canon_dr backend v49

initial support for DR-C125 and possibly DR-C225

backend/canon_dr.c

@@ -309,6 +309,8 @@
          - set another unknown byte in buffermode for ssm2
          - add another gettimeofday call at end of do_usb_cmd
          - don't print 0 length line in hexdump
+      v49 2015-03-18, MAN
+         - initial support for DR-C125
 
    SANE FLOW DIAGRAM
 
@@ -358,7 +360,7 @@
 #include "canon_dr.h"
 
 #define DEBUG 1
-#define BUILD 48
+#define BUILD 49
 
 /* values for SANE_DEBUG_CANON_DR env var:
  - errors           5
@@ -1542,6 +1544,38 @@ init_model (struct scanner *s)
     s->can_monochrome=0;
   }
 
+  else if (strstr (s->model_name,"DR-C125")
+   || strstr (s->model_name,"DR-C225")
+  ){
+
+    /*confirmed settings*/
+    s->gray_interlace[SIDE_FRONT] = GRAY_INTERLACE_2510;
+    s->gray_interlace[SIDE_BACK] = GRAY_INTERLACE_2510;
+    s->color_interlace[SIDE_FRONT] = COLOR_INTERLACE_2510;
+    s->color_interlace[SIDE_BACK] = COLOR_INTERLACE_2510;
+    s->duplex_interlace = DUPLEX_INTERLACE_2510;
+    s->unknown_byte2 = 0x88;
+    s->need_ccal = 1;
+    s->ccal_version = 3;
+    s->need_fcal = 1;
+    s->invert_tly = 1;
+    s->can_color = 1;
+    s->rgb_format = 1;
+    /*s->duplex_offset = 400; now set in config file*/
+
+    /*only in Y direction, so we trash them in X*/
+    s->std_res_x[DPI_100]=0;
+    s->std_res_x[DPI_150]=0;
+    s->std_res_x[DPI_200]=0;
+    s->std_res_x[DPI_240]=0;
+    s->std_res_x[DPI_400]=0;
+
+    /*suspected settings*/
+    s->always_op = 0;
+    s->fixed_width = 1;
+    s->valid_x = 8.5 * 1200;
+  }
+
   DBG (10, "init_model: finish\n");
 
   return SANE_STATUS_GOOD;

backend/canon_dr.conf.in

@@ -150,6 +150,7 @@ option duplex-offset 400
 usb 0x1083 0x163f
 
 # DR-C125
+option duplex-offset 400
 usb 0x1083 0x1640
 
 # DR-P215

doc/descriptions/canon_dr.desc

@@ -11,7 +11,7 @@
 
 :backend "canon_dr"              ; name of backend
 :url "http://www.thebility.com/canon/" 
-:version "47"                    ; version of backend
+:version "49"                    ; version of backend
 :manpage "sane-canon_dr"         ; name of manpage (if it exists)
 :comment "Backend updated for SANE release 1.0.25, see sane-canon_dr manpage"
 :devicetype :scanner             ; start of a list of devices....
@@ -273,8 +273,7 @@
 :model "DR-C125"
 :interface "USB"
 :usbid "0x1083" "0x1640"
-:status :untested
-:comment "Similar protocol to other canon_dr machines, but unsupported image format."
+:status :good
 
 :model "DR-C130"
 :interface "USB"
@@ -285,6 +284,7 @@
 :interface "USB"
 :usbid "0x1083" "0x1658"
 :status :untested
+:comment "Perhaps similar to DR-C125?"
 
 :model "DR-F120"
 :interface "USB"