside the E22
module (undocumented in the E22 docs)
 2020-06-15 14:38:09 -07:00
geeksville 4b5cfaf9ba changes from bringing up PPR 2020-06-05 11:00:18 -07:00
geeksville c12fb69ca2 update protos 2020-05-10 14:17:05 -07:00
geeksville 8b911aba7f Cleanup build for NRF52 targets 2020-05-10 12:33:17 -07:00
geeksville 814c126e67 ugly WIP on switching to RadioLib, still need to set freq etc... 2020-04-29 14:54:03 -07:00
geeksville a7d153abcb CUSTOM GPIOs the SX1262MB2CAS shield when installed on the NRF52840-DK development board 2020-04-29 12:57:34 -07:00
geeksville b8b503cb0a Add starting point of PPR variants definition 2020-04-24 12:40:22 -07:00
geeksville bb885a5110 add a variant based on the nrf52840-dk but with a RC clock. 
Because I was dumb and accidentally ran some code that configured gpio 0
as an output and that was enough to smoke the xtal that was preinstalled
between P0.0 and P0.1.
 2020-04-24 12:30:06 -07:00