17 Commity (3162f74945a4e15b45d7e7585d419d01c8213d6e)

Autor	SHA1	Wiadomość	Data
Kevin Hester	023f1c24fb	RTC: add notion of 'quality' for different time sources ... Allow use of mesh based time until a GPS time arrives	2020-10-08 07:46:20 +08:00
Kevin Hester	f00d07baa3	RTC: pull rtc code into own file for cleanup	2020-10-08 07:28:57 +08:00
Kevin Hester	bdcd5c3981	allow reporting # sats before we ahve a fix	2020-10-08 06:22:25 +08:00
Kevin Hester	fc82e872d6	don't require gps to have lock before we'll trust GPS time	2020-10-08 05:23:52 +08:00
Kevin Hester	b47c54b5b6	keep lora radio totally unpowered when in deep-sleep	2020-10-07 17:52:44 +08:00
Kevin Hester	c0c83ad389	If we are not supposed to share locations make sure phone doesn't either	2020-10-07 17:46:25 +08:00
Kevin Hester	7a5832ab8a	SX1262: fix serious bug with detecting if we have a rx packet in progress ... Could cause hangs on the way into sleep (and enormous power consumption). Instead of checking for rx packet length (which only changes at completion) check if we've received preamble bits but haven't yet received a completed packet interrupt. notes: wait to sleep loop problem radio wait to sleep, txEmpty=0 radio wait to sleep, txEmpty=0 radio wait to sleep, txEmpty=0 radio wait to sleep, txEmpty=0 radio wait to sleep, txEmpty=0 radio wait to sleep, txEmpty=0 Can not send yet, busyRx radio wait to sleep, txEmpty=0 radio wait to sleep, txEmpty=0 radio wait to sleep, txEmpty=0 radio wait to sleep, txEmpty=0 radio wait to sleep, txEmpty=0 radio wait to sleep, txEmpty=0 radio wait to sleep, txEmpty=0 radio wait to sleep, txEmpty=0 vs normal run radio wait to sleep, txEmpty=0 radio wait to sleep, txEmpty=0 radio wait to sleep, txEmpty=0 radio wait to sleep, txEmpty=0 radio wait to sleep, txEmpty=0 radio wait to sleep, txEmpty=0 radio wait to sleep, txEmpty=0 radio wait to sleep, txEmpty=0 radio wait to sleep, txEmpty=0 radio wait to sleep, txEmpty=0 radio wait to sleep, txEmpty=0 radio wait to sleep, txEmpty=0 radio wait to sleep, txEmpty=0 radio wait to sleep, txEmpty=0 radio wait to sleep, txEmpty=0 Starting low level send (id=0x53fe1dd0 Fr0xe5 To0xff, WantAck0, HopLim3 encrypted) Completed sending (id=0x53fe1dd0 Fr0xe5 To0xff, WantAck0, HopLim3 encrypted)	2020-10-07 13:43:51 +08:00
Kevin Hester	044cc26340	#376 use power off command instead of killing gps power per manual 9.5	2020-10-07 11:44:30 +08:00
Kevin Hester	4ccd03623f	bug #376: disable the "wake on serial" feature, because it causes ... bogus wakes on TBEAMS because the USB->SERIAL chip pulls the RX input to ground. This feature is no longer needed because in !isRouter nodes we force the node to never sleep anyways when on USB power. // this doesn't work on TBEAMs when the USB is depowered (causes bogus interrupts) // So we disable this "wake on serial" feature - because now when a TBEAM (only) has power connected it // never tries to go to sleep if the user is using the API // gpio_wakeup_enable((gpio_num_t)SERIAL0_RX_GPIO, GPIO_INTR_LOW_LEVEL);	2020-10-06 14:24:08 +08:00
Kevin Hester	7854a22fbf	bug #376 - stop using pmu IRQ - we don't need it and it causes LS wakes	2020-10-06 12:45:19 +08:00
Kevin Hester	943d5cb08d	bug #376 we were not staying in light sleep as long as intended	2020-10-06 11:48:53 +08:00
Kevin Hester	7480eb1826	Change to use zeros for timeout values that are 'default'	2020-10-06 09:43:00 +08:00
Kevin Hester	ef146fc0b5	bug #376 - wip time only mode now works	2020-10-06 06:27:46 +08:00
Kevin Hester	736642455f	bug #376 wip - we now respect the new gps_operating_mode pref.	2020-10-06 05:34:56 +08:00
Kevin Hester	3c1c11e439	bug #376 wip - we now kill gps power when it is supposed to be asleep	2020-10-05 15:29:26 +08:00
Kevin Hester	b072eec4ac	wip for #376	2020-10-05 14:43:44 +08:00
geeksville	1907873831	gps wip for #376	2020-10-01 10:04:04 -07:00