Add starting point of PPR variants definition

boards/ppr.json

@@ -10,7 +10,7 @@
     "hwids": [["0x239A", "0x4403"]],
     "usb_product": "PPR",
     "mcu": "nrf52840",
-    "variant": "pca10056-rc-clock",
+    "variant": "ppr",
     "variants_dir": "variants",
     "bsp": {
       "name": "adafruit"

docs/software/nrf52-TODO.md

@@ -7,7 +7,9 @@ Minimum items needed to make sure hardware is good.
 - DONE select and install a bootloader (adafruit)
 - DONE get old radio driver working on NRF52
 - DONE basic test of BLE
-- DONE get a debug 'serial' console working via the ICE passthrough feater
+- DONE get a debug 'serial' console working via the ICE passthrough feature
+- use "variants" to get all gpio bindings
+- plug in correct variants for the real board
 - Use the PMU driver on real hardware
 - add a NEMA based GPS driver to test GPS
 - Use new radio driver on real hardware - possibly start with https://os.mbed.com/teams/Semtech/code/SX126xLib/

variants/ppr/variant.cpp

@@ -0,0 +1,49 @@
+/*
+  Copyright (c) 2014-2015 Arduino LLC.  All right reserved.
+  Copyright (c) 2016 Sandeep Mistry All right reserved.
+  Copyright (c) 2018, Adafruit Industries (adafruit.com)
+
+  This library is free software; you can redistribute it and/or
+  modify it under the terms of the GNU Lesser General Public
+  License as published by the Free Software Foundation; either
+  version 2.1 of the License, or (at your option) any later version.
+
+  This library is distributed in the hope that it will be useful,
+  but WITHOUT ANY WARRANTY; without even the implied warranty of
+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+  See the GNU Lesser General Public License for more details.
+
+  You should have received a copy of the GNU Lesser General Public
+  License along with this library; if not, write to the Free Software
+  Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+*/
+
+#include "variant.h"
+#include "wiring_constants.h"
+#include "wiring_digital.h"
+#include "nrf.h"
+
+const uint32_t g_ADigitalPinMap[] =
+{
+  // P0
+  0 , 1 , 2 , 3 , 4 , 5 , 6 , 7 ,
+  8 , 9 , 10, 11, 12, 13, 14, 15,
+  16, 17, 18, 19, 20, 21, 22, 23,
+  24, 25, 26, 27, 28, 29, 30, 31,
+
+  // P1
+  32, 33, 34, 35, 36, 37, 38, 39,
+  40, 41, 42, 43, 44, 45, 46, 47
+};
+
+
+void initVariant()
+{
+  // LED1 & LED2
+  pinMode(PIN_LED1, OUTPUT);
+  ledOff(PIN_LED1);
+
+  pinMode(PIN_LED2, OUTPUT);
+  ledOff(PIN_LED2);;
+}
+

variants/ppr/variant.h

@@ -0,0 +1,138 @@
+/*
+ Copyright (c) 2014-2015 Arduino LLC.  All right reserved.
+ Copyright (c) 2016 Sandeep Mistry All right reserved.
+ Copyright (c) 2018, Adafruit Industries (adafruit.com)
+
+ This library is free software; you can redistribute it and/or
+ modify it under the terms of the GNU Lesser General Public
+ License as published by the Free Software Foundation; either
+ version 2.1 of the License, or (at your option) any later version.
+ This library is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+ See the GNU Lesser General Public License for more details.
+ You should have received a copy of the GNU Lesser General Public
+ License along with this library; if not, write to the Free Software
+ Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+*/
+
+#ifndef _VARIANT_PCA10056_
+#define _VARIANT_PCA10056_
+
+/** Master clock frequency */
+#define VARIANT_MCK (64000000ul)
+
+// This file is the same as the standard pac10056 variant, except that @geeksville broke the xtal on his devboard so
+// he has to use a RC clock.
+
+// #define USE_LFXO // Board uses 32khz crystal for LF
+#define USE_LFRC // Board uses RC for LF
+
+/*----------------------------------------------------------------------------
+ *        Headers
+ *----------------------------------------------------------------------------*/
+
+#include "WVariant.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif // __cplusplus
+
+// Number of pins defined in PinDescription array
+#define PINS_COUNT (48)
+#define NUM_DIGITAL_PINS (48)
+#define NUM_ANALOG_INPUTS (6)
+#define NUM_ANALOG_OUTPUTS (0)
+
+// LEDs
+#define PIN_LED1 (13)
+#define PIN_LED2 (14)
+
+#define LED_BUILTIN PIN_LED1
+#define LED_CONN PIN_LED2
+
+#define LED_RED PIN_LED1
+#define LED_BLUE PIN_LED2
+
+#define LED_STATE_ON 0 // State when LED is litted
+
+/*
+ * Buttons
+ */
+#define PIN_BUTTON1 11
+#define PIN_BUTTON2 12
+#define PIN_BUTTON3 24
+#define PIN_BUTTON4 25
+
+/*
+ * Analog pins
+ */
+#define PIN_A0 (3)
+#define PIN_A1 (4)
+#define PIN_A2 (28)
+#define PIN_A3 (29)
+#define PIN_A4 (30)
+#define PIN_A5 (31)
+#define PIN_A6 (0xff)
+#define PIN_A7 (0xff)
+
+static const uint8_t A0 = PIN_A0;
+static const uint8_t A1 = PIN_A1;
+static const uint8_t A2 = PIN_A2;
+static const uint8_t A3 = PIN_A3;
+static const uint8_t A4 = PIN_A4;
+static const uint8_t A5 = PIN_A5;
+static const uint8_t A6 = PIN_A6;
+static const uint8_t A7 = PIN_A7;
+#define ADC_RESOLUTION 14
+
+// Other pins
+#define PIN_AREF (2)
+#define PIN_NFC1 (9)
+#define PIN_NFC2 (10)
+
+static const uint8_t AREF = PIN_AREF;
+
+/*
+ * Serial interfaces
+ */
+
+// Arduino Header D0, D1
+#define PIN_SERIAL1_RX (33) // P1.01
+#define PIN_SERIAL1_TX (34) // P1.02
+
+// Connected to Jlink CDC
+#define PIN_SERIAL2_RX (8)
+#define PIN_SERIAL2_TX (6)
+
+/*
+ * SPI Interfaces
+ */
+#define SPI_INTERFACES_COUNT 1
+
+#define PIN_SPI_MISO (46)
+#define PIN_SPI_MOSI (45)
+#define PIN_SPI_SCK (47)
+
+static const uint8_t SS = 44;
+static const uint8_t MOSI = PIN_SPI_MOSI;
+static const uint8_t MISO = PIN_SPI_MISO;
+static const uint8_t SCK = PIN_SPI_SCK;
+
+/*
+ * Wire Interfaces
+ */
+#define WIRE_INTERFACES_COUNT 1
+
+#define PIN_WIRE_SDA (26)
+#define PIN_WIRE_SCL (27)
+
+#ifdef __cplusplus
+}
+#endif
+
+/*----------------------------------------------------------------------------
+ *        Arduino objects - C++ only
+ *----------------------------------------------------------------------------*/
+
+#endif