Peter Fales
cd8e633206
Update Kodak URLs
2003-03-07 14:12:00 +00:00
Henning Geinitz
0bb508a879
Small requests are done with a response buffer of 8 bytes (instead of 64)
...
now. Looks like GT-6816 based scanners return 8 bytes if the firmware is
loaded and 64 bytes if it's not loaded. Changed GT-6816 firmware check to
ignore errors from above change. GT-6816 scanners work with the BSDs now (at
least once). Updated manpage concerning the BSDs.
2003-03-06 14:27:54 +00:00
Oliver Schirrmeister
f9d7350534
* backend/fujitsu.c, backend/fujitsu.h: renamed some variables
...
* backend/fujitsu.c: gray duplex scanning now works with the 4097D
when disconnect is enabled in the scsi-controller
* doc/descriptions/unsupported.desc: remove fujitsu fi4120C
* doc/descriptions/fujitsu.desc added fi4120C, ScanParter 93GX
2003-03-05 12:56:44 +00:00
Henning Geinitz
a4b5a465fd
Removed Umax AstraSlim (now supported by artec_eplus48u backend).
2003-03-04 23:58:23 +00:00
Henning Geinitz
bf357a6b9a
Changed the example to use /dev/sg0 instead of /dev/sge.
2003-03-04 23:55:47 +00:00
Gerhard Jaeger
ca786b2c28
Bug-fix update for Genius, HP2100c and EPSON Photo devices.
2003-03-03 14:34:20 +00:00
Henning Geinitz
a04ea4b251
Make sure that the firmware for plustek-like scanners is loaded. Didn't work
...
for Genius vivid3xe. Added both Genius scanners to man page. Removed warning
from Genius Vivid3xe.
2003-03-02 22:08:50 +00:00
Michael Herder
6520e41917
*** empty log message ***
2003-03-02 06:55:18 +00:00
Henning Geinitz
f8b385aca1
Updated Microtek scanners. Added Umax AstraSlim SE.
2003-03-01 17:39:57 +00:00
Henning Geinitz
175a070af6
Added Ricoh IS-430.
2003-03-01 17:38:27 +00:00
Ulrich Deiters
bf3546ca14
adjusted backend/canon-sane.c to use the new sanei_constrain_value()
...
made some cosmetic changes to reduce the number of compiler warnings
2003-02-28 09:35:24 +00:00
Henning Geinitz
4558610025
Added Compaq S4 100 and Microtek Scanmaker 4800.
2003-02-27 23:06:09 +00:00
Henning Geinitz
4b00890161
Added Genius Colorpage Vivid3xe. Added request_type and request fields to the
...
command set. Request is 0x01 or 0x04.
2003-02-27 17:31:52 +00:00
Ulrich Deiters
540656fd72
mentioned the new FB1200S in the man pages
2003-02-26 17:52:40 +00:00
Henning Geinitz
0dcf319756
Added :new token.
2003-02-26 15:34:27 +00:00
Henning Geinitz
113152bbed
Removed hp5400 series (now in hp5400.conf). Added Lexmark, Medion and Primax
...
scanners.
2003-02-26 14:31:38 +00:00
Henning Geinitz
1bbf2101e6
Added Visioneer OneTouch 8600.
2003-02-26 14:29:48 +00:00
Henning Geinitz
ccb0bbe80d
Added description for hp5400 backend. It supports the Hewlett-Packard 5400,
...
5470 and (maybe) 5490 scanners.
2003-02-26 14:25:46 +00:00
Stéphane Voltz
5ed8c99cb7
- changed 'gain' option name to 'brightness'
...
- changed 'highlight' option name to 'contrast'
2003-02-25 07:04:12 +00:00
Henning Geinitz
141a7159d9
Some parts concerning PRJECTS/.desc files are rewritten. Added information
...
about initializing global variables and sizeof (void *) != sizeof (int) (from
Martijn van Oosterhout <kleptog@svana.org>).
2003-02-24 21:16:44 +00:00
Henning Geinitz
d452194baa
Removed.
2003-02-24 21:06:31 +00:00
Henning Geinitz
47d5a76da0
Added documentation for ma1509 backend.
2003-02-24 21:05:18 +00:00
Frank Zago
d5a3bf7234
Added Mitsubishi to the list of vendors.
2003-02-22 19:45:24 +00:00
Frank Zago
3d92598acd
Added Relisys in the list of vendors. Bumped the revision date.
2003-02-22 18:43:45 +00:00
Henning Geinitz
3cf8377bee
Initialize global variables in sane_init.
2003-02-22 16:54:22 +00:00
Henning Geinitz
7e4fe2df10
Iniatialize global variables explicitely. Mention ma1509.
2003-02-22 16:48:02 +00:00
Henning Geinitz
8dedb6c862
Explicitely initialize global variables to avoid segfaults when calling
...
sane_init/sane_exit more than once.
2003-02-22 16:22:25 +00:00
Henning Geinitz
99a1cf050f
Add Ricoh IS-420.
2003-02-22 15:38:34 +00:00
Henning Geinitz
b0d7681738
Initialize global variables in sane_init to avoid segmentation faults when
...
sane_init/sane_exit is run more than once.
2003-02-22 15:37:19 +00:00
Henning Geinitz
a0251b6cc1
Added vid/pid 0x07b3/0x0400 to gt68xx.conf also. Added indormation about
...
Medion 4394. Mention ma1509 backend. Fix segfault when calling sane_open with
an empty device name.
2003-02-22 15:34:51 +00:00
Henning Geinitz
098f57adb0
Removed Fujitsu fi-4220C (now supported by fujitsu backend). Added Syscan
...
Travelscan 464. Updated HP scanners.
2003-02-20 18:18:44 +00:00
Oliver Schirrmeister
d74d4231ce
patch from <ron@roncemer.com>
...
fi4220 support
usb support
2003-02-20 13:33:07 +00:00
Henning Geinitz
f4ccae6565
Added Avision, Brother, and Umax scanners. Removed Mustek BearPaw 1200F.
2003-02-19 19:35:12 +00:00
Henning Geinitz
919fcac4c2
Added description of the ma1509 backend for Mustek BearPaw 1200F scanners.
2003-02-19 19:32:37 +00:00
Henning Geinitz
b9a6e5cc4a
Make sure that the result of the reader_process is interpreted
...
correctly. Block signals when waiting for a SCSI request to finish. Otherwise
we may get a segfault if the reader_process is terminated while waiting.
2003-02-17 12:05:56 +00:00
Henning Geinitz
57e852ea8a
List BearPaw 2400 CS Plus as supported. Make fast preview the default
...
(otherwise BP 2400 TA Plus wouldn't work with 12/16 bits). Added vid/pid
0x07b3/0x0400, that's another Plustek OpticPro 1248U.
2003-02-16 21:31:45 +00:00
Henning Geinitz
b92a3a30ef
Added Artec scanners.
2003-02-16 20:35:40 +00:00
Rene Rebe
57c894e2d3
more avision.desc fixes and improvements
2003-02-16 20:00:38 +00:00
Rene Rebe
14fbbc3066
spelling fix and forgotten Mitsubishi scanner
2003-02-16 19:16:03 +00:00
Rene Rebe
afbaf8650f
fix the avision.desc
2003-02-16 19:13:01 +00:00
Henning Geinitz
cb82756da0
Updated version.
2003-02-16 19:05:58 +00:00
Rene Rebe
2f8f90a79a
Update to the latest Avision backend release. It includes feature
...
and stability improvements and bug fixes. The sane man-page now
mentions that the avision backend supports more than the AV 630 CS ...
2003-02-16 17:35:05 +00:00
Henning Geinitz
9f2a495e22
Updated Canon, Fujitsu, and Plustek entries.
2003-02-13 22:34:48 +00:00
Peter Fales
500518ecc1
Add mention of the commented out gphoto2 entry in dll.conf
2003-02-12 02:23:46 +00:00
Henning Geinitz
89ceb522f2
More warnings about security issues. Make more clear that -s and -d can't be
...
used in inetd mode.
2003-02-09 15:48:54 +00:00
Henning Geinitz
403f2e4241
Added Genius Colorpage Vivid III. Added more info for Plustek OpticPro 1212U
...
and U12/UT12.
2003-02-06 22:54:23 +00:00
Henning Geinitz
5b79536901
Fixed resolutions for BearPaw 1200 TA. Increase the lowest black for CCD
...
coarse calibration. Adjusted internal gamma correction. CCD scanners use
color mode for coarse+quality cal now. Preview isn't always in 8 bit mode now
(can be selected by option). Upper and lower limits for coarse calibration are
unified now. Added options for adjusting gain and offset.
2003-02-05 16:02:45 +00:00
Michael Herder
b88fb0a410
*** empty log message ***
2003-02-04 18:01:24 +00:00
Peter Kirchgessner
34251d3fae
OS/2-support added
2003-02-02 17:08:31 +00:00
Jochen Eisinger
9eeabee526
2003-01-03 Jochen Eisinger <jochen.eisinger@gmx.de>
...
* doc/descriptions/mustek_pp.desc: cleaned up the file a little
2003-02-02 16:28:11 +00:00
Henning Geinitz
2ba295fc25
Unified manufacturer names. Minor bugfixes.
2003-02-02 15:45:00 +00:00
Henning Geinitz
381cd383de
Added Artec AM12e+.
2003-02-01 10:52:33 +00:00
Henning Geinitz
c92b3b6123
Added plustek to list of directories.
2003-01-31 20:10:45 +00:00
Gerhard Jaeger
7d13614480
*** empty log message ***
2003-01-31 12:36:44 +00:00
Henning Geinitz
3bd921ab97
Added Canon, Fijitsu and Prolink scanners.
2003-01-30 18:08:09 +00:00
Henning Geinitz
8012e306c8
Added Mustek parport scanners. Added more information for Primascan Colorado
...
2600u.
2003-01-24 22:01:38 +00:00
Jochen Eisinger
f1a4d9514e
2003-01-24 Jochen Eisinger <jochen.eisinger@gmx.de>
...
* doc/descriptions/mustek_pp.desc: added supported scanners
2003-01-24 21:12:03 +00:00
Gerhard Jaeger
ee94f0caf1
Minor fixes and prototype description updates, code cleanup, doc update.
2003-01-24 11:44:04 +00:00
Andras Major
5f1314d8c4
*** empty log message ***
2003-01-24 03:14:54 +00:00
Karl Heinz Kremer
8c3299d9aa
Added Perfection 3200 / GT-9800
2003-01-24 00:54:11 +00:00
Henning Geinitz
184e830c86
Added Primax/Visioneer Primascan Colorado 2600u and UMAX Astra 4500.
2003-01-23 23:08:08 +00:00
Karl Heinz Kremer
4f25d39c42
Corrected syntax for GT-6000 entry.
2003-01-23 01:22:18 +00:00
Karl Heinz Kremer
716bffdf02
Added "SCSI" interface to GT-6000 entry.
2003-01-22 02:07:44 +00:00
Eddy De Greef
2fe806cb51
Compile warning fix and minor debug message fixes.
2003-01-21 21:45:00 +00:00
Karl Heinz Kremer
00cf6a6a13
Replaced :new with :alpha
2003-01-20 21:58:34 +00:00
Karl Heinz Kremer
0f701cfaa2
Added information about MFDs (multi-functional devices, scanners with
...
printers) to documentation and sane_usb.c file.
2003-01-19 19:17:29 +00:00
Henning Geinitz
6d895dbc7b
Removed wrong "untested" flag from Mustek AE USB and Lexmark X70/X73 scanners.
2003-01-18 11:46:15 +00:00
Henning Geinitz
97f05aa3a6
Added HP ScanJet 3500c, 3530c, 3570c, 3570cxi, 5500C and Microtek ScanMaker
...
3800. Updated link for ScanJet 4470C.
2003-01-17 12:28:17 +00:00
Frank Zago
4c36caa5ac
*** empty log message ***
2003-01-17 01:56:01 +00:00
Henning Geinitz
4740e6b7f1
Added HP 5490c.
2003-01-15 14:30:06 +00:00
Henning Geinitz
95dafc40f8
Added Artec Ultima 2000 (0x4001 model), Canon CanoScan D660U, Compaq S200, Epson
...
Perfection 660, HP ScanJet 4570C, Microtek ScanMaker 3630. Updated ScanJet 5400C and
5470C URLs, Canon FB1210 information.
2003-01-14 21:02:24 +00:00
Henning Geinitz
0d10c6c6f2
Added remark about old name of usbfs.
2003-01-14 20:38:01 +00:00
Gerhard Jaeger
4d0cba9aab
Added HP2300C to unsupported.desc and provided some chipset info for
...
Plustek scanners.
2003-01-13 12:22:38 +00:00
Jochen Eisinger
47e110e473
2003-01-12 Jochen Eisinger <jochen.eisinger@gmx.de>
...
* doc/sane-mustek_pp.man, doc/descriptions/mustek_pp.desc,
backend/mustek_pp*: replaced the old mustek_pp backend with
version 12-alpha. This version fully supports CIS scanners but
removes support for 600dpi CCD scanners and the 300dpi CCD
support isn't yet working. In contrary to the old backend, this
version is based on information provided by Mustek. For now,
the backend exports lots of illegal symbols, this will be fixed
before code freeze. Also the .desc file is empty and will be updated
soon.
* AUTHORS: added Eddy De Greef who wrote the CIS hardware driver part
2003-01-12 19:44:26 +00:00
Gerhard Jaeger
2ee6160143
Removed unsupported devices from plustek.desc
...
Removed OpticPro 16B from unsupported.desc
2003-01-12 13:42:26 +00:00
Michael Herder
dab9a15282
New models added
2003-01-12 08:05:29 +00:00
Henning Geinitz
4b4f26f500
Updated status for the BSDs.
2003-01-11 23:47:30 +00:00
Gerhard Jaeger
0140fad1bd
Added some information about the Plustek backend.
...
Updated the Plustek description file.
Updated the unsupported description file.
2003-01-11 14:27:15 +00:00
Henning Geinitz
38406423c3
Some Primax scanners (and clones) are now supported by the primax backend.
2003-01-11 12:18:28 +00:00
Gerhard Jaeger
8ba08fdfca
Update to version 0.45, added some new models and support for libusb.
2003-01-10 13:32:11 +00:00
Henning Geinitz
3451798f08
Updated (From Karsten Festag <karsten.festag@gmx.de>).
2003-01-09 18:07:17 +00:00
Henning Geinitz
9f0d82980b
Updated manpage and .desc concerning Lexmark X70. Updated manpage concerning
...
kernel 2.4.21-pre3 containing the 1-endpoint fix. Fixed A3 USB resolution
setting. Updated A3 USB margins (Pedro Morais <morais@inocam.com>). Added
detection of Genius Colorpage Vivid3x. It's unknown if it works. Updated
.desc file. Don't print calib line warnings by default.
2003-01-09 18:05:01 +00:00
Oliver Schwartz
42f2440739
Update to snapscan backend 1.4.18
2003-01-08 21:45:28 +00:00
Henning Geinitz
6f96e5795c
Added Canon CanoScan D1250U2 and HP ScanJet 4400C.
2003-01-08 15:38:30 +00:00
Henning Geinitz
6b888cf8d4
Use uniform model names for HP scanners.
2003-01-08 15:36:34 +00:00
Peter Kirchgessner
429aa6e156
anged GP ScanJet to ScanJet in hp.desc
2003-01-07 06:41:46 +00:00
Stéphane Voltz
6ee9e076de
- man update
...
- model name change
2003-01-07 06:16:39 +00:00
Peter Fales
d68fecc63b
Update author info
2003-01-07 05:39:47 +00:00
Peter Fales
ff4cea927c
Updated author info and description
2003-01-07 05:35:52 +00:00
Matthew Duggan
e9220432d0
2003-01-07 Matthew Duggan <stauff1@users.sourceforge.net>
...
* backend/canon_pp-dev.c: Improve/fix detection logic.
* doc/descriptions/canon_pp.desc: Bump version number.
2003-01-07 05:14:28 +00:00
Henning Geinitz
6a432ce796
Added Genius HR7X Slim, Visioneer 6200 and Onetouch 8920.
2003-01-04 15:28:42 +00:00
Henning Geinitz
c071d883d8
Added list of (known) scanners that are not supported by a SANE backend. There
...
may be information about them or even a standaalone program to which the
entries point.
2002-12-31 15:11:35 +00:00
Henning Geinitz
f99fead914
Added (from PROJECTS).
2002-12-31 15:09:12 +00:00
Henning Geinitz
b6f598d228
Minor formatting change.
2002-12-30 13:45:44 +00:00
Henning Geinitz
f63abd633e
Make sure that frontend bugs concerning the select fd are detected.
2002-12-30 13:44:27 +00:00
Henning Geinitz
02e2a1b0e4
Removed (now included).
2002-12-30 13:38:00 +00:00
Henning Geinitz
7baae1765f
Added description files for scanwit and viceo backends.
2002-12-30 13:36:25 +00:00
Henning Geinitz
e619e54b86
Use Hewlett-Packard consitantly (instead of HP).
2002-12-30 13:12:25 +00:00
Henning Geinitz
b97a0721b5
Updated ScanExpress 2400 USB values. Added implementation of gt6801 lamp
...
control for CCD scanners. Added flag for SE 2400 USB, added some quirks in
gt68xx_gt6801.c. Fixed gt68xx_gt6801 -> lamp control. Adjusted Plustek 1248U
geometry and afe values. CCD gross calibration changed: start with the default
value from module struct. Is faster now for most cases. Only 2.5 mm of
calibration for GT-6801 scanners. Added "afe" option for gt68xx.conf for
selecting default afe values. Removed AFE and exposure SANE options. Added
documentation for afe option in gt68xx.conf. New version: 1.0-35.
2002-12-30 13:05:24 +00:00
Henning Geinitz
76524496d9
Updated NEW! markers.
2002-12-08 21:04:49 +00:00
Henning Geinitz
7f699acfe3
Coarse calibration for first scan only" is off by default now. Added gamma
...
table factor option (SANE_CAP_EMULATED). Setup gamma to 2.0 by default. Fixed
(hopefully) sigpipe when cancelling. No geometry quantization anymore (not
necessary). Plustek 1248U: do linemode for every resolution, fix color
correction. Added comments for every Model member in gt68xx_devices. Added
Plustek UT16B and Genius Vivid3x to .desc. Added implementation for inverted
offset for CCD scanners. Added Mustek ScanExpress 2400 USB. Well, at least
it's detected. Added NEW marker to .desc.
2002-12-08 21:00:31 +00:00
Henning Geinitz
3f4ec5c9a5
The "scsi ..." way of specifying devices is not Linux-only. Some minor
...
formatting updates.
2002-12-07 23:05:32 +00:00
Henning Geinitz
08c2f84690
Removed LEVEL2.
2002-12-06 23:27:30 +00:00
Henning Geinitz
0196d1a4e6
Updated contact information.
2002-12-06 20:49:47 +00:00
Peter Kirchgessner
45bd96d0e7
Add missing .html to homepage link
2002-12-06 20:19:30 +00:00
Peter Kirchgessner
35f5cdf6e0
Add option to work around "error during device I/O"
2002-12-06 20:14:36 +00:00
Henning Geinitz
02e9fd83aa
Removed link to ACard problem.
2002-12-06 14:29:23 +00:00
Henning Geinitz
799dab5533
Updated links.
2002-12-05 08:48:22 +00:00
Henning Geinitz
9e0f5f2a58
Ignore comments that are in the same line as the backend entries. Minor
...
manpage fixes.
2002-12-04 20:25:13 +00:00
Matthew Duggan
d44ae2c92e
2002-12-04 Matthew Duggan <stauff1@users.sourceforge.net>
...
* backend/canon_pp-dev.c: Don't compare firmware version numbers -
multiple versions do actually exist.
* doc/descriptions/canon_pp.desc: Bump version number.
2002-12-04 05:35:38 +00:00
Rene Rebe
e3ba635904
Updated the avision man-page to reflect the current driver development.
2002-12-01 19:17:47 +00:00
Rene Rebe
f0acf4c68a
syntax fix
2002-12-01 19:05:50 +00:00
Rene Rebe
3e1655a2ce
New avision backend - including the auto-generated .desc file.
2002-12-01 13:42:18 +00:00
Henning Geinitz
a40d7154ee
Changed "-" to "\-" in .SH NAME section (required by man 7 man).
...
Added PACKAGEVERSION and "SANE Scanner Access Now Easy" to header.
2002-11-29 20:15:39 +00:00
Henning Geinitz
7cd9688e1f
Added missing quotes around PACKAGEVERSION.
2002-11-29 18:50:27 +00:00
Henning Geinitz
346a2c66fb
PACKAGEVERSION fix. Removed HP exception. Added MacOS X.
2002-11-29 18:29:57 +00:00
Henning Geinitz
a543ca8242
PACKAGE_VERSION fix. Fixed debug message in do_stop: really print exit status
...
of reader process.
2002-11-29 18:22:00 +00:00
Henning Geinitz
991bd09675
Fixed PACKAGE_VERSION breakage. PACKAGE_VERSION was redefined by autoconf 2.5
...
with a different meaning. Use PACKAGE_STRING instead.
2002-11-29 18:19:58 +00:00
Peter Kirchgessner
2869385331
hp-backend V 1.00 (libusb support
2002-11-25 20:40:43 +00:00
Peter Kirchgessner
a3cdfce816
Add support for libusb to hp-backend
2002-11-25 20:39:38 +00:00
Rene Rebe
71bbc23961
Updated the Avisin backend to my todays snapshot. It supports more devices
...
as well as ADF and A3 size.
Massive code cleanups.
2002-11-23 16:17:07 +00:00
Henning Geinitz
c28da4c875
Formatting updates.
2002-11-22 18:20:32 +00:00
Henning Geinitz
5ac9d310be
Use "--option arg" format for all options. Other formatting fixes.
2002-11-22 17:47:45 +00:00
Henning Geinitz
fd26691d60
Formatting fixes. Updates some backend entries and sane-find-scanner. Some
...
clarifications.
2002-11-22 16:37:28 +00:00
Henning Geinitz
089b24e539
Changed 150 to 200 dpi for Mustek BearPaw 2400 TA. Fixed warnings in
...
gt68xx_low.c. Used DBG instead of XDBG ing gt68xx_low.c. Minor manpage
fixes. Added man page links to other backends. gt68xx_low.h: Fixed
__FUNCTION__ bug on non-gcc compilers. Added more details about the BSDs in
the manpage. Fixed color order for ScanExpress A3 USB.
2002-11-21 22:09:16 +00:00
Henning Geinitz
5616e7687d
Minor fixes. Added links to ther backends providing support for Mustek
...
scanners.
2002-11-21 21:52:33 +00:00
Henning Geinitz
8579e4d517
Minor manpage fixes. Added links to similar backends. More information about
...
non-Linux OS.
2002-11-21 21:38:43 +00:00
Michael Herder
4ea774818c
Modified due to check-in of artec_eplus48u backend
2002-11-20 12:23:07 +00:00
Michael Herder
e33067f8ea
Initial check-in
2002-11-20 12:21:53 +00:00
Michael Herder
a5e84985fa
Initial check-in of the artec_eplus48u backend
2002-11-20 12:21:20 +00:00
Henning Geinitz
e2e68a06d1
Minor adjustments, added headers, fixed \- bug.
2002-11-19 16:07:48 +00:00
Henning Geinitz
eb47cc6d78
Added quick start section. New structure/order. Added list of backends that
...
don't use sanei_usb. Added headers and fixed \- bug.
2002-11-19 15:30:39 +00:00
Henning Geinitz
c265786fb9
Added variable @PACKAGEVERSION@ for usage in manpages.
2002-11-17 12:32:04 +00:00
Henning Geinitz
bc885bb68c
Fixed wrong .TH headers.
2002-11-14 15:08:07 +00:00
Henning Geinitz
4ef48fd6e6
Added basic support for Plustek OpticPro 1248U (from Gerhard Jaeger
...
<gerhard@gjaeger.de>). Removed 50 and 1200 dpi from Lexmark X73. Backend
status is BETA now.
2002-11-13 17:45:24 +00:00
Ulrich Deiters
0a43a10869
upgraded Canon SCSI backend to version 1.10:
...
modified invocations of sanei_scsi_open() to avoid crashes with Mandrake Linux
added support of focus control for the FS2710S film scanner
2002-11-13 13:22:49 +00:00
Henning Geinitz
912c6f300d
Upload linear gamma table for Pro models if custom gamma is off instead of
...
uploading the composed gamma table. That avoids applying gamm twice. Minor man
page update.
2002-11-07 13:18:17 +00:00
Henning Geinitz
1eee8d286e
Changed option titles and descriptions to make them better readable. Added
...
translation markers for all options. Added German translation for backend
options. Updated manpage and .desc file concerning scanner status. Added
untested flag for Mustek ScanEpress A3 USB and Lexmark X73.
2002-11-07 12:50:19 +00:00
Henning Geinitz
7b590a0cde
Faster AFE calibration. Minor fixes. New version: 1.0-28.
2002-10-31 19:50:44 +00:00
Henning Geinitz
c896009ed6
Added some missing files to DISTFILES.
2002-10-25 15:55:23 +00:00
Henning Geinitz
25d2d31f09
Added for gt68xx backend.
2002-10-25 12:22:32 +00:00
Henning Geinitz
bc2a2f1d1c
Added documentation for gt68xx backend.
2002-10-25 12:19:34 +00:00
Henning Geinitz
ceecca3fab
Increased version to 1.0.9.
2002-10-23 14:03:22 +00:00
Henning Geinitz
ab23bef35c
Updated status of scanners.
2002-10-23 13:57:12 +00:00
Henning Geinitz
2f02a5fa77
Added Trust Easy Webscan 19200.
2002-10-19 10:51:47 +00:00
Frank Zago
e4a71ab4b5
Added inquiry for the AVEC 2412 (vm352a).
2002-10-18 23:59:41 +00:00
Gerhard Jaeger
eff5c115cb
Many small fixes and documentation update.
2002-10-15 18:02:53 +00:00
Henning Geinitz
23dd9c65ef
Added man page for sane-config.
2002-10-15 17:37:11 +00:00
Henning Geinitz
94976a8954
Backend behaviour is undefined if sane_init doesn't return
...
SANE_STATUS_GOOD. Added SANE_STATUS_INVAL to return codes for
sane_start. Description of sane_set_io_mode is more precise.
2002-10-15 08:36:40 +00:00
Oliver Schwartz
07e207ba40
SnapScan backend 1.4.17
2002-10-14 21:49:45 +00:00
Frank Zago
32c28abac4
Added entry for AVEC color 2412.
2002-10-09 17:54:21 +00:00
Henning Geinitz
5cb6875fdf
Added per-scanner status (from Karsten Festag <karsten.festag@gmx.de>).
2002-10-09 15:49:24 +00:00
Henning Geinitz
720642f97b
Removed comment about saned port not officially assigned.
2002-10-08 10:18:46 +00:00
Jochen Eisinger
5c746fdfd1
2002-10-04 Jochen Eisinger <jochen.eisinger@gmx.de>
...
* doc/descriptions/mustek_pp.desc: add :status tags to each
scanner
2002-10-04 18:27:13 +00:00
Karl Heinz Kremer
6a2a74a1cb
Added quotes around halftone options.
2002-10-04 17:12:02 +00:00
Matto Marjanovic
e1c7205510
2002-10-02 Matto Marjanovic <maddog@mir.com>
...
* doc/descriptions/microtek.desc: Updated version number.
* backend/microtek.c:
Fixed bug in sane_read() [had failed to set return length to zero
in non-STATUS_GOOD conditions].
Fixed bug in sane_set_io_mode() [had returned SANE_STATUS_UNSUPPORTED
if blocking mode was requested].
Bumped version up to 0.13.1.
2002-10-02 05:05:15 +00:00
Henning Geinitz
1a2ee3a4c7
Added paragraph about checking geometry (from TODO).
2002-10-01 16:19:11 +00:00
Henning Geinitz
ad578d91fa
Added explanation of bit order for 1 bit modes. Added comment about 1 bit
...
color modes. Fixed missing \code command. New version: 1.03.
2002-10-01 15:53:02 +00:00
Henning Geinitz
ec0b6057d2
Added new scanners. Updated status of supported scanners.
2002-10-01 15:30:19 +00:00
Oliver Rauch
e11c6074db
updated umax.desc
2002-09-30 16:33:35 +00:00
Matthew Duggan
284233e77e
* backend/canon_pp.c backend/canon_pp-dev.c backend/canon_pp-dev.h:
...
Finally fixed cancelling, which I broke some time ago in the quest
for speed. FB620P still doesn't abort nicely (firmware bug?).
* doc/sane-canon_pp.man: Added notes on FB620P problems.
* doc/descriptions/canon_pp.desc: Bumped version number.
2002-09-30 15:25:14 +00:00
Henning Geinitz
2958f7a844
Fixed bytes_per_line in 1 bit mode. Fixed 1 bit color three-pass mode
...
(grid). Changed bit order for 1 bit color to most significant bit is first
pixel.
2002-09-30 13:54:02 +00:00
Henning Geinitz
5ba6652c3e
Added "ScanExpress" for all models to avoid confusion with BearPaw models.
2002-09-29 20:45:56 +00:00
Karl Heinz Kremer
07329038f7
Updated man page and added Perfection 1660 and 2400 to desc file.
2002-09-29 16:28:15 +00:00
Gerhard Jaeger
ff6e86ef36
Major update to support Canon CIS scanner N670/676U and N650/656U
2002-09-28 11:31:53 +00:00
Andras Major
6e2c579cc1
coolscan2 update to 0.1.8
2002-09-28 07:59:11 +00:00
Frank Zago
6f74e1e76d
Added ":new :yes".
2002-09-27 00:13:57 +00:00
Henning Geinitz
61ecd58e11
Added paragraph about the different freeze types and a timetable.
2002-09-26 21:47:20 +00:00
Oliver Schwartz
97044ee3e3
SnapScan backend 1.4.16 (support for Acer/Benq 5000)
2002-09-26 20:09:24 +00:00
Henning Geinitz
4bea6c9423
Added MD9693, updated Artec E+ 48U (from Michael Herder <crapsite@gmx.net>).
2002-09-24 11:45:50 +00:00
Henning Geinitz
f89c529e99
Added some untested scanners. Updated Mustek entries.
2002-09-23 15:04:33 +00:00
Henning Geinitz
c3a39fe4d3
Changed status to beta and added URLs.
2002-09-23 10:16:54 +00:00
Peter Fales
4c2b21bdb9
Update email address
2002-09-22 13:45:32 +00:00
Frank Zago
8c0b86ca08
Added support for the LEOScan S3.
2002-09-20 02:59:18 +00:00
Henning Geinitz
21d4e19d22
Used "Hewlett-Packard" instead of "HP".
2002-09-18 20:43:10 +00:00
Henning Geinitz
9efe12ee8e
Updated Mustek information. Added Plustek OpticPro 1248U.
2002-09-17 20:56:36 +00:00
Oliver Schirrmeister
d387cfe539
added 3092 support
2002-09-17 11:19:07 +00:00
Matthew Duggan
9fef620345
* backend/canon_pp.c backend/canon_pp.h backend/canon_pp.conf:
...
Added init_mode option to conf file for faster starts.
* doc/sane-canon_pp.man : Added description of init_mode option.
2002-09-17 10:33:22 +00:00
Matthew Duggan
51a3075282
* backend/canon_pp-dev.c backend/canon_pp-dev.h backend/canon_pp-io.c
...
backend/canon_pp-io.h backend/canon_pp.c backend/canon_pp.h:
Fix init problem, add changes to facilitate configurable wakeup mode
(for faster starts on FB360P and FB620P).
* doc/sane-canon_pp.man doc/descriptions/canon_pp.desc: Updates
regarding FB310P and FB610P (rebadged Avisions)
2002-09-16 13:42:51 +00:00
Henning Geinitz
19694b6ce5
Added gt68xx information.
2002-09-16 12:49:46 +00:00
Oliver Schirrmeister
2b2453029f
added 3092 support
...
bug fixes
2002-09-16 12:19:56 +00:00
Henning Geinitz
adf9178abc
Added info about "unable to access minor data" messages.
2002-09-15 20:22:20 +00:00
Henning Geinitz
3aa93f6462
Updated -v description.
2002-09-15 18:24:49 +00:00
Karl Heinz Kremer
eace28556c
Fixed typo in sane-epson.man (PIP->PIO)
2002-09-15 18:06:07 +00:00
Oliver Rauch
b5c3730dcd
2002-09-13 Oliver Rauch <Oliver.Rauch@rauch-domain.de>
...
* backend/umax-scanner.c, backend/umax.conf
doc/descriptions/umax.desc:
added Linotype Hell SAPHIR3 as supported scanner
2002-09-13 14:27:32 +00:00
Henning Geinitz
4e41c03f8f
Added BeOS platform information. Updated Makefiles concerning READMEs.
2002-09-12 19:01:11 +00:00
Henning Geinitz
0703083319
Formatting updates. Added default values. Minor fixes.
2002-09-11 21:37:20 +00:00
Henning Geinitz
7a92f5dee6
Reordered options. Added info about ICC profiles, gamma4scanimage, and
...
--dont-scan option. Fixed example.
2002-09-11 21:36:26 +00:00
Oliver Rauch
2865131e36
2002-09-11 Oliver Rauch <Oliver.Rauch@rauch-domain.de>
...
* doc/descriptions/umax.desc: corrected some urls
2002-09-11 20:38:56 +00:00
Henning Geinitz
2887a1a24f
Added fb636u as unsupported. Added status information.
2002-09-11 19:02:29 +00:00
Peter Kirchgessner
a206fc7e0a
Added hints about USB-device names
2002-09-10 19:12:02 +00:00
Frank Zago
da6aa74692
Added threshold option for b&w.
2002-09-07 21:32:25 +00:00
Marcio Teixeira
1a62a5f0f0
Removed the "Incompatible" note for the UMAX2200US since it is supported by the "umax" backend.
2002-09-07 18:37:15 +00:00
Oliver Rauch
19b99d7197
updated umax.desc
2002-09-07 16:32:11 +00:00
Oliver Rauch
5e2087a43f
Update of umax.desc: PowerLook 2100XL stable
2002-09-07 16:13:42 +00:00
Oliver Rauch
08bc05d7cd
2002-09-07 Oliver Rauch <Oliver.Rauch@rauch-domain.de>
...
* backend/umax.c, umax.h, umax-scanner.c, umax.conf
doc/descriptions/umax.desc
Update to sane-umax build 36
2002-09-07 10:11:17 +00:00
Abel Deuring
9659512302
sanei/sanei_scci.c doc/sanei-scsi.man:
...
default timeout for SCSI commmands is now 120 seconds; added
the environment variable SANE_SCSICMD_TIMEOUT to override
the default value.
Abel
2002-09-04 22:13:44 +00:00
Matthew Duggan
45bf928a3c
* doc/sane-canon_pp.man doc/descriptions/canon_pp.desc:
...
Added FB320P to supported scanners after report of successful test.
Added FB310P and FB610P to desc as specifically not supported yet.
2002-09-03 15:20:49 +00:00
Henning Geinitz
51fdd3a670
Fixed typo.
2002-09-01 20:02:29 +00:00
Henning Geinitz
53c7791af4
Minor updates and fixes.
2002-09-01 19:52:46 +00:00