The previous approach was to allocate an array on the stack, and
have the array extend past the stack size. This worked by would
result in SP being moved near the end of the stack. If an interrupt
triggered at that time, interrupt prologue would try to save the
context to the stack, tripping the stack overflow watchpoint.
Replacing this with the approach which doesn't move the SP and simply
writes to decreasing addresses from SP, until stack overflow check
triggers.
riscv32-esp-elf toolchain (used for ESP32-C3) can also be used for
ESP32-S2 RISC-V ULP coprocessor.
This removes the riscv-none-embed-gcc toolchain which was originally
used for the ULP, and updates the docs and CMake files to use
riscv32-esp-elf.
Some flags are cleaned up and workarounds removed from CMake toolchain
file.
Updated:
- CSV eFuse table
- Kconfig
- efuse_table_gen.py
- UTs
- espefuse.py
efuse/c3: Fix the burn order of BLOCKs (MAX->0)
efuse/c3: Support efuse API with keys, protection, purpose bits
tool/ci: Adds test_efuse_table_on_host for esp32s3 and esp32c3
This follows a similar approach as UART core dump handling in
idf_monitor. Panic handler message is detected in the output,
collected into a file, and the file is passed to the decoding script.
In this case, the decoding script acts as a tiny GDB server, so we
can ask GDB to perform the backtrace.
There is no ccomp timer on C3, which means our performance tests will start
failing again due to variance caused by cache misses.
This MR adds TEST_PERFORMANCE_CCOMP_ macro that will only fail
performance test if CCOMP timer is supported on the target
`UnitTestParser.py` will strip unit case config name when generate test
ID. But in `unit_test.py` we didn't do this. It makes the test ID in 2
stages are different. Now we will add this step to `unit_test.py`.
Currently IDF_VERSION_* variables are not available to the component
CMakeLists.txt files at the requirements expansion stage. This makes
it harder to write component CMakeLists files compatible with
different IDF versions.
Include version.cmake from the requirements expansion script, add a
build system test.
The following three headers will be mockes:
* esp_flash.h
* esp_spi_flash.h
* esp_partition.h
* counter functions live in own header
* add spi_flash sim dir for esp_err.h to Unity
* modified gen_esp_err_to_name.py to ignore
sim/ dir in spi_flash component
Add cmock .yaml config file
Add spi hal header until soc can mock the hal
layer as well.
* add toolchain file
* add linux to preview targets
* add stub for dfu number in cmake
* excluded unity runner per default
* Added esp_attr.h and esp_partition.h linux stubs
* component.cmake check list for emptyness
* added switch for linux in unity cmake file
* Added Linux host example app
Marius Vikhammer