sane-project-backends/tools
Stéphane Voltz 3d89a6f880 add new gl124 asic
create a place holder for low level commands

move low level functions to genesys_low.c

GL124 progresses

enable genesys_low debug and add DAC for LiDE 110

gl124 WIP
- gl847 cleanups
- genesys_low refactor
- gl124 starting version

GL124 WIP
- read scancnt/fedcnt,valid words coded
- memory layout coded

LiDE110 WIP

GL 124 WIP
- definition and use of get/set double/triple
- define register names

all mods done, ready to test

set fe OK

GL124 WIP : ready to test scans

GL124 WIP

GL124 WIP
- fixed analog fe issue: don't put afe regs in global set

GL124 : first light at 300 dpi

GL124 WIP
- 300 and 600 uncalibrated mostly ok (x coordinate rounding)
- 150 and 75 OK x-wise, y to be solved

solved rounding errors for gl124

re-add 400, 200 and 100 dpi modes

GL124 : tous x dpi OK

before adding line cropping

GL124 : line cropping almost finished

GL124 WIP : working line deletion

compute step rework

GL124 WIP : high speed table for dpi <= 300

move to scan area working

line skipping fix

new slope table for 600 dpi base

geometry and movement tuned

GL124 WIP : shading calibration almost working

working 600 dpi shading

GL124 : working shading calibration for all modes but 1200 dpi

working 1200 dpi shading

beta 1 of GL124 support

last tuning

update genesys.desc for LiDE 110

motor slope and start area tuning

shading coefficient computing clean up

add support for GL124 based CanoScan LiDE 110

feed almost OK up to 300 dpi

feeding is fixed

all issues fixed
2010-12-14 18:23:23 +01:00
..
hotplug Add basic .gitignore files 2009-05-04 14:45:17 +02:00
hotplug-ng Add basic .gitignore files 2009-05-04 14:45:17 +02:00
openbsd
…
.gitignore updated ukranian translation from Yuri Chornoivan 2010-04-21 08:36:12 -04:00
Makefile.am * Makefile.in, aclocal.m4, configure, */Makefile.in: Regenerated 2009-05-03 22:01:23 +00:00
Makefile.in Added Samsung SCX-4500W scan over network support for xerox_mfp backend (by Alexander Kuznetsov). 2010-09-30 15:11:56 +04:00
README
…
RenSaneDlls.cmd
…
check-po.awk
…
check-usb-chip.c add new gl124 asic 2010-12-14 18:23:23 +01:00
epson2usb.pl epson2: added tool to generate device list 2010-12-12 16:19:51 +01:00
gamma4scanimage.c
…
libtool-get-dll-ext
…
mustek600iin-off.c
…
sane-backends.pc.in Fix pkg-config file syntax 2010-04-26 21:13:44 +02:00
sane-config.in fix typo in tools/sane-config.in. REGMGR=RESMGR. 2010-04-25 15:49:27 -05:00
sane-desc.c udev rules: set libsane_matched=yes for SCSI scanners too 2010-06-21 19:01:51 +02:00
sane-find-scanner.c Updated Swedish translation, fix libusb warning. 2009-09-11 05:11:31 +02:00
umax_pp.c umax_pp: define _XOPEN_SOURCE for putenv() 2010-06-23 18:21:38 +02:00
xerox
…

README

2006-05-10

This directory contains various tools that may be useful:

 hotplug/:
        Linux hotplug script and an automatically generated config file
        (libsane.usermap) used to change the permissions on the libusb "device
        nodes" in /proc/bus/usb/ when a scanner is plugged in. For newer Linux
        kernels, you may need to use udev instead.  Please read the README file
        in this directory for instructions.

 hotplug-ng/:
        Linux hotplug-ng script and an automatically generated config file
        (libsane.db) used to change the permissions on the libusb "device nodes"
        in /proc/bus/usb/ when a scanner is plugged in. For newer Linux kernels,
        you may need to use udev instead.  Please read the README file in this
        directory for instructions.

 udev/:
	Contains a automatically generated udev rules file. udev now replaces
	hotplug and provides all the functionalities of hotplug. libusb 0.1.12
	or newer is necessary.

 openbsd/:
 	Contains example scripts for hotplugd(8) for USB scanners accessed via
	libusb.

 sane-find-scanner:
        Attempts to find a SCSI scanner attached to your system.
        Invoke with "sane-find-scanner -h" to get command-line
        syntax. More details can be found in the man page
        sane-find-scanner(1).

 xerox:
        A simple script to make photocopies ("xeroxing").  In
        the script, you may need to adjust the device name
        assigned to variable DEV and the resolution assigned
        to variable RES as well as the paper with and height
        (variables WIDTH and HEIGHT, respectively.

 mustek600iin-off:
        Allows you to turn off a Mustek 600 II N scanner.
        Use "make mustek600iin-off" to compile.

 umax_pp:
	Command line utility to scan on UMAX astra 1220P,
	1600P and 2000P, without using the backend. So that
	scanner protocol can be tested directly.

 gamma4scanimage: Creates a gamma table in the format expected by scanimage.
	You can define a gamma value, shadow and highlight. 
	Take a look at manual page gamma4scanimage for further information.

 RenSaneDlls.cmd: Convert backend-DLL-filenames according to 8.3 naming
        convention necessary for DLLs on OS/2.

Maybe useful for SANE developers:

 sane-config:
        Show SANE version, linker flags etc. Might be useful for 
        frontend developers.

 sane-desc:
        Generate SANE webpages (and ASCII lists) from backend .desc files.
        Run "sane-desc --help" for details. The default lists are generated
        in doc/Makefile. 

 check-po.awk:
        Print untranslated and fuzzy messages and their line numbers in the
        source code and po file. Example:
           cd po/ ; ../tools/check-po.awk sane-backends.de.po
        You may need to adjust the path of awk in the first line of the
        script. More documentation is in the script itself.