texane
5e1e150d5c
Merge pull request #28 from jnosky/master
...
Added code for gdbserver to support the full flash size of the STM32F4
2011-11-14 13:32:02 -08:00
jnosky
768a70d321
Added code so gdbserver can fully support the STM32F4 variable page sizes
...
gdbserver can now upload up to 1MB projects to flash
2011-11-14 16:20:49 -05:00
jnosky
67db39b0b3
Changed size argument to hex
...
Address was hex, size was decimal. Now uniform to be hex
2011-11-14 16:16:57 -05:00
jnosky
93b186f15b
Removed comment about STM32F4 limitations
2011-11-14 16:15:31 -05:00
texane
6ff401d4db
Merge pull request #27 from csamuelson/master
...
Unable to compile STM32F4 discovery_demo on Linux
2011-11-13 22:16:45 -08:00
Karl Palsson
09d732d776
Keep netbeans happy
2011-11-14 04:14:41 +00:00
Karl Palsson
9ac1f0d9d6
Fix memory leaks closing v1 hardware.
...
Thanks valgrind
2011-11-14 04:12:49 +00:00
Karl Palsson
dbe5391bd1
Remove dead code and unused variables
2011-11-14 04:12:29 +00:00
Karl Palsson
d019d3fc4f
Turn down default logging level.
...
And remove dead/duplicate code that is included in the opening of the device
2011-11-14 04:11:10 +00:00
Karl Palsson
e509310406
Start up stlinkv1 faster.
...
Now that we're not using sg, and we've told the kernel to ignore the device in
usb-mass storage, we don't need to close and wait 5 seconds. We can just
immediately issue the command to switch modes.
2011-11-14 03:52:19 +00:00
Karl Palsson
a76c9ccfb3
Remove lots of dead code and superfluous trace
...
Lots of the debug code is far too verbose for anything but usb tracing.
Likewise, remove all the old scsi code that was simply ifdefd out.
2011-11-14 03:47:47 +00:00
Karl Palsson
55dd45cb49
Note that many of these "examples" are busted
2011-11-14 03:24:12 +00:00
Chris Samuelson
48931eb4c5
STM32F4 discovery_demo Makefile needed correct capitalization for Linux
2011-11-13 21:20:30 -06:00
Karl Palsson
93da0169c0
Remove confusing distclean/clean dichotomy
...
in the top level, make clean cleans all stlink code.
in an application level, it only cleans that application
2011-11-14 03:03:07 +00:00
Karl Palsson
2600d78b7c
Start to keep an uptodate list of what's been tested in what combinations
2011-11-14 02:59:38 +00:00
Karl Palsson
b48420e394
Don't refetch the chip id on every single page erase.
...
And update some of the logging to be a bit tidier
2011-11-14 02:51:16 +00:00
Karl Palsson
a7c80d038f
Fix linking with new names
2011-11-14 02:47:44 +00:00
Karl Palsson
a7d14c7d4e
Adding original source of vl factory demo
...
It compiles, but I've got bugs preventing me from running this yet :(
2011-11-14 02:47:44 +00:00
Karl Palsson
fd1e3f5f2e
Build libraries for stm32l1xx and stm32f10x
...
These libraries IGNORE assert_param. Maybe later.
2011-11-14 02:47:44 +00:00
Karl Palsson
518fe1b0d0
Fix compile error with new libraries
2011-11-14 02:47:44 +00:00
Karl Palsson
d69cad8849
Rename board specific demos as appropriate
2011-11-14 02:47:44 +00:00
Karl Palsson
3ec53a0d34
Rename 32L specific examples
2011-11-14 02:47:44 +00:00
Karl Palsson
29cf5d590c
Restructure libs source to support multi platform
...
The "libstm32l_discovery" was actually the ST std periph library, plus the
CMSIS core files. Renamed it as such, and restructured the directories and
naming to make this easier to contain the std periph drivers for more than
just one board.
Verified with the LCD demo makefile, and loading it in sram again.
2011-11-14 02:47:44 +00:00
Karl Palsson
77f2d8b76c
Don't try reading device params in bad USB modes.
...
You cannot read device params when we're not in debug mode and trying to will fill the USB buffer with garbage, and you will have to
unplug and replug and start again. (which will fail, because, you're in the
wrong mode... :)
2011-11-14 02:25:31 +00:00
Karl Palsson
3c6f2f5231
Fix flash writing for VL cores.
...
The change from run->step breaks the VL cores. Need to double check that this
still works for L cores. The whole flash writing needs to be better
abstracted.
Lots more informational debug.
2011-11-14 01:25:56 +00:00
texane
16d9f91c8c
Merge pull request #25 from jnosky/master
...
Examples directory update for stm32f4
2011-11-12 23:22:44 -08:00
jnosky
3d3287aa95
Added note about STM32F4 flash support
2011-11-12 17:02:18 -05:00
jnosky
126c1cb026
Add STM32F4 discovery board demo and make file
2011-11-12 16:48:49 -05:00
jnosky
fd49cd72b9
Added IO_Toggle demo and make file
2011-11-12 16:48:23 -05:00
jnosky
ce6b40855b
Added STM32F4xx Std Periph driver source and make file
2011-11-12 16:41:46 -05:00
jnosky
f5316111c0
Removed binaries
2011-11-12 16:38:17 -05:00
jnosky
2f65f44249
Added IO_Toggle demo sources and make file
2011-11-12 16:22:49 -05:00
jnosky
51e5999583
Added STM32F4 discovery demo sources and make file
2011-11-12 16:22:03 -05:00
jnosky
af0b374152
Added USB Device library sources
2011-11-12 16:21:04 -05:00
jnosky
ec7a84c540
Added USB Host library sources
2011-11-12 16:20:02 -05:00
jnosky
428744bbe3
Added STM32F4xx StdPeriph Driver sources
2011-11-12 16:19:17 -05:00
jnosky
c2fa32ce2b
Added USB OTG Driver sources
2011-11-12 16:17:43 -05:00
jnosky
4856df1aad
Added STM32F4-Discovery utilities
2011-11-12 16:17:03 -05:00
jnosky
6b26cc09ad
Added my email
2011-11-12 16:16:15 -05:00
Karl Palsson
0c587eedfd
Read chip and core id in device param loading.
...
Instead of expecting everyone to read it every time they need to check it.
Just assume it's always there.
2011-11-12 20:45:41 +00:00
Karl Palsson
5a5d36fdc3
Move all the flash size mapping from gdb server into core.
...
All the device params like flash size and page size should all be in the core open routines, not
_only_ in the gdbserver. (This should stop it from ending up duplicated in the core, and get rid of
some of the hacks that were turning up. All of this is chip specific!)
2011-11-12 20:36:43 +00:00
Fabien Le Mentec
0ff09f90ce
[merge] merge jnosky/master
2011-11-12 02:25:02 -06:00
Fabien Le Mentec
13c0da3bcc
Merge branch 'jnosky/master'
2011-11-12 01:49:08 -06:00
Karl Palsson
6cc3375151
Merge branch 'master' of github.com:karlp/stlink
2011-11-11 22:59:44 +00:00
Karl Palsson
e9a205ff98
Finish removing sg-utils dependencies.
...
The code deps were removed, but the flags stayed in some makefiles.
2011-11-11 15:38:09 +00:00
Karl Palsson
5ac2c52296
Merge pull request #1 from PetteriAimonen/master
...
Here is a fix for the register bug :)
2011-11-11 07:30:21 -08:00
jnosky
b32eb29a80
Changed chip detection method
...
Future plan to detect chip ID rather than core ID
2011-11-10 20:15:06 -05:00
jnosky
d6ab5b0c3f
Temp fix to work with F4 up to 64k of flash, changed chip detection
...
Can debug with up to 64k flash on the F4
2011-11-10 20:12:29 -05:00
jnosky
43974f34ad
Added the IO_Toggle and discovery demo samples including a working make
...
Can now build and flash these these samples
2011-11-10 20:09:20 -05:00
jnosky
bd8b822e97
Added all the F4 libraries to the project
...
Allows the F4 discovery examples to be built
2011-11-10 20:06:27 -05:00