mirror
/
stlink
kopia lustrzana https://github.com/stlink-org/stlink
1
0
Forkuj 0
Kod Zgłoszenia Packages Projekty Wydania Wiki Aktywność
301 Commity
3 Gałęzie
12 Tagi
19 MiB
Wykres commitów

301 Commity (e82da443bf0f113f7fc3cad71322a69f0db22360)

Autor SHA1 Wiadomość Data
Uwe Bonnes e82da443bf Print undecode chip_id too 2011-12-10 19:01:52 +01:00
Uwe Bonnes face2e7bab Add explicit dependancy on the stlink archive 2011-12-10 18:22:51 +01:00
Uwe Bonnes 48b604040a Fix leakage pathes for V1 2011-12-10 18:08:06 +01:00
Uwe Bonnes c1130cc3a6 Fix memory leakage pathe with no V2 device found 2011-12-10 17:59:20 +01:00
Uwe Bonnes bcee01d705 Chevck first for NULL before writing anything to the alloceted structure 2011-12-10 17:17:25 +01:00
Uwe Bonnes 2edd0530a6 Only call strtoul when there is an argument that strtoul can work on 2011-12-10 17:15:48 +01:00
le mentec fabien 592276c939 [update] apply patches from marpe@mimuw.edu.pl: stlink-sg.c unused/uninitialized variables 2011-11-22 10:04:36 -06:00
le mentec fabien bd1249c224 [update] apply patches from marpe@mimuw.edu.pl: strict aliasing issues, busy bit waiting 2011-11-22 09:54:55 -06:00
le mentec fabien e9586c100e [update] apply patches from marpe@mimuw.edu.pl for flash tool: verbosity, run after programm\ 2011-11-22 09:39:58 -06:00
Fabien Le Mentec 49569ccd6b [update] blink_flash makefile 2011-11-20 15:54:00 -06:00
texane a9237d7eb0 Merge pull request #29 from karlp/future_f1plusf4 
Eliminate SCSI pass through, fix F1 targets again, valgrind all the goodies
 2011-11-15 12:40:23 -08:00
Karl Palsson fd332562a7 Fix merge problem with flash verify for F4 
The F4 code had #ifdefd out the verification, as the page/sector size can be
too large to read in via a single transfer.  Pull the verification out to a
separate function, the flash write was getting far too large anyway.
 2011-11-15 19:56:14 +00:00
Karl Palsson 83a5eb2ed3 Merge branch 'tmaster' into future 
This branch should work for F1 and F4 devices.  It has currently been tested
with F1 value line, (a VL discovery board) programmed via gdb via both an
stlinkv1 and an stlinkv2.

F4 has _not_ yet been tested on this branch

Conflicts:
	.gitignore
	doc/tutorial/tutorial.pdf
	example/blink/main.c
	gdbserver/Makefile
	gdbserver/gdb-server.c
	src/stlink-common.c
	src/stlink-common.h
	src/stlink-usb.c
 2011-11-15 00:57:09 +00:00
Karl Palsson 794a560ebf Merge remote branch 'origin/libwork2' 2011-11-14 23:50:18 +00:00
Karl Palsson 8542b23c6e Update readme, as this is about to get messy! 2011-11-14 23:32:50 +00:00
Karl Palsson b55b75c3b9 Remove final reference to old sg/usb compilation flags 2011-11-14 23:01:03 +00:00
texane 5e1e150d5c Merge pull request #28 from jnosky/master 
Added code for gdbserver to support the full flash size of the STM32F4
 2011-11-14 13:32:02 -08:00
jnosky 768a70d321 Added code so gdbserver can fully support the STM32F4 variable page sizes 
gdbserver can now upload up to 1MB projects to flash
 2011-11-14 16:20:49 -05:00
jnosky 67db39b0b3 Changed size argument to hex 
Address was hex, size was decimal. Now uniform to be hex
 2011-11-14 16:16:57 -05:00
jnosky 93b186f15b Removed comment about STM32F4 limitations 2011-11-14 16:15:31 -05:00
texane 6ff401d4db Merge pull request #27 from csamuelson/master 
Unable to compile STM32F4 discovery_demo on Linux
 2011-11-13 22:16:45 -08:00
Karl Palsson 09d732d776 Keep netbeans happy 2011-11-14 04:14:41 +00:00
Karl Palsson 9ac1f0d9d6 Fix memory leaks closing v1 hardware. 
Thanks valgrind
 2011-11-14 04:12:49 +00:00
Karl Palsson dbe5391bd1 Remove dead code and unused variables 2011-11-14 04:12:29 +00:00
Karl Palsson d019d3fc4f Turn down default logging level. 
And remove dead/duplicate code that is included in the opening of the device
 2011-11-14 04:11:10 +00:00
Karl Palsson e509310406 Start up stlinkv1 faster. 
Now that we're not using sg, and we've told the kernel to ignore the device in
usb-mass storage, we don't need to close and wait 5 seconds.  We can just
immediately issue the command to switch modes.
 2011-11-14 03:52:19 +00:00
Karl Palsson a76c9ccfb3 Remove lots of dead code and superfluous trace 
Lots of the debug code is far too verbose for anything but usb tracing.
Likewise, remove all the old scsi code that was simply ifdefd out.
 2011-11-14 03:47:47 +00:00
Karl Palsson 55dd45cb49 Note that many of these "examples" are busted 2011-11-14 03:24:12 +00:00
Chris Samuelson 48931eb4c5 STM32F4 discovery_demo Makefile needed correct capitalization for Linux 2011-11-13 21:20:30 -06:00
Karl Palsson 93da0169c0 Remove confusing distclean/clean dichotomy 
in the top level, make clean cleans all stlink code.
in an application level, it only cleans that application
 2011-11-14 03:03:07 +00:00
Karl Palsson 2600d78b7c Start to keep an uptodate list of what's been tested in what combinations 2011-11-14 02:59:38 +00:00
Karl Palsson b48420e394 Don't refetch the chip id on every single page erase. 
And update some of the logging to be a bit tidier
 2011-11-14 02:51:16 +00:00
Karl Palsson a7c80d038f Fix linking with new names 2011-11-14 02:47:44 +00:00
Karl Palsson a7d14c7d4e Adding original source of vl factory demo 
It compiles, but I've got bugs preventing me from running this yet :(
 2011-11-14 02:47:44 +00:00
Karl Palsson fd1e3f5f2e Build libraries for stm32l1xx and stm32f10x 
These libraries IGNORE assert_param.  Maybe later.
 2011-11-14 02:47:44 +00:00
Karl Palsson 518fe1b0d0 Fix compile error with new libraries 2011-11-14 02:47:44 +00:00
Karl Palsson d69cad8849 Rename board specific demos as appropriate 2011-11-14 02:47:44 +00:00
Karl Palsson 3ec53a0d34 Rename 32L specific examples 2011-11-14 02:47:44 +00:00
Karl Palsson 29cf5d590c Restructure libs source to support multi platform 
The "libstm32l_discovery" was actually the ST std periph library, plus the
CMSIS core files.  Renamed it as such, and restructured the directories and
naming to make this easier to contain the std periph drivers for more than
just one board.

Verified with the LCD demo makefile, and loading it in sram again.
 2011-11-14 02:47:44 +00:00
Karl Palsson 77f2d8b76c Don't try reading device params in bad USB modes. 
You cannot read device params when we're not in debug mode and trying to will fill the USB buffer with garbage, and you will have to
unplug and replug and start again.  (which will fail, because, you're in the
wrong mode... :)
 2011-11-14 02:25:31 +00:00
Karl Palsson 3c6f2f5231 Fix flash writing for VL cores. 
The change from run->step breaks the VL cores.  Need to double check that this
still works for L cores.  The whole flash writing needs to be better
abstracted.

Lots more informational debug.
 2011-11-14 01:25:56 +00:00
texane 16d9f91c8c Merge pull request #25 from jnosky/master 
Examples directory update for stm32f4
 2011-11-12 23:22:44 -08:00
jnosky 3d3287aa95 Added note about STM32F4 flash support 2011-11-12 17:02:18 -05:00
jnosky 126c1cb026 Add STM32F4 discovery board demo and make file 2011-11-12 16:48:49 -05:00
jnosky fd49cd72b9 Added IO_Toggle demo and make file 2011-11-12 16:48:23 -05:00
jnosky ce6b40855b Added STM32F4xx Std Periph driver source and make file 2011-11-12 16:41:46 -05:00
jnosky f5316111c0 Removed binaries 2011-11-12 16:38:17 -05:00
jnosky 2f65f44249 Added IO_Toggle demo sources and make file 2011-11-12 16:22:49 -05:00
jnosky 51e5999583 Added STM32F4 discovery demo sources and make file 2011-11-12 16:22:03 -05:00
jnosky af0b374152 Added USB Device library sources 2011-11-12 16:21:04 -05:00