mirror
/
sane-project-backends
kopia lustrzana https://gitlab.com/sane-project/backends
1
0
Forkuj 0
Kod Zgłoszenia Projekty Wydania Wiki Aktywność
8 701 Commity
32 Gałęzie
59 Tagi
58 MiB
Wykres commitów

3662 Commity (cb3090cb5472b63d5cdfb5110652f568bd9477ad)

Autor SHA1 Wiadomość Data
Rolf Bensch 4a83d9c8a4 Pixma backend version 0.17.24 2015-10-14 19:04:27 +02:00
Rolf Bensch 3095ab46c4 new scanners Canon PIXUS MP5/SmartBase MPC190/imageCLASS MPC190 and Canon MP10/SmartBase MPC200/imageCLASS MPC200 2015-10-14 19:02:43 +02:00
Olaf Meeuwissen 06b865cfd2 Prevent possible buffer overflows [-Wstrncat-size]. Fixes 315198 2015-10-14 20:39:39 +09:00
m. allan noah 56e69f0998 added kvs1025.conf.in and utsushi.desc 2015-10-05 08:21:39 -04:00
m. allan noah 2ecf18f6fb autoheader and automake 
After recent PNG and SNMP changes, need to run autoheader and automake
 2015-10-02 21:53:14 -04:00
Alessandro Zummo 5c713413a0 epson2: added a missing include 2015-10-01 01:26:38 +02:00
m. allan noah 3403daef2e Make sequence point warning go away 
See f219f7fb for details.
 2015-09-28 21:16:28 -04:00
Olaf Meeuwissen e8586d8364 Use SNMP compiler flags and libraries only where needed 
The compiler flags would take effect for every single compilation unit
and the libraries would be linked to every single backend/executable.
 2015-09-28 21:16:07 -04:00
Olaf Meeuwissen 219a877858 net: Add mutex lock logic around device additions 
The avahi_thread may call add_device() as well.  This addresses a
concern raised in 313921 and may fix 314696 as well as 315044.
 2015-09-28 21:16:07 -04:00
Johannes Meixner f219f7fbd8 Make sequence-point warning go away. "Fixes" 311857 
Sample code that mimicks the offending code gave identical run-time
results when compiled with gcc-4.9.2 and clang-3.5.0.  Rewriting the
sample code so that results matched both compilers was used to check
the validity of this change.
 2015-09-28 20:40:51 +09:00
Rolf Bensch cbae0ea53b Pixma backend version 0.17.23 2015-09-26 10:10:38 +02:00
Olaf Meeuwissen ba1e395c66 Fix size_t printf format warnings 2015-09-25 20:53:42 -04:00
Olaf Meeuwissen 4c49c87827 Fix mixed declarations and code warnings (ISO C90) 2015-09-25 20:53:42 -04:00
Olaf Meeuwissen 22b17e232a Fix various types of unused variable warnings 2015-09-25 20:53:42 -04:00
Alessandro Zummo 86ba3c634f epson2: updated supported scanners 2015-09-22 00:44:38 +02:00
m. allan noah 87bfd53512 Run autofoo for recent changes 2015-09-19 13:39:38 -04:00
Olaf Meeuwissen 20a0ed547e [epson/epson2] Use separate lists of supported USB devices 
The epson and epson2 backends shared a list of supported USB devices
generated from the epson2.desc file.  The epson backend doesn't even
claim to support a large number of the devices listed there.   This
change makes the backends use their own lists, generated from their
own *.desc files.
 2015-09-19 13:39:37 -04:00
Olaf Meeuwissen 1c2b28307f Prevent access to memory that was not allocated 2015-09-19 13:39:37 -04:00
Olaf Meeuwissen f152b40faf Prefer string concatenation over copying 
The `ibuf.product` byte array may contain embedded NUL characters.  In
that case the revision will not be visible as part of dev->sane.model.
 2015-09-19 13:39:37 -04:00
Ilya Gordeev 16dc9c87a6 Fix memory clobbering issue in sane.model creation 2015-09-19 13:39:37 -04:00
Ilya Gordeev 98e4ee4084 Fix out-of-bounds array access 2015-09-19 13:39:37 -04:00
m. allan noah a1a04f7462 Use c90 compatible comments 2015-09-19 13:39:37 -04:00
Olaf Meeuwissen 9dd31f977c Move test on first array element into the loop 2015-09-19 12:02:57 -04:00
Sandro Mani 898270810d Fix string type option descriptor's size value 2015-09-19 12:02:57 -04:00
Eduard - Gabriel Munteanu ac1bf8d754 magicolor: add support for magicolor 4690MF 
Currently, this works for USB, but the network OID needs to be
filled in properly.

Signed-off-by: Eduard - Gabriel Munteanu <edgmnt@gmail.com>
 2015-09-19 12:02:57 -04:00
Eduard - Gabriel Munteanu afd22f7722 magicolor: complete support for duplex ADF 
This is needed to fully-support scanners like magicolor 4960MF.

Signed-off-by: Eduard - Gabriel Munteanu <edgmnt@gmail.com>
 2015-09-19 12:02:57 -04:00
Eduard - Gabriel Munteanu d0c3b22d7d magicolor: fix USB device detection 
Only the generic device was being picked.

Signed-off-by: Eduard - Gabriel Munteanu <edgmnt@gmail.com>
 2015-09-19 12:02:57 -04:00
Rolf Bensch 348d59f859 fix typo in debug output 2015-09-18 08:55:25 +02:00
Rolf Bensch d0745a10da for all adf scanners restrict maximum page height for flatbed scans 2015-09-18 08:52:36 +02:00
Stéphane Voltz 2fd04ccf84 warning fixes 2015-09-16 18:57:03 +02:00
Stéphane Voltz 65747277cc ifdef'ed temporaly disabled code since 2004 2015-09-16 18:38:11 +02:00
Stéphane Voltz 35d7d39550 Merge remote-tracking branch 'gitlab/pu/protect-niash-option-access-315132' into niash 2015-09-16 18:16:55 +02:00
Stéphane Voltz 45df679214 fix stdup declaration 
- we need to include sane/config.h first  to use strdup
 2015-09-16 17:49:45 +02:00
Olaf Meeuwissen db83bf44de niash.c: Add argument screening to sane_control_option 
This prevents access to non-existing array elements as well as
potential NULL dereferences.

Fixes #315132.
 2015-09-14 18:24:39 +09:00
Stéphane Voltz 6c7f9f6a3b fix #300134 and file test logic 
- mktmp never returns NULL, so test logic was borken
- use mkstemp instead of mktemp
 2015-09-14 06:46:51 +02:00
Paul Newall 26572efbd1 redundant variable bitposn and redundant function kodakaio_rxflush commented out 2015-09-13 19:34:17 +01:00
Alessandro Zummo 2e15add10a epsonds: fixed comment about usb ids format 2015-09-10 17:13:33 +02:00
Alessandro Zummo d9e4ff311a epson2: fixed comment about usb ids format 2015-09-10 17:12:32 +02:00
Alessandro Zummo bd93d92a93 epson2: fix resolutions for Epson 4870/4990 2015-09-10 16:48:11 +02:00
Alessandro Zummo a5c2607755 epson2: upated supported models 2015-09-10 16:09:40 +02:00
m. allan noah f8725993d3 artec_eplus48u.c: fix HOME env bug #315071 (from Jörg Frings-Fürst) 2015-09-08 21:52:02 -04:00
Rolf Bensch 697d834023 Pixma backend version 0.17.22 2015-09-03 20:09:46 +02:00
Rolf Bensch af4b717297 MP990 needs specific reordering pixels for 4800 dpi 2015-09-03 20:07:17 +02:00
m. allan noah 7566619e53 rebuild with automake 1.14.1 2015-08-31 20:58:30 -04:00
Yuri Chornoivan 648d933c56 Fix minor typos in messages and comments 2015-08-31 20:31:54 -04:00
Niels Ole Salscheider e47cb8d2b4 Do not use STRINGIFY for LIBDIR but pass "LIBDIR" from build system 2015-08-31 20:31:54 -04:00
Klaus Kämpf 5337625f3a New backend pieusb 
This commit adds support for (slide) scanners based
on Pacific Image Electronics (PIE) oem scan hardware.

It is known to match the following USB scanners

  PIE PowerSlide 3600       Untested
  PIE PowerSlide 3650       Untested
  PIE PowerSlide 4000       Untested
  PIE PowerSlide 5000       Untested
  Reflecta CrystalScan 7200 Untested
  Reflecta ProScan 7200     Untested
  Reflecta DigitDia 4000    Untested
  Reflecta DigitDia 5000    Untested
  Reflecta DigitDia 6000    Ok

The backend is based on work by Jan Vleeshouwers and Michael Rickmann.

Special thanks to Stéphane Voltz for the code review.

Add pieusb to backend/Makefile.am
Add pieusb to doc/Makefile.am
Add missing sanei/sanei_ir.c, sanei/sanei_ir.h, adapt Makefile.am
configure.ac: Add 'pieusb' to ALL_BACKENDS
ChangeLog: Add pieusb as new backend
Mark infrared functions as internal: sane_ir_* -> sanei_ir_*
sanei/sanei_ir.c: fix memory leaks
pieusb: rename cmdGetMode and cmdSetScanHead
	... to their sanei_pieusb_cmd_... equivalent
pieusb: rename definition_list_head to pieusb_definition_list_head
Add pieusb to AUTHORS
pieusb: copyright 2012-2015
pieusb: don't include sanei_thread.h
 2015-08-31 21:07:12 +02:00
m. allan noah 9ca9cd2f56 fujitsu backend v127 
- separate iX100 from iX500 settings
- iX100 has gray and lineart
 2015-08-25 19:49:37 -04:00
m. allan noah 8516da91b4 canon_dr backend v51 
- DR-C125 does not invert_tly, does need sw_lut
 2015-08-25 19:33:51 -04:00
m. allan noah 2cb3140903 fujitsu backend v126 
- initial support for iX100
- add late_lut support for iX500/iX100
 2015-08-23 20:52:49 -04:00
m. allan noah 2f68498ee5 canon_dr backend v1.0.50 
- DR-C125 adds duplex padding on back side
- initial support for DR-C225
 2015-08-23 20:52:49 -04:00
Rolf Bensch 12bca33625 Pixma backend version 0.17.21 2015-08-10 23:20:56 +02:00
Rolf Bensch 2f4c0c16c4 EOF is a bjnp timeout error 2015-08-10 23:19:58 +02:00
Stéphane Voltz 6e9f6de1bc fix for #300132 
- free memory allocated by sane_get_devices()
 2015-08-10 21:49:38 +02:00
Stéphane Voltz e8c11a0849 fix for #300131 
- free memory allocated by sane_get_devices()
 2015-08-10 21:47:41 +02:00
Stéphane Voltz c3f0904b80 fix for #300130 
- free memory allocated by sane_get_devices()
 2015-08-10 21:42:09 +02:00
Stéphane Voltz f73b2e3dbf fix for #300129 
- free memory allocated by sane_get_devices()
 2015-08-10 21:38:16 +02:00
Stéphane Voltz 39695d73c2 fix for #300127 
- free memory allocated by sane_get_devices()
 2015-08-10 21:34:24 +02:00
Stéphane Voltz 7fb21d541a fix for #300126 
- free memory allocated by sane_get_devices()
 2015-08-10 21:30:19 +02:00
Stéphane Voltz 5129434b99 fix for #300124 
- free memory allocated by sane_get_devices()
 2015-08-10 21:27:33 +02:00
Stéphane Voltz 0e78307bdc fix for #300122 
- free device list allocated in sane_get_devices()
 2015-08-10 21:20:26 +02:00
Stéphane Voltz c39bc5ac07 fix for #300121 
- free device list allocated in sane_get_devices()
 2015-08-10 21:18:15 +02:00
Stéphane Voltz debdba5b8c fix for #300120 
- free device list allocated in sane_get_devices()
 2015-08-08 22:04:37 +02:00
Stéphane Voltz 1f1385ea67 fix memleaks in pnm backend 
- fix memleaks reported in bug #313553
 2015-08-08 21:31:05 +02:00
Rolf Bensch 9188678fc0 Pixma backend version 0.17.20 2015-08-07 23:21:04 +02:00
Rolf Bensch 3133c5e17a EOF isn't an usb timeout error 
- this fixes usb communication problems e.g. with OpenSuse
- revoke parts of 3c5cc2a and cea03f3
 2015-08-07 23:19:33 +02:00
Stéphane Voltz 425edc705e more timing issue fixing 
- add another usleep() to take care of LiDE 1110/210 scan issue on some
	hardware (fast ones ?).
 2015-08-06 09:06:10 +02:00
Stéphane Voltz bf65dbdd9c no color filter when using LEDADD 2015-08-06 09:01:35 +02:00
Stéphane Voltz e38641eaef fix LiDE35 GPIO setup 2015-08-06 09:01:35 +02:00
Stéphane Voltz f3914a544e fix type in lEDDADD code path 2015-08-06 09:01:35 +02:00
Alessandro Zummo d0e7675e60 epson2: added support for Perfection V800 (Nick Stroustrup) 2015-07-31 22:01:19 +02:00
Stéphane Voltz 4eea901305 fix for #315104 
- allocate gamma tables even if 'warm' boot
 2015-07-31 08:10:13 +02:00
Stéphane Voltz 09daef4a68 timing issue fix 
- fix a timing issue on USB3 hardware (or maybe on fast recent hardware)
	debugged and tracked by John S. Weber <jweber53@gmail.com>
 2015-07-30 14:28:53 +02:00
Stéphane Voltz 00c9ac83bf disable despeckle parameter at init 
- since swdespeck is disabled at init, also disable despeckle diameter
 2015-07-30 14:01:13 +02:00
Stéphane Voltz 82adbf6ad2 use fabs for floating point numbers 2015-07-30 14:01:13 +02:00
Rolf Bensch 061df1202b Pixma backend version 0.17.19 2015-07-29 19:10:02 +02:00
Rolf Bensch e9155caf1e MG7500 doesn't need special image format post processing 2015-07-29 19:07:04 +02:00
Rolf Bensch e9f161895d new scanner Canon PIXMA MG3600 Series 2015-07-29 19:05:54 +02:00
Louis Lagendijk 43bca22e0c backend/sane_pixma.c: added missing return in case there is no error 2015-06-27 19:04:45 +02:00
Louis Lagendijk 50a85b744c Added backend version in debug output of pixma_bjnp.c 2015-06-27 18:19:31 +02:00
Stéphane Voltz 8c515798a6 some LiDE 120 support improvement 2015-06-11 21:26:07 +02:00
Rolf Bensch 7491584574 Pixma backend version 0.17.18 2015-05-18 22:51:02 +02:00
Rolf Bensch 0ab1f99f63 new scanner Canon i-SENSYS MF8300 Series 2015-05-18 22:49:58 +02:00
Alessandro Zummo 980b4f6b06 epson2: fix compilation error 2015-05-15 20:01:32 +02:00
Alessandro Zummo 10c5ec697b epsonds: streamlined device detection 2015-05-13 00:01:24 +02:00
Alessandro Zummo 66a15edbcf epson2: consolidate cleanup 2015-05-12 03:18:37 +02:00
Alessandro Zummo 025f886f4b epson2: fix error message 2015-05-12 03:10:22 +02:00
Alessandro Zummo b2aefab4cb epsonds: enable double feed detection 2015-04-26 23:11:37 +02:00
Alessandro Zummo ccd15dc966 Revert "epsonds: enable double feed detection" 
This reverts commit 005c3928a5.
 2015-04-26 23:09:08 +02:00
Alessandro Zummo 005c3928a5 epsonds: enable double feed detection 2015-04-26 22:44:01 +02:00
Stéphane Voltz f6896e0de4 use expiration time option 
- use expiration  time option value to managed cached entries
- changelog for genesys build #2506
 2015-04-12 10:14:50 +02:00
Stéphane Voltz 1549a56b75 add cache expiration time option 2015-04-12 09:53:38 +02:00
Stéphane Voltz a039e9efd1 don't clear cache when loading cache file 
- don't clear just loaded cache entries when loading another cache file
- improve logging
 2015-04-12 08:55:24 +02:00
Alessandro Zummo 2aed026154 epsonds: use maximum area for ADF 2015-04-08 02:29:20 +02:00
Alessandro Zummo 0d6f925e75 epsonds: support resolution ranges in pleace of a fixed list on selected scanners 2015-04-08 01:37:54 +02:00
Alessandro Zummo f9e3a6e871 epsonds: fix Makefile.in 2015-04-08 00:21:59 +02:00
Rolf Bensch 6ca6d038e3 Pixma backend version 0.17.17 2015-04-07 22:04:56 +02:00
Rolf Bensch 0bddd4cb09 fix MP990 TPU scan 2015-04-07 22:01:38 +02:00
Alessandro Zummo 02ae5c07ea epsonds: optimize the img callback 2015-04-07 00:20:43 +02:00
Alessandro Zummo 225e00ceae epsonds: send scanning parameter all at once 2015-04-07 00:20:43 +02:00
Alessandro Zummo c3545da14d epsonds: code cleanup, fix initial hang 2015-04-07 00:20:43 +02:00
Alessandro Zummo d72f4663c0 epsonds: driver for Epson ESC/I-2 scanners 2015-04-07 00:20:43 +02:00
Rolf Bensch c063b8fa8f update copyright 2015-04-03 19:19:02 +02:00
Rolf Bensch 858e73da7e Pixma backend version 0.17.16 2015-04-03 19:09:34 +02:00
Rolf Bensch 9241d3ec28 new Canon scanners MF210, MF220, MF810/820, MF5900 and MF6100 
all scanners need further testing
 2015-04-03 19:07:57 +02:00
m. allan noah 0177d39642 epjitsu backend v28 
call get_hardware_status before starting scan
 2015-03-23 20:52:54 -04:00
m. allan noah 71ffcfe30e canon_dr backend v49 
initial support for DR-C125 and possibly DR-C225
 2015-03-18 20:49:15 -04:00
Stéphane Voltz 128c8931b3 add putative support for LiDE 120 2015-03-17 22:23:21 +01:00
Alessandro Zummo 5d3c2edb8f epson2: fixed depth > 8bit (thanks to Thomas M.) 2015-03-15 01:18:36 +01:00
Alessandro Zummo a73d9e1ab0 epson2: cancel requests were not handled correctly 2015-03-15 01:18:36 +01:00
René Rebe ca97cb22bd reverted 4d38523bda, the long commit message 
is a nice fairy tale, not more - of course the ponter deref copies the whole
params, and most other packends do it the same way: grep *params *.c, and
consult your local C "assembler frontend" bible, ...
 2015-03-07 18:56:54 +00:00
René Rebe 9511c27e59 fixed new avision feature bits for 32-bit build 2015-03-07 18:51:14 +00:00
René Rebe f69a1ad50e removed unnecessary feature_type2 clutter by using a uint64_t to share all bits 2015-03-07 11:16:47 +00:00
René Rebe e05607323d fixed duplex for some avision scanners 2015-03-07 10:50:36 +00:00
René Rebe d5c7e22328 fixed multiple Avision regressions: most scanner basically did not 
work at all anymore, ... range initilaizer, clobbering paper-length
window bits, ...) introduced over the past years, added support for
newer ASIC gamma table size, added AV220D2+ ID
 2015-03-07 05:07:27 +00:00
m. allan noah 15deba5c57 epjitsu backend v27 
- don't override br_x and br_y
- call change_params after changing page_width
 2015-03-02 20:31:46 -05:00
Stéphane Voltz f5e4a4bf8e improve LiDE 210 head parking reliability 2015-03-02 21:08:31 +01:00
Stéphane Voltz 0f990e4a99 add reverse parameter to gl124_feed 2015-03-02 17:35:20 +01:00
Stéphane Voltz debf0101f7 improve park failure detection 2015-03-02 17:25:22 +01:00
Stéphane Voltz 1eb35fe4cb final tuning for LiDE 220 support 2015-03-01 21:43:08 +01:00
Stéphane Voltz 470594e18b initial support for LiDE 220 2015-02-26 22:26:00 +01:00
Rolf Bensch f78057e8db Pixma backend version 0.17.15 2015-02-21 11:20:41 +01:00
Rolf Bensch 7d7025838e new scanners Canon PIXMA MX490 Series and E480 Series 2015-02-21 11:18:40 +01:00
Rolf Bensch bf60fd1f61 MG6400 doesn't need special image format post processing 2015-02-21 10:34:52 +01:00
Ilia Sotnikov 9d9cefb7a7 * Invert pixels in case of TMA Negatives source has been selected. 
Thanks for Will Kranz who reported this.
 2015-01-20 12:33:49 +03:00
Paul Newall 6b1455a8cf kodakaio device connection and disconnection moved to sane_start and sane_cancel to fix bug when scanner disconnected after 30s idle 2014-12-31 10:26:07 +00:00
Paul Newall 06fae35262 kodakaio params.depth corrected for lineart, color mode made the default. 2014-12-19 22:52:48 +00:00
m. allan noah 67417622cb bump version number of fujitsu backend 2014-12-16 08:29:58 -05:00
m. allan noah fb8693bf09 fujitsu: remove command counting code 
This code was a crude workaround for a problem with a
better solution at the USB library layer. Remove it.
 2014-12-12 20:40:07 -05:00
m. allan noah a429b8a0ed fujitsu backend v124 
- support resolution controlled max page-height (fi-6/7xxx scanners)
- reorder scanner sections in init_model chronologically
 2014-12-09 20:52:06 -05:00
Rolf Bensch e1f7a7d452 Pixma backend version 0.17.14 2014-11-18 09:16:37 +01:00
Rolf Bensch 5e7dc373c8 MF8200C: ADF supports max. 300DPI 
- use adftpu_max_dpi to set max. resolution for ADF
 2014-11-18 09:14:46 +01:00
Rolf Bensch 98125c97d6 mf8[25]00 use generation 2 protocols 2014-11-18 09:04:18 +01:00
Rolf Bensch 1fa16a1aab also use has_paper() for generation 2 scanners 2014-11-18 09:03:13 +01:00
Rolf Bensch 681c8366b5 Remove firmware checking for HP5370c scanners 2014-11-15 14:40:49 +01:00
m. allan noah 7a590f362e fujitsu backend v123 
workaround Linux USB3 bugs by adding command counting code and
sending an even number of reads and writes during disconnect_fd
 2014-11-06 20:48:40 -05:00
Rolf Bensch ccdd519ece Pixma backend version 0.17.13 2014-10-29 09:16:06 +01:00
Rolf Bensch fdfde41ed1 new Canon scanners 
MAXIFY MB5000, MB5300, MB2000, MB2300
  PIXMA MG7500, MG6600, MG5600, MG2900, E460
  *all scanners need further testing*
 2014-10-29 09:14:50 +01:00
m. allan noah 41c31ac0e9 fujitsu backend v122 
- add support for object_position halt
- call object_position halt in check_for_cancel when requested
 2014-10-28 19:19:46 -04:00
Rolf Bensch 869e3f75a6 Pixma backend version 0.17.12 2014-10-27 17:17:07 +01:00
Rolf Bensch 027f9e4ed4 MG3500 doesn't need special image post processing 2014-10-27 16:04:22 +01:00
Rolf Bensch a93c243c26 calibration can finish with 0x01 or 0x02 2014-10-20 17:56:46 +02:00
Rolf Bensch b7e8e035a4 increase calibration timeout 2014-10-20 17:54:46 +02:00
Rolf Bensch a69a613a25 new scanner imageCLASS D530 2014-10-20 17:14:23 +02:00
Rolf Bensch 54358f27e1 Canon Pixma MG5500 Series is working 2014-09-18 21:54:28 +02:00
Rolf Bensch cb25926d05 Pixma backend version 0.17.11 2014-09-16 11:47:27 +02:00
Rolf Bensch ea54338db7 MX530 doesn't need image post processing 2014-09-16 11:18:12 +02:00
Paul Newall d2bbf502c7 kodakaio: Added lineart mode and threshold option. 2014-09-13 23:26:04 +01:00
Paul Newall 4a49f58700 Fixed colour compensation error in kodakaio 2014-09-07 13:38:58 +01:00
Louis Lagendijk b4856a8a31 pixma_bjnp.c: added explicit error message for the case where the 
scanner closes the TCP-connection
 2014-08-23 14:36:05 +02:00
Louis Lagendijk 3ce1cec6a3 pixma_bjnp.c: Open TCP-connection only from bjnp_activate. bjnp_open should not intiate 
a connection. This solves issues where the scanner closes it's TCP-connection after a
period of no activity.
 2014-08-23 14:25:56 +02:00
Rolf Bensch a3a2d2038d MX720 has button support 2014-08-16 21:56:46 +02:00
Rolf Bensch 1afd805389 MX720 doesn't need image post processing 2014-08-16 16:45:06 +02:00
Rolf Bensch 7908858a3a MX720 has duplex adf 2014-08-16 16:44:02 +02:00
Rolf Bensch 99eac9c6eb Pixma backend version 0.17.10 2014-08-16 12:25:55 +02:00
Rolf Bensch 3f6a17bcbd new scanners Canon i-SENSYS MF8200C Series and MF8500C Series 2014-08-16 12:15:36 +02:00
m. allan noah 1e04f18ed1 canon_dr backend v48 
- set another unknown byte in buffermode for ssm2
- add another gettimeofday call at end of do_usb_cmd
- don't print 0 length line in hexdump
- mark DR-7080C as working
- default DR-G1100 and DR-G1130 to 8 meg buffers
 2014-08-06 21:42:00 -04:00
m. allan noah 68bc35d36a fujitsu: don't print 0 length line in hexdump 2014-08-06 21:42:00 -04:00
Rolf Bensch a0e2df7254 new scanners Canon Pixma E400, E560, MX470 and MX530 2014-07-25 20:51:53 +02:00
m. allan noah 44bdd65b51 canon_dr backend v47 
initial DR-G1130 support
add usb ids for many recent scanners
 2014-07-14 20:02:05 -04:00
m. allan noah 683f6d71f4 epjitsu backend v26 
- add resolution scaling
- fix 150 dpi settings for fi-60F and fi-65F
- make adf_height_padding variable
- make white_factor variable
 2014-07-02 09:48:55 -04:00
Stéphane Voltz 42e3246117 fix gain calibration 
- enable GMMENB during calibration scan in simple_scan, otherwise there
  is 'color clamping' with default asic table
 2014-06-29 08:38:48 +02:00
m. allan noah a7aa92f54d epjitsu backend v25 
- initial support for fi-65F
- initial support for S1100
 2014-06-12 21:25:14 -04:00
Stéphane Voltz aed140364e move to init_scan_regs generic interface 2014-06-02 06:23:17 +02:00
Stéphane Voltz fab55c629d ensure target speed is reached 
- in case the motor profile table doesn't contain target speed, add it
  to have accurate scanning resolution
 2014-06-02 06:19:29 +02:00
Stéphane Voltz 675285ef8d do usb_reset each time for all ASICs 2014-06-02 06:19:29 +02:00
Stéphane Voltz e2dbc97b7f fix 600 to 4800 dpi gray scan geometry 
- use correct slope table allowing gray scan speeds
 2014-06-02 06:19:29 +02:00
Stéphane Voltz 289b747106 no special case for high speed moving 2014-06-02 06:19:29 +02:00
Stéphane Voltz e9a6a35a87 better slope target trace message 2014-06-02 06:19:28 +02:00
Stéphane Voltz 79f791589e define and update specific LiDE 110 table 
- create working values for 1200/2400 gray dpi scans
 2014-06-02 06:19:28 +02:00
Stéphane Voltz f73440f5a6 raise build number 2014-06-02 06:19:28 +02:00
Stéphane Voltz 23c8bc461b improve 600 dpi gray scans 
- define LiDE 110 specific table for 600 dpi
- extend it to reach right dpi
 2014-06-02 06:19:28 +02:00
Stéphane Voltz 3b0d8728f3 use generic slope table generation for gl124 2014-06-02 06:19:28 +02:00
Stéphane Voltz c2e1bd6b4d add init_scan_regs function to internal API 
- define a common scan register setting function
- start to move gl124.C to generic motor slope handling
 2014-06-02 06:19:28 +02:00
Stéphane Voltz 5f166f1016 improve UTA detection by updating hardware sensors 
- call sensor hardware update earlier to detect XPA at open time
 2014-06-02 06:19:28 +02:00
Stéphane Voltz 1ec94972b9 usb reset for gl646 on sane_exit 
- improves reliability by resetting usb device on leaving
 2014-06-02 06:19:28 +02:00
m. allan noah af80354325 epjitsu backend v24 
enable fine calibration for S1300i 225 & 300 dpi, and S300 150 dpi
 2014-06-01 08:31:21 -04:00
Paul Newall f67f37ec19 kodakaio.c comments on configure parameters have test backend added 2014-05-30 21:19:13 +01:00
m. allan noah bac4009627 epjitsu backend v23 
- add S1300i support
- fix buffer overruns in read_from_scanner
- set default page width
- simplified the 225x200 resolution code
 2014-05-27 21:42:17 -04:00
Rolf Bensch 8316417ed9 Pixma backend version 0.17.9 2014-05-26 19:04:23 +02:00
Rolf Bensch 8d192503f7 remove unused variable 2014-05-26 18:56:37 +02:00
Rolf Bensch c495f5a5af fix ADF paper empty @ start scanning 2014-05-26 18:38:54 +02:00
Rolf Bensch 94958e04e0 Pixma backend version 0.17.8 2014-05-16 15:40:52 +02:00
Rolf Bensch e8c9b727bd fix MG7100 image data post processing @ high resolutions > 600dpi 2014-05-16 15:36:30 +02:00
Mark Buda c591d2b7da Correction of some spelling/grammatical errors in source code 2014-05-15 22:04:37 -04:00
Peter Marschall bcd232fb41 epjitsu: add Fujitsu S1300i to epjitsu.conf.in 2014-05-15 22:04:36 -04:00
Peter Marschall 40f74dd208 epjitsu: document how to extract .nal files in Linux 
In Fujitsu ScanSnap installation DVDs the .nal firmware files required
for the epjitsu backend to work are located in cabinet files.

The script snippet locates these cabinet files on the DVD and extracts all
.nal files it finds.
 2014-05-15 22:04:36 -04:00
Peter Marschall 2d438531b1 epjitsu.c: add/fix a few comments 2014-05-15 22:04:36 -04:00
Hiroshi Miura a4cff1c9e2 epjitsu: implement get_gcd 
Signed-off-by: Hiroshi Miura <miurahr@linux.com>
 2014-05-15 22:04:36 -04:00
Hiroshi Miura bc459dea9d epjitsu: ScanSnap S1100 support 
Add S1100 support

The ideas and cmd data are comes from:
http://ubuntuforums.org/showthread.php?t=1678335

TBD: test on S1100, I don't have a machine.
 2014-05-15 22:04:36 -04:00
Hiroshi Miura ceeb9bb2d3 epjitsu: refactor coarsecal() 
Now refactoring coarsecal() for S1100 support.
it is carefully changed not to break S300/1300/1500.

the chunk come from http://ubuntuforums.org/showthread.php?t=1678335
 2014-05-15 22:04:36 -04:00
Hiroshi Miura e6abe74b5c epjitsu: introduce object_position() 
Rename ingest() to object_position()
now it can do both ingest and eject.
This is required by S1100 support.

chunk come from
http://ubuntuforums.org/showthread.php?t=1678335
 2014-05-15 22:04:36 -04:00
Hiroshi Miura 2f7c6382f4 epjitsu: x,y_resolution difference treatment 
ScanScanp has a resolution 225x200 in each model.

The function which treat it should use a mathematic theory.
Euclidean algorithm should be used to get GCD (Greatest Common Devisor)
for this calcuration.

This patch make a separate function that should be get_GCD and
simplize a logic in copy image function.

TBD: this don't have Euclidean algorithm. Just prepare for it.

Signed-off-by: Hiroshi Miura <miurahr@linux.com>
 2014-05-15 22:04:36 -04:00
Hiroshi Miura 25947781ec epjitsu: tl_y parameter support 
The driver can cut top of image for padding.
We can also cut an ordered size at a top of image.
It make tl_y parameter works.

Signed-off-by: Hiroshi Miura <miurahr@linux.com>
 2014-05-15 22:04:36 -04:00
Hiroshi Miura 529a7611d2 epjitsu: skip top padding 
The driver need a padding at top of page.
Because scansnap don't treat empty image
at the top of image that is generated when
loading paper, the driver cut top of page
in 1/2 inch.

Signed-off-by: Hiroshi Miura <miurahr@linux.com>
 2014-05-15 22:04:36 -04:00
Hiroshi Miura 5ab232d3a6 epjitsu: fix indent 
Signed-off-by: Hiroshi Miura <miurahr@linux.com>
 2014-05-15 22:04:36 -04:00
Hiroshi Miura f3d5455e9a epjitsu: optimize loop 
Signed-off-by: Hiroshi Miura <miurahr@linux.com>
 2014-05-15 22:04:36 -04:00
Hiroshi Miura 9f1542afc6 epjitsu: page width support 
ScanSnap itself don't have a feature to
detect and scan area in demanded width.
Otherwise driver need to cut into proper width.

this introduce page_width parameter and facility
to cut image into page width.

Signed-off-by: Hiroshi Miura <miurahr@linux.com>
 2014-05-15 22:04:36 -04:00
Hiroshi Miura 8ef91bb06d epjitsu: unit convert macro 
introducing macros converting between scanner unit
and inches each other.

Signed-off-by: Hiroshi Miura <miurahr@linux.com>
 2014-05-15 22:04:36 -04:00
Stéphane Voltz 0694698fd8 enable gamma only at scan time 2014-05-12 22:02:06 +02:00
Stéphane Voltz cced79e963 fix #314663 
- bug was due to an off by one in gamma table copy
 2014-05-12 21:39:16 +02:00
Stéphane Voltz b51673a252 debug cleanups 
- cleanup some debug messages
- prepare for new internal scan API
 2014-05-11 09:24:16 +02:00
Stéphane Voltz ee4cd1cdc4 halt endpoint properly before resetting 2014-05-10 08:50:45 +02:00
Rolf Bensch 3b0861b3bd Pixma backend version 0.17.7 2014-05-08 19:46:50 +02:00
Rolf Bensch b4d7533ae3 fix adf paper empty bug 
- new parameter mp->adf_state:
  + detect start scan session
  + handle adf scan between pages
  + detect end scan session (adf paper empty)
- old code: s->param->adf_pageid hasn't been reset @ adf paper empty
 2014-05-08 19:35:25 +02:00
Rolf Bensch f5d936c655 all ADF scanners support 14" legal paper size 2014-05-08 19:22:01 +02:00
m. allan noah 522f4f4d0f canon_dr backend v46 
- split debug level 30 into two levels
- simplify jpeg ifdefs
- add support for DR-M160
 2014-04-11 21:21:42 -04:00
m. allan noah 0eabc04805 Fix range and value of fujitsu offtimer option 2014-04-11 21:20:30 -04:00
m. allan noah 50236fab4e fujitsu backend v121 
- add JFIF APP0 marker with resolution to jpeg images
- improve jpeg duplex parsing code
- simplify jpeg ifdefs
- add offtimer option for more recent scanners
 2014-04-08 22:11:42 -04:00
m. allan noah 17a6615a11 canon_dr: split debug level 2014-04-08 22:11:42 -04:00
m. allan noah 763e08b4c9 fujitsu backend v120 
- only call hopper_before_op code at batch start
- remove unused backup/restore_params
 2014-03-29 21:18:35 -04:00
m. allan noah ffb7051725 canon_dr backend v45 
- dropout support for machines with ssm2 command
- doublefeed support for machines with ssm2 command
 2014-03-29 21:18:35 -04:00
m. allan noah e20f3b5473 canon_dr backend v44 
- buffermode support for machines with ssm2 command
- DR-M140 needs always_op=0
 2014-03-29 21:18:29 -04:00
m. allan noah 3609f406ca canon_dr backend v43 
- initial DR-M140 support
- add extra_status config and code
- split status code into do_usb_status
- fix copy_line margin offset
- add new color interlacing modes and code
- comment out ssm2
- add timestamp to do_usb_cmd
 2014-03-29 21:17:35 -04:00
Alessandro Zummo b768bb07b6 epson2: fixed another timeout/crash 2014-03-25 14:51:42 +01:00
Rolf Bensch 6ff135ed33 clamp minimum image size to 16 px x 16 px 2014-03-21 19:15:50 +01:00
Rolf Bensch 23b266f92c MX520 has button support 2014-03-21 19:09:33 +01:00
Rolf Bensch e6b3f9ea01 MX520 supports 14" legal paper size in ADF mode 2014-03-21 19:08:21 +01:00
Alessandro Zummo db31fdd1e3 epson2: fixed timeout and scanner crash on WP-4540 series (and others) 2014-03-13 22:57:17 +01:00
Alessandro Zummo 3babe5de40 epson2: fixed ADF detection 2014-03-13 22:56:29 +01:00
Alessandro Zummo 0a37fc99f7 epson2: updated usb ids 2014-03-04 00:57:33 +01:00
Alessandro Zummo f26f3d38a7 epson2: do not reset after each page 2014-03-03 23:56:29 +01:00
Alessandro Zummo e855744b5c epson2: improve debug output 2014-03-03 23:56:28 +01:00
Alessandro Zummo 83b9767539 epson2: fixed detection of multiple network-enabled scanners 2014-03-03 23:56:28 +01:00
Rolf Bensch 5a22adb9ea rename MF4550d to MF4500 Series 2014-02-28 21:19:53 +01:00
Stéphane Voltz a54bbf84f5 fix calibration file name collision 
- handle the case where there are several identical scanners plugged in,
  and avoid sharing the same calibration file
 2014-02-24 06:53:10 +01:00
Louis Lagendijk ff7faa7964 pixma_bjnp.c: remove code and sanei_bjnp_activate/deactivate to make ADF scan work on MFNP protocol 
Code is moved to sanei_bjnp_open/close instead. The FINISH command killed ADF scan
 2014-02-12 00:16:34 +01:00
Louis Lagendijk bd851f2a3e pixma_bjnp.c: fix regression in bjnp support 2014-02-11 21:46:49 +01:00
Louis Lagendijk be2cc19c60 Merge branch 'master' of ssh://git.debian.org/git/sane/sane-backends 2014-02-10 23:56:17 +01:00
Louis Lagendijk 77a1d1cdbc pixma_bjnp.c pixma_bjnp.h pixma_bjnp_private.h: Added support for Canon laser multi-functionals using the mfnp protool over port 8610. 
Improved debug logging to be more reeadable
 2014-02-10 23:53:04 +01:00
Rolf Bensch f0a2800a6d MX510 supports 14" legal paper size in ADF mode 2014-02-08 18:47:52 +01:00
Louis Lagendijk 56b186e225 Increase buffer size, as a device may send a larger blocksize when used over mfnp 2014-02-08 18:01:31 +01:00
m. allan noah 469674c442 umax-uc630 updates from Ondrej Zary 2014-01-29 21:42:46 -05:00
Rolf Bensch 16bbb353cc bug #314411, Canon imageCLASS MF4570dw is working 2014-01-02 20:54:25 +01:00
Rolf Bensch 0efb64d126 update copyright 2014-01-02 20:51:00 +01:00
Rolf Bensch 42d9aa6ec2 MF4800 has ADF 2013-12-27 20:41:54 +01:00
Rolf Bensch 1ffcd34710 Canon i-SENSYS MF4800 Series is working 2013-12-27 11:33:44 +01:00
Rolf Bensch 7c454611a8 MF4800 supports 14" legal paper size in ADF mode 2013-12-27 11:08:03 +01:00
Rolf Bensch 473d976c0f fix usb cmd transaction timeout 2013-12-23 10:02:49 +01:00
Stéphane Voltz a9dc869717 calibration tuning for LiDE35 and LiDE80 2013-12-23 06:20:23 +01:00
Stéphane Voltz f5f88cefde tune gamma for LIDE80 sensor 2013-12-23 06:18:10 +01:00
Stéphane Voltz c5730be96b enable fast fed for LiDE80 2013-12-23 06:18:10 +01:00
Stéphane Voltz e79a94db5e tune LEDADD exposure for GL841 scanners 2013-12-23 06:18:10 +01:00
Stéphane Voltz 60eba116f3 Make LEDADD work for LiDE 35 and 80 2013-12-23 06:18:10 +01:00
m. allan noah 5b66dd64c5 fujitsu backend v119 
- call get_pixelsize after start_scan, not before
- extend get_pixelsize to request backside data
- stop using backup/restore_params
- don't use extended get_pixelsize on M3091 or M3092
- call software crop code on backside images too
 2013-12-18 21:53:26 -05:00
Rolf Bensch 5cfa697ec3 Pixma backend version 0.17.6 2013-12-16 19:41:20 +01:00
Rolf Bensch de393271bc tidy calc_shifting() 2013-12-16 19:27:02 +01:00
Rolf Bensch 0893dc530f enable button support for MX920 2013-12-16 19:24:25 +01:00
Rolf Bensch 94378b7bd8 bypass reorder_pixels() 2013-12-16 19:21:14 +01:00
Rolf Bensch 0670ad7b12 MX920 has 14" ADF paper length 2013-12-16 19:17:57 +01:00
Rolf Bensch 2f37052d2a rename Canon imageCLASS MF4770n to i-SENSYS MF4700 Series 2013-12-16 18:31:43 +01:00
Rolf Bensch a1222c0928 rename Canon i-SENSYS MF4890dw to MF4800 Series 2013-12-16 18:31:21 +01:00
Stéphane Voltz 6e1ce492ba GL841 shading calibration fixes 
- fix regression in LiDE 35 shading (buffer full flag)
- tune LiDE80 shading calibration by skipping extra dark area
- whitespaces cleanup
 2013-12-16 06:06:19 +01:00
Stéphane Voltz b882b2ed06 use y white strip offset to reach calibration area 
- use y white strip offset to move to calibration area for GL841 devices
- set y offset to 0 for all GL841 devices but one needing it
 2013-12-15 07:27:26 +01:00
Stéphane Voltz 77a3c2f7aa disable LED ADD for LiDE 80 2013-12-15 07:27:26 +01:00
Stéphane Voltz 4cae3bdeab LIDE80 WIP : basic operation milestone reached! 
- make SHDAREA work
- exposure timing working from 75 to 1200 dpi
 2013-12-15 07:27:26 +01:00
Stéphane Voltz 1a780d6bf1 LiD80 WIP: working motor modes for all resolution 2013-12-15 07:27:25 +01:00
Stéphane Voltz 091322f1f6 LiDE80 WIP : 1200 dpi color mode working 
- factor exposure computing for gl841
- correct motor set up for LiDE80
 2013-12-15 07:27:25 +01:00
Stéphane Voltz 79371ea4d9 factor out step type computing function 2013-12-15 07:27:25 +01:00
Stéphane Voltz e500d44e65 LiDE 80 WIP: 
- 1200 shading working
- 600 and below resolution are ok, but shading needs to be fixed
- 1200 dpi motor resolution doesn't work
 2013-12-15 07:27:25 +01:00
Stéphane Voltz ebcc2c0a3f LiDE80 WIP : update calibration 
- led calibration updated
- offset calibration : new function added
- coarse gain calibration updated
- device description updated
 2013-12-15 07:27:25 +01:00
Stéphane Voltz 1952f1172a LiDE 80 WIP : unit test scans are working 2013-12-15 07:27:25 +01:00
Stéphane Voltz 8fbb9c247b LiDE 80 WIP : working unit esting for 75, 100, 150 and 300 dpi 2013-12-15 07:27:25 +01:00
Stéphane Voltz 6ebd7e35b4 LiDE80 WIP : Working frontend 2013-12-15 07:27:25 +01:00
m. allan noah 9f6ebc2f3c fujitsu backend v118 
- support fi-7160, fi-7260, fi-7180 and fi-7280
- remove unused var from do_scsi_cmd()
- added more request_sense options
- add adv_paper_protect option
- enable paper protection by default
- increase max_x_fb for fi-6240 and fi-6230
 2013-12-10 21:57:11 -05:00
m. allan noah c4a5bbc143 canon_dr backend v42 
- initial DR-G1100 support
- add support for paper sensors (P-215 & P-208)
- add initial support for card reader (P-215)
- removed unused var from do_scsi_cmd()
 2013-12-09 20:56:45 -05:00
Nils Philippsen d835d9d565 epson: don't leak memory if realloc() fails 2013-11-07 14:29:28 +01:00
Nils Philippsen dc76e7cce4 genesys: check return values 2013-11-06 12:03:23 +01:00
Nils Philippsen 5d7f7ffefb genesys: remove code which is never reached 
The surrounding conditions always evaluate as FALSE because the
variables are set to different values before.
 2013-11-06 12:03:23 +01:00
Nils Philippsen 602d6ecdfe rts8891: check return values 2013-11-06 12:03:23 +01:00
Nils Philippsen a3fe2c1ea5 genesys: compute MAX_SCANNERS from array length 
... of genesys_usb_device_list[]
 2013-11-05 15:51:05 +01:00
Nils Philippsen 2d89e37f36 kodakio: don't overrun option name array 2013-11-05 15:51:05 +01:00
Nils Philippsen 101f76c516 pixma: document falling through to next switch case 2013-11-05 15:19:48 +01:00
Nils Philippsen b53a58c4b5 genesys: avoid infinite loop 
The stray semicolon prevents executing the loop which could reset the
REG41_FEBUSY bit.
 2013-11-05 15:15:17 +01:00
Nils Philippsen 575f40a079 pixma: avoid buffer overflows 2013-11-05 15:12:20 +01:00
Nils Philippsen cf9129d62f pixma: u32tohex(): shift first, then cast to uint8_t 2013-11-05 14:54:13 +01:00
Nils Philippsen 66cb9b55c2 remove code which is never reached 2013-11-05 14:47:27 +01:00
Nils Philippsen 252ccdd926 genesys: fix some memory leaks 2013-11-05 14:17:12 +01:00
Nils Philippsen 8cd2d36f1e epson: ensure that command() allocates enough memory 2013-11-05 14:05:25 +01:00
Nils Philippsen 56104b5329 genesys: avoid dereferencing null pointer 2013-11-05 11:39:56 +01:00
Nils Philippsen d35d6326cb pixmap: omitting curly braces considered harmful 
The break being outside of the else block effectively made an if clause
out of the while loop. This caused long hostnames to not be shortened
sufficiently which subsequentely made strcpy() write beyond buffer
boundaries.
 2013-10-29 14:14:18 +01:00
Stéphane Voltz 4b6d50f662 LiDE 80 WIP : parking is now working 2013-10-19 21:30:04 +02:00
Stéphane Voltz eca8b300b5 LiDE 80 init working 2013-10-19 21:24:34 +02:00
Stéphane Voltz c88b3bc228 add LiDE 80 device description 2013-10-19 21:24:34 +02:00
Paul Newall 37523b867d Bugfix in kodakaio.c to fix segfault when non kodak scanners return unexpected data via avahi auto discovery 2013-10-14 22:22:53 +01:00
Rolf Bensch 70cfb5e71b Pixma backend version 0.17.5 2013-10-11 19:43:27 +02:00
Rolf Bensch ee4704f34a new scanner Canon i-SENSYS MF4890dw 2013-10-11 19:40:42 +02:00
Rolf Bensch 82f92ec004 use mf->generation instead of s->cfg->pid for generation 2 scanners 2013-10-11 19:29:58 +02:00
Rolf Bensch d5baddf003 reorder scanner defines 2013-10-11 19:20:13 +02:00
Rolf Bensch e95e888c3b fix button support for Canon CS8800F 2013-09-30 16:22:12 +02:00
Rolf Bensch a178841287 new scanner Canon imageCLASS MF4770n 2013-09-24 21:25:19 +02:00
Alex Belkin b5ca4318c3 usb id for dell 1235cn, reported by Jean-Francois Labrousse. 2013-09-18 22:52:34 +04:00
m. allan noah dbbcb61f09 microtek.c: add missing break (#314408) 2013-09-17 21:34:25 -04:00
Gerhard Jaeger b5d1459dfd Tweaked motor settings for CanoScan N650U 2013-09-16 17:16:23 +02:00
Gerhard Jaeger b77df93a26 Bumped build number 2013-09-16 17:15:39 +02:00
Rolf Bensch a8461cbe7a new scanners Canon imageCLASS MF4570dw and imageRUNNER 1133 2013-09-13 14:06:38 +02:00
Rolf Bensch c04b748b21 Pixma backend version 0.17.4 2013-09-11 22:56:18 +02:00
Rolf Bensch dbfcd4dbcf new scanners Canon Pixma MG2400, MG2500, MG3500, MG5500, MG64000, MG6500 and MG7100 2013-09-11 22:53:37 +02:00
Dan Kegel 0f23fb3fc1 Epson Perfection 1650 doesn't support the FSG_STATUS_CANCEL_REQ bit. Fixes sane bug 312793/ debian bug 597922. 2013-09-02 12:08:49 +02:00
Alessandro Zummo 543393d90c close connection if an error occurs in the detection process 2013-08-29 11:33:24 +02:00
Chris Bagwell bc2dc68fa5 Improve snmp detection when cross compiling. 
Improving here means do not set LIBS/CFLAGS if library is not detected.
This prevents some unknown options based to ld when host is Linux and
target is mingw32/64.  Further improvements are needed if one wants this
snmp support when cross compiling to really work.

Also, to make commit bisectable, updated all autofoo files using
'autoreconf -i -f' and repatching ltmain.sh.

Also, test-driver was missing from git repo but the Makefile.in
checked in expected it to exist.
 2013-08-15 13:10:39 -05:00
Stéphane Voltz e3e5e9b3a3 implement brightness/constrast enhancement using gamma tables 2013-08-11 21:51:26 +02:00
Stéphane Voltz 63d12e3ee9 add calibration file name option 
- add an option to set calibration cache file name
- update man page and fr translation
 2013-08-07 06:42:14 +02:00
Stéphane Voltz ff58b225bf add digital contrast and brightness 2013-08-05 21:28:39 +02:00
m. allan noah 4029979bd9 Add changelog entry and correct date for v41 2013-07-31 21:43:09 -04:00
m. allan noah eacdc3a5b3 canon_dr backend version 41 
- initial P-208 and P-215 support
- bug fix for calibration of scanners with duplex_offset
- allow duplex_offset to be controlled from config file
 2013-07-31 21:38:25 -04:00
Stéphane Voltz bf1f8988a1 fix incorrect cap for SWDEROTATE option (bug #314339) 2013-07-30 14:19:18 +02:00
Rolf Bensch 3578d4039e Canon Pixma MX920 has duplex ADF and supports max. 600 dpi @ ADF 2013-07-19 20:59:43 +02:00
Rolf Bensch 22ead4021c Pixma backend version 0.17.3 2013-07-18 22:54:37 +02:00
Rolf Bensch 11ba184235 new button option --scan-resolution 
detailed button option description
 2013-07-18 22:45:45 +02:00
Rolf Bensch ded994f348 Canon PIXMA MG8200 is working now 2013-07-18 22:24:39 +02:00
Stéphane Voltz 70bb3e2c60 some whitespaces clean up 2013-07-18 08:18:26 +02:00
Stéphane Voltz 1fa067861c update lide 110 to match scan lide 210 
- use lide 210 mode for lide 110
- prepare true gray for GL124
 2013-07-17 22:47:42 +02:00
Stéphane Voltz c9a4cbe7a1 improve linesel computing 2013-07-17 21:49:12 +02:00
Stéphane Voltz 1c3ec28ab8 improve below 600 dpi scan speed and quality for lide 210 
- add half ccd mode for lide 210
 2013-07-17 21:24:57 +02:00
Stéphane Voltz ca08a8ba2b switch genesys register address to 16 bits 2013-07-15 07:53:37 +02:00
Stéphane Voltz 5408c8cd27 use LINESEL in all cases fro GL124 2013-07-09 06:59:56 +02:00
Stéphane Voltz 730a2ba4e5 define specific LIDE210 sensor and motor instead of using LIDE110 ones 2013-07-04 04:28:09 +02:00
Stéphane Voltz 2812e1f81a add missing cases for CCD_PLUSTEK3800 2013-07-04 04:08:16 +02:00
Rolf Bensch 1c5760a897 fix mode list for infrared scans 2013-06-27 21:14:49 +02:00
m. allan noah b8cc128ea9 Fujitsu backend v117 
default buffer-mode to off
improved error handling in sane_start
image width must be multiple of 8 when swcrop is used before binarization (iX500)
check hopper sensor before calling object_position(load) on iX500
 2013-06-27 09:47:12 -04:00
Stéphane Voltz 2d7ebd42ea experimental code for GL845 based Opticbook 3800 
- add GL845 ASIC which is almost identical to the GL846
- add Opticbook 3800 to genesys backend
 2013-06-26 06:51:55 +02:00
Alex Belkin 2f02a7e6b8 One more Samsung (C460) USB id. 2013-06-25 17:51:39 +04:00
Alex Belkin 547e8ba068 Added multiple Samsung USB IDs as reported by Mikhail Elhimov. 2013-06-22 00:32:16 +04:00
Stéphane Voltz b98f24990f add cap to SENSOR and BUTTON group 2013-06-18 21:08:00 +02:00
Rolf Bensch ec0344af85 fix test mode 2013-06-15 22:27:07 +02:00
Rolf Bensch 51028a2c0e disable TPU negatives scan 
negatives scan has no benefit
disabling avoids confusion
 2013-06-10 21:32:31 +02:00
Rolf Bensch acb4c5b2b5 new scanner Canon CanoScan 9000F Mark II 2013-06-10 21:23:19 +02:00
Stéphane Voltz 9a8b640d8d bug 314293 fix 
- don't use non-existent end of records
 2013-06-03 06:33:08 +02:00
Stéphane Voltz 40b5d75aa3 fix bug #314261 2013-05-27 10:41:32 +02:00
Jonathan Bravo Lopez 09666ae089 * backend/hp3900_rts8822.c: fix compilation warnings. 2013-05-11 01:36:03 +02:00
Rolf Bensch 50df7af5cc update copyright 2013-04-26 22:52:44 +02:00
Rolf Bensch 3ca8dbc460 new scanners Canon Pixma E510 and E610 
all scanners need further testing
 2013-04-24 11:25:53 +02:00
Rolf Bensch 75c32c0de8 new scanner Canon Pixma MX720 
this scanner needs further testing
 2013-04-24 10:02:15 +02:00
Rolf Bensch 5f1da65108 new scanner Canon i-SENSYS MF3010 2013-04-19 23:12:52 +02:00
Rolf Bensch db8a565bc1 new scanners Canon Pixma MG2200, MG3200, MG5400, MX390, MX450, MX520 and MX920 
all scanners need further testing
 2013-04-11 22:05:09 +02:00
m. allan noah 9fc683d883 fujitsu backend v116 
add swskip option
add sanei_magic_isBlank2
 2013-04-03 21:54:48 -04:00
m. allan noah 120e303732 fujitsu: call set_mode() in init_interlace 2013-04-03 21:54:48 -04:00
Stéphane Voltz e6f23f201d fix hotplug detection of devices for lexmark backend 
- create a probe_lexmar_devices() and call it from sane_init
- call probe_lexmar_devices() from sane_get_devices to update device list
- use sanei_usb_exit() and sanei_usb_find_devices()
 2013-04-02 21:05:02 +02:00
Stéphane Voltz a056cb238e handle scanner unplugging detection 2013-03-29 22:02:50 +01:00
Stéphane Voltz e0e19b413e handle scanner hot-plug in sane_get_devices 
- rescan usb bus
- rescan for new devices
 2013-03-29 21:54:46 +01:00
Stéphane Voltz 2190d18a63 move device detection in a dedicated function 
- create a probe_gt68xx_devices() function that ssearch and attach
  matching scanners
 2013-03-29 21:54:32 +01:00
Stéphane Voltz c025a47671 fix compile warning 2013-03-29 21:53:16 +01:00
Stéphane Voltz 6a8469dd13 use sanei_usb_exit() 2013-03-29 21:53:05 +01:00
Stéphane Voltz 010f34710e option correctness fixes 
- fix wrong cap due to wrong addressing
- ensure correctness of group options
 2013-03-27 06:31:49 +01:00
Stéphane Voltz 1656585499 warning fixes 
- unused parameters
- wrong printf fromat
- assigned to self
 2013-03-27 06:28:11 +01:00
Rolf Bensch 7fd2286414 fix button support 2013-03-25 10:30:59 +01:00
Stéphane Voltz 7070fac113 convert genesys backend to use new sanei_usb functions 
- call sanei_usb_scan_devices() in sane_get_devices to rescan bus to refresh
  USB scanner list
- call sanei_usb_exit() in sane_exit to free allocated resources
 2013-03-24 14:20:06 +01:00
Rolf Bensch 1ef0342aa1 new scanner Canon Pixma MP230 2013-03-21 19:10:03 +01:00
Stéphane Voltz 5e93524960 bug 314038 use after free 
- apply patch from Nickolai Zeldovich (nickolai-guest) to
  fix use after free errors
 2013-03-18 11:56:33 +01:00