sp9unb
/
meshtastic-firmware
sforkowany z mirror/meshtastic-firmware
1
0
Forkuj 0
Kod Zgłoszenia Oczekujące zmiany Packages Projekty Wydania Wiki Aktywność
1 470 Commity
8 Gałęzie
195 Tagi
44 MiB
Wykres commitów

42 Commity (95cb6b06e445e17378fd339e1e1fd3e7fdaa976e)

Autor SHA1 Wiadomość Data
geeksville 124a82888d add power testing notes for eink 2020-09-28 17:38:36 -07:00
geeksville fec7a6bf17 add air530 gps sleep support 2020-09-28 17:04:19 -07:00
geeksville bc50b39a3b put eink screen to sleep to save power 2020-09-28 16:08:52 -07:00
geeksville 116fe6d109 eink bootloader finished 2020-09-28 15:18:32 -07:00
geeksville 6a4ef7e1d1 eink board serial flash seems to work 2020-09-28 14:10:33 -07:00
geeksville a0fd83428f eink use RESET button as regular button instead 2020-09-28 13:10:27 -07:00
geeksville e5d4fbb164 fix pins per email eink 2020-09-28 13:03:54 -07:00
geeksville 28ec0e310d make bat voltage sensing work on eink 2020-09-26 18:13:16 -07:00
geeksville 266ba03bb7 route debug output back to the CDC-ACM device instead of JLINK 2020-09-26 13:49:22 -07:00
geeksville db33200468 remove more stale eink code 2020-09-26 12:51:05 -07:00
geeksville d7fbcf89bf cleanup todo eink now ready to merge 2020-09-26 12:36:11 -07:00
geeksville a8b1bc735a remove debugging code eink gps now works 2020-09-26 12:12:50 -07:00
geeksville ba8c640d6e eink leds kinda work now 2020-09-26 10:53:02 -07:00
geeksville d88d2780f4 eink display now kinda works 2020-09-26 09:40:48 -07:00
geeksville b0bbf95b03 LORA now works on the eink board (new schematic from ttgo) 2020-09-26 07:25:32 -07:00
geeksville 772d045166 more eink notes 2020-09-25 10:41:27 -07:00
geeksville 6f77244af3 eink wip notes 2020-09-25 09:14:00 -07:00
geeksville a79aff4778 WIP - I think some pins are wrong, waiting for new schematic 2020-09-24 16:36:07 -07:00
geeksville 5fbeaee0b0 eink kinda builds 2020-09-24 14:36:43 -07:00
geeksville f1ca1ee3c0 okay basic support for @bigcorvus board is done 2020-08-29 12:46:42 -07:00
geeksville dffb6c2f06 If display is on on the @BigCorvus board and we xmit the board browns out? 2020-08-28 17:38:23 -07:00
geeksville 7f214ffbb0 TFT kinda correct now - but slow because of bit banging 2020-08-28 15:33:33 -07:00
geeksville d91ab5480f begin support for TFT displays 2020-08-17 13:47:05 -07:00
geeksville 781077e799 Turn on buck converter for @BigCorvus board, now radio works 2020-08-17 11:42:19 -07:00
geeksville 22946b5e51 @BigCorvus board now kinda boots 
###RTT Client: -----------------------------------------------
###RTT Client: Connecting to J-Link RTT Server via localhost:19021 ...
###RTT Client: Connected.

SEGGER J-Link V6.70c - Real time terminal output
SEGGER J-Link ARM V9.6, SN=69663845
Process: JLinkGDBServerCLExe
Emitting reboot packet for serial shell
I2C device found at address 0x55
done
Meshtastic swver=unset, hwver=unset
Reset reason: 0x0
FIXME, call randomSeed
ERROR: No UBLOX GPS found
Hoping that NEMA might work
RadioConfig reset!
Initial packet id 1481765933, numPacketId 4294967295
No saved preferences found
NODENUM=0xB18C3A4E, dbsize=1
Starting meshradio init...
Set radio: name=Default, config=3, ch=6, power=17
SX1262 init result 0
sending owner !df5db18c3a4e/Unknown 3a4e/?4E
Update DB node 0xB18C3A4E, rx_time=0
old user !df5db18c3a4e/Unknown 3a4e/?4E
updating changed=0 user !df5db18c3a4e/Unknown 3a4e/?4E
Adding packet record (id=0x5851F430 Fr0x4E To0xFF, WantAck0, HopLim3 Payload:User)
enqueuing for send (id=0x5851F430 Fr0x4E To0xFF, WantAck0, HopLim3 encrypted)
txGood=0,rxGood=0,rxBad=0
Starting low level send (id=0x5851F430 Fr0x4E To0xFF, WantAck0, HopLim3 encrypted)
assert failed src/mesh/SX1262Interface.cpp: 102, virtual void SX1262Interface::setStandby(), test=err == ERR_NONE
 2020-08-17 11:29:00 -07:00
geeksville 6b568ab2fb add powerhold for @bigcorvus board 2020-08-16 14:50:04 -07:00
geeksville 67bad9a689 Add SX1262 to @BigCorvus board 2020-08-16 14:20:05 -07:00
geeksville 559a790286 Add @BigCorvus board support to build 2020-08-16 14:08:31 -07:00
geeksville 08e5bd728b lorarelay wip 2020-08-16 14:07:01 -07:00
geeksville 0cfeeba2e2 add variant files by @BigCorvus 2020-08-16 13:25:24 -07:00
geeksville cb1053850d Oops - I mismerged at somepoint, restore correct PPR variant.h defs 2020-08-03 11:05:24 -07:00
geeksville acbe8c159b move rak815 variant to arduino repo 2020-07-10 12:38:11 -07:00
geeksville 5b07d454b1 WIP RAK815 now builds correctly 2020-07-10 11:29:32 -07:00
geeksville b00a936f41 WIP RAK815 support 2020-07-10 11:02:29 -07:00
geeksville 477c62082d E22 SX1262 module now works! 
Thanks mostly to an old github comment by @beegee-tokyo the fix was easy
(comment here https://github.com/jgromes/RadioLib/issues/12#issuecomment-520450429)

We now set DIO3 to 2.4 volts to power the oscillator inside the E22
module (undocumented in the E22 docs)
 2020-06-15 14:38:09 -07:00
geeksville 4b5cfaf9ba changes from bringing up PPR 2020-06-05 11:00:18 -07:00
geeksville c12fb69ca2 update protos 2020-05-10 14:17:05 -07:00
geeksville 8b911aba7f Cleanup build for NRF52 targets 2020-05-10 12:33:17 -07:00
geeksville 814c126e67 ugly WIP on switching to RadioLib, still need to set freq etc... 2020-04-29 14:54:03 -07:00
geeksville a7d153abcb CUSTOM GPIOs the SX1262MB2CAS shield when installed on the NRF52840-DK development board 2020-04-29 12:57:34 -07:00
geeksville b8b503cb0a Add starting point of PPR variants definition 2020-04-24 12:40:22 -07:00
geeksville bb885a5110 add a variant based on the nrf52840-dk but with a RC clock. 
Because I was dumb and accidentally ran some code that configured gpio 0
as an output and that was enough to smoke the xtal that was preinstalled
between P0.0 and P0.1.
 2020-04-24 12:30:06 -07:00