mirror
/
Hamlib
kopia lustrzana https://github.com/Hamlib/Hamlib
1
0
Forkuj 0
Kod Zgłoszenia Projekty Wydania Wiki Aktywność
7 480 Commity
54 Gałęzie
29 Tagi
44 MiB
Wykres commitów

7480 Commity (dbdf86fa9a629c83354e2a9894342b1522300bbb)

Autor SHA1 Wiadomość Data
root dbdf86fa9a Fix testcache.c to avoid modifying constant 2021-07-14 23:22:46 -04:00
root dd376a1267 Fix c++ compile for compilers that need the -std=c++11 switch 
https://github.com/Hamlib/Hamlib/issues/740
 2021-07-14 23:21:32 -04:00
Mike Black W9MDB 2c57bc51d5 Reduce unnecessary warning messages in rig.c 2021-07-13 15:49:15 -05:00
Mike Black W9MDB 0fecf4f587 Update version and status for rs_hfiq.c 2021-07-12 23:50:28 -05:00
Michael Black b7f4722603
Merge pull request #739 from cjritola/fixesJuly2021 
Use loop to ensure RS-HFIQ hears first command. Closes #738
 2021-07-12 23:31:21 -05:00
Chuck Ritola d5231ec0da Use loop to ensure RS-HFIQ hears first command. Closes #730 2021-07-13 00:07:23 -04:00
Mike Black W9MDB 28c8b5a502 Increase timeout in netrigctl.c to 10000 to allow for worst case rig 
Most rigs will have their timeout set to the rig's timeout plus 500ms.
 2021-07-12 11:22:26 -05:00
Mike Black W9MDB 91b3d26837 For all rigs avoid setting mode while PTT is on 
https://github.com/Hamlib/Hamlib/issues/737
 2021-07-12 08:57:02 -05:00
Mike Black W9MDB 4f500ae8e8 Back out change to register.c 2021-07-09 06:46:38 -05:00
Mike Black W9MDB 6bdb82bc54 Fix some vfo swapping issues for Icom rigs 
https://github.com/Hamlib/Hamlib/issues/734
 2021-07-08 13:14:42 -05:00
Mike Black W9MDB b83b8aba60 register.c now correctly burps when bad model# is used 
https://github.com/Hamlib/Hamlib/issues/735
 2021-07-08 12:50:28 -05:00
Mike Black W9MDB 53adea283c Fix regsiter.c so c++ make check works 
Another solution to this needed
https://github.com/Hamlib/Hamlib/issues/735
 2021-07-08 11:56:10 -05:00
Mike Black W9MDB cc089335b0 Adjust RIG_BACKEND_NUM in register.c so it can detect bad rig numbers 
https://github.com/Hamlib/Hamlib/issues/735
 2021-07-08 11:26:11 -05:00
Mike Black W9MDB 65c77953f8 Add MainA/B SubA/B to icom.c 
https://github.com/Hamlib/Hamlib/issues/730
 2021-07-05 17:04:24 -05:00
Mike Black W9MDB 21ade6493a Add MainA/B and SubA/B to dummy rig for testing 
Add debug cache display for same when applicable
https://github.com/Hamlib/Hamlib/issues/730
 2021-07-05 11:24:07 -05:00
Mike Black W9MDB dd0187ede6 Fix Icom rig 0x25 command for set mode with data and no width change 
Fix Icom rigs not working with rigtctld and 0x25 command
https://github.com/Hamlib/Hamlib/issues/733
 2021-07-03 22:16:33 -05:00
Mike Black W9MDB 716fbb7643 Fix MAIN_B pointing to priv->vfo_mainb in dummy.c 2021-07-02 16:23:30 -05:00
Mike Black W9MDB 4e0107e988 Make 100Hz freq truncation work on 32-bit compilers in dummy.c 2021-07-01 07:22:02 -05:00
Mike Black W9MDB 76527afba5 Block 100Hz resolution logic from dummy.c 2021-06-30 13:01:45 -05:00
Mike Black W9MDB 466afd5d3f Fix WSJTX rig split behavior with rigctld -- was setting VFOA to VFOB freq 
https://github.com/Hamlib/Hamlib/issues/721
 2021-06-28 22:27:26 -05:00
Mike Black W9MDB 75687ea273 Show startup arguments for rigctl and rigctld 2021-06-28 10:11:29 -05:00
Mike Black W9MDB 185d182a42 Add RIG_TARGETABLE_MODE to FT991 
Will allow proper split ops to set mode on VFOB
https://github.com/Hamlib/Hamlib/issues/731
 2021-06-28 08:44:11 -05:00
Mike Black W9MDB 1f91bdb7a6 Fix compile warnings in testrig.c 2021-06-25 07:31:15 -05:00
Mike Black W9MDB 217a978ab9 Fix split control for K3 and probably other rigs too 
https://github.com/Hamlib/Hamlib/issues/728
 2021-06-24 23:41:50 -05:00
Mike Black W9MDB ca7ca873bc Add TARGETABLE_MODE to k3.c 
https://github.com/Hamlib/Hamlib/issues/728
 2021-06-24 17:48:30 -05:00
Mike Black W9MDB b340d594f0 Re-enable rig_flush due to command stacking occurring on K3 (and probably others) 
https://github.com/Hamlib/Hamlib/issues/728
 2021-06-22 10:53:28 -05:00
Mike Black W9MDB dd2ed945fd Change default multicast to 0.0.0.0 for now until implemented and tested 
https://github.com/Hamlib/Hamlib/issues/695
 2021-06-21 16:52:27 -05:00
Mike Black W9MDB 72da9f645c Fix ptt settings using rigctld -P 
https://github.com/Hamlib/Hamlib/issues/727
 2021-06-21 16:48:06 -05:00
Mike Black W9MDB eaff946c26 In prm80 move misc.h include in prm80.c to prm80.h 
Should fix compilation problem on Open BSD 6.9
 2021-06-20 07:30:24 -05:00
Mike Black W9MDB c8439de131 Reverse K3 PKTLSB/PKTUSB sensing 
Was causing WSJTX to get a PKTLSB response after sending PKTUSB
These rigs now only set MD when MD needs changing which speeds up the polling cycle
https://github.com/Hamlib/Hamlib/issues/726
 2021-06-18 22:58:49 -05:00
Mike Black W9MDB b80ff9330c Add debug to k3.c to chase down mode setting problem 
https://github.com/Hamlib/Hamlib/issues/726
 2021-06-18 10:35:27 -05:00
Mike Black W9MDB beede15b7b Change debug a bit in rig.c 2021-06-16 10:35:38 -05:00
Mike Black W9MDB b7e77aa83f Merge branch 'master' of https://github.com/Hamlib/Hamlib 2021-06-16 10:14:42 -05:00
Mike Black W9MDB c72517eafa Move loop declaration outside the for statement in rig.c 
Also got rigctld working with WSJTX -- but not JTDX yet
https://github.com/Hamlib/Hamlib/issues/721
 2021-06-16 10:13:45 -05:00
Mike Black W9MDB 2a8ca81848 Move loop declaration outside the for statement in rig.c 2021-06-16 10:11:45 -05:00
Mike Black W9MDB 3b2715463d Change kenwood_set_mode to only change mode if necessary by reading it first 
https://github.com/Hamlib/Hamlib/issues/726
 2021-06-15 22:35:05 -05:00
Mike Black W9MDB 763e18fa42 Fix get_mode_with_data for IC7800 as it can set but not read mode with 0x26 command 
https://github.com/Hamlib/Hamlib/issues/725
 2021-06-14 07:52:29 -05:00
Mike Black W9MDB 42a9d4fbd6 Fix netrigctl vfo where non vfo mode VFOB was not working 
https://github.com/Hamlib/Hamlib/issues/721
 2021-06-13 22:53:18 -05:00
Mike Black W9MDB ed09f54483 Fix dummy rig current_vfo where non vfo mode VFOB was not working 
https://github.com/Hamlib/Hamlib/issues/721
 2021-06-13 22:51:55 -05:00
Mike Black W9MDB 7b1ad09aed Fix retcode compilation warning 2021-06-13 16:18:46 -05:00
Mike Black W9MDB 9ff92fa5ec Add VFO_B as valid VFO for trxmanager set_split_freq_mode 
https://github.com/Hamlib/Hamlib/issues/724
 2021-06-13 16:06:40 -05:00
Mike Black W9MDB 6dacfa53c0 Avoid nested calls in rigctld 
https://github.com/Hamlib/Hamlib/issues/721
 2021-06-12 11:04:10 -05:00
Mike Black W9MDB c7b10e0e8f Change K3 rigs to query MD and not set if not a change 
K3S was taking 400ms to do MD6; when already in MD6; so query is a lot faster
Will also avoid trying to set mode when PTT is on
https://github.com/Hamlib/Hamlib/issues/722
 2021-06-12 10:25:02 -05:00
Mike Black W9MDB 37b16fa283 Improved FLRig error message when requesting a mode that FLRig does not have 2021-06-07 09:32:57 -05:00
Mike Black W9MDB e427262a89 Promote thd74 to stable 2021-06-06 23:02:55 -05:00
Mike Black W9MDB fcb2529ed0 Have thd74.c call kenwood_open 
https://github.com/Hamlib/Hamlib/issues/718
 2021-06-06 07:57:33 -05:00
Mike Black W9MDB 976ba6df02 Add small delay in flex6xxx.c after ptt off -- seems to take a short while to really do it for the ANAN rigs 2021-06-05 22:23:57 -05:00
Mike Black W9MDB 540ca9cce3 Remove empty cmd from thd74.c and bump up to beta 
https://github.com/Hamlib/Hamlib/issues/718
 2021-06-05 16:54:53 -05:00
Michael Black 9d7e1651b2
Merge pull request #719 from mikaelnousiainen/add-spectrum-data-for-dummy-rig 
Add spectrum scope caps for dummy rig
 2021-06-05 14:21:40 -05:00
Mikael Nousiainen 840333266f Add spectrum scope caps for dummy rig. Fix duplicate definition for IC-785x. 2021-06-05 21:48:10 +03:00