- backend/pixma_mp150.c:
Thanks to Vladimir Andreev patch, fix network scan for MP800R.
- doc/descriptions/pixma.desc and doc/sane-pixma.man:
. Documentation updates for latest MF5770 changes.
. Note: MF5770 grayscale mode appears to require some more work.
The backend description comes from the epkowa.desc file
with appropriate changes to suit epson2.desc. The usb
device list is now generated from this file, skipping
the :unsupported models. This means epson2 now detects
32 more models.
- use average instead of min/max for fine offset and gain
- rewrite supported resolution list as x and y arrays
- merge x and y resolution options into single option
- move scan params into two new structs, s->u and s->s
- sane_get_parameters() just returns values from s->u
- dont call wait_scanner() in object_position()
- dont call ssm_*() from option handler
- refactor sane_start()
- read_from_buffer() can workaround missing res, modes and cropping
- set most DR-2xxx machines to use the read_from_buffer workarounds
- set default threshold to 90
- add option for button #3 of some machines
- don't eject paper during init
- add DR-2010 quirks
- switch counter to HARD_SELECT, not SOFT
- Updated the list of supported devices (HP 5500C which is similar to
4570C, 5500C which is similar to 4500C) - only strings/comments, no
code was changed
- Updated backend version
- Updated man page
- Updated backend version
- Added HP ScanJet 4500C as completely supported
- Added HP ScanJet 5500C as untested
- HP ScanJet 4570C/5550C/5590/7650 marked as completely supported
* configure, configure.in: version 1.0.21cvs
* doc/releases.txt: minor updates for new build system
* doc/descriptions/canon_dr.desc, doc/descriptions/coolscan3.desc,
doc/descriptions/rts8891.desc, doc/descriptions/xerox_mfp.desc:
remove :new tag
with newer automake.
* backend/Makefile.am, tools/sane-config.in: Add missing
$GPHOTO2_LDFLAGS so library can be found.
* tools/Makefile.am: Add mising $SCSI_LIBS to sane-find-scanner.
doc/descriptions/fujitsu.desc: add S1500 usb ids and status
* backend/canon_dr.c: update credits
* doc/sane-fujitsu.man doc/sane-canon_dr.man: update version numbers,
dates, credits and known issues
* doc/saned.man: remove section about uncontrolled data port range
- return cmd status for reads of sensor options
* backend/canon_dr.c, doc/descriptions/canon_dr.desc: backend v26
- return cmd status for reads of sensor options
- allow rs to adjust read length for all bad status responses
- fix DR-2510C duplex deinterlacing code
- rewrite sane_read helpers to read until EOF
- update sane_start for scanners that dont use object_position
- dont call sanei_usb_clear_halt() if device is not open
- increase default buffer size to 4 megs
- set buffermode on by default
- hide modes and resolutions that DR-2510C lies about
- read_panel() logs front-end access to sensors instead of timing
- rewrite do_usb_cmd() to use remainder from RS info
* doc/desciptions/canon_dr.desc: backend v24, update DR-2510C comment
- rewrite all image data processing code
- handle more image interlacing formats
- re-enable binary mode on some scanners
- limit some machines to full-width scanning
* doc/desciptions/canon_dr.desc: v23, improved comments
- pad gray deinterlacing area for DR-2510C
- override tl_x and br_x for fixed width scanners
* doc/descriptions/canon_dr.desc: backend v19, update comments
- add byte-oriented duplex interlace code
- add RRGGBB color interlace code
- add basic support for DR-2580C, DR-2050C, DR-2080C, DR-2510C
- add more unknown setwindow bits
- add support for 16 byte status packets
- clean do_usb_cmd error handling (call reset more often)
- set status packet size from config file
- rewrite config file parsing to reset options after each scanner
- add config options for vendor, model, version
- dont call inquiry if those 3 options are set
- remove default config file from code
- add initial gray deinterlacing code for DR-2510C
- rename do_usb_reset to do_usb_clear
* doc/descriptions/canon_dr.desc: backend v18, update model status
* backend/canon_dr.conf.in: added better comments and new options
to sane-config missed during fix to stop using LIBS to link everything.
Add back in code to move LDFLAGS out of $GPHOTO2_LIBS and into
GPHOTO2_LDFLAGS.
issues, by Mattias Ellert.
* backend/fujitsu.c: backend v89, fi-4750 has no serial number support
* doc/descriptions/fujitsu.desc: backend v89, remove 'MAC/TWAIN' text
* doc/sane-fujitsu.man: backend v89
* backend/.cvsignore: ignore *.loT
Add tools/openbsd to distribution package.
* include/Makefile.am: include files should have been installed
under sane/ directory when converted to automake.
* doc/Makefile.am: Cleanup. Use automake's built in support to
install docs within subdirectories.
doc/Makefile to use automake. Main difference is that
no longer installs man pages for backends that are not
compiled. Moved install ownership of $top_srcdir docs
to $top_srcdir's Makefile.
* doc/descriptions/epjitsu.desc, doc/descriptions/fujitsu.desc: version
* doc/descriptions/umax1220u.desc: correct status of 1600U
* doc/descriptions/xerox_mfp.desc: status = new
Updated backends with EXTRA_* files to allow Makefile's
to always pass in BACKEND_NAME to be fixed to backend name
instead of filename; while still making sure that
SANE_DEBUG_${BACKEND}* exist as documented in man pages.
Add references to epson and epson2 man pages about
SANE_DEBUG_EPSONx_SCSI and _NET options.
Created an epson2 man page; based mostly on epson page.
Fix a few bugs with "all" and "uninstall" targets to work when
$(builddir) != $(srcdir). Added $(DESTDIR) to uninstall target.
Made $(distdir) related to current directory to match automake.
- round pixels_per_line down to arbitrary limits for fi-4990 & fi-4860
- fi-4860 returns random garbage to serial number queries
- initialize *info to 0 in sane_control_option()
* doc/descriptions/fujitsu.desc: backend v85, improve status/comments
* frontend/scanimage.c: initialize *info, fix buffer overwalk
- add all documented request sense codes to sense_handler()
- fix color jpeg (remove unneeded BGR to RGB swapping code)
- add macros for LUT data
* backend/canon_dr.conf.in: add DR-2080C usb ID
* doc/descriptions/canon_dr.desc: backend v10, add DR 3020
- rename read/send_counter to read/send_panel
- enable control panel during init
- add options for all buttons
- call TUR twice in wait_scanner(), even if first succeeds
- disable rif
- enable brightness/contrast/threshold options
* doc/descriptions/canon_dr.desc, doc/sane-canon_dr.man: backend v8
- jpeg support (size rounding and header overwrite)
- call object_position(load) between pages even if buffering is on
- use request sense info bytes on short scsi reads
- byte swap color BGR to RGB
- round image width down, not up
- round image height down to even # of lines
- always transfer even # of lines per block
- scsi and jpeg don't require reading extra lines to reach EOF
- rename buffer option to buffermode to avoid conflict with scanimage
- send ssm_do and ssm_df during sane_start
- improve sense_handler output
* doc/descriptions/canon_dr.desc: backend v7
doc/descriptions/canon_dr.desc: backend v5
- remove EOF ejection code
- add SSM and GSM commands
- add dropout, doublefeed, and jpeg compression options
- disable adf backside
- fix adf duplex
- read two extra lines (ignore errors) at end of image
- only send scan command at beginning of batch
- fix bug in hexdump with 0 length string
- DR-7580 support
backend/fujitsu.[ch], backend/fujitsu-scsi.h: backend v79
- add usb ids for several models
- print additional hardware capability bits
- detect front-side endorser
- disable endorser-side controls if only one side installed
- add quirks for fi-6x70
* backend/epjitsu.[ch], backend/epjitsu-cmd.h: backend v 13, 14 and 15:
- add working page-height control
- add working brightness, contrast and threshold controls
- add disabled threshold curve and geometry controls
- move initialization code to sane_get_devices, for hotplugging
- support S300 on USB power
- support S300 225x200 and 600x600 scans
- support for automatic paper length detection (parm.lines = -1)
- expose hardware buttons/sensors as options for S300
* doc/descriptions/epjitsu.desc: change S300 status to good
- add independent maximum area values for flatbed
- override said values for fi-4220C, fi-4220C2 and fi-5220C
* doc/descriptions/fujitsu.desc: bump version, add 2 untested scanners
- add fi-6130 usb ID
- correct overscan dimension calculation
- provide correct overscan size overrides for fi-5110C and fi-4x20C2
- fi-5750C can't handle 10 bit LUT via USB
- add halftone type and pattern options
- support M3097G with IPC and CMP options via modified VPD response
* doc/descriptions/fujitsu.desc, doc/sane-fujitsu.man: backend v68,
- manpage cleanup
use model and serial to build sane.name (idea from Ryan Duryea),
allow both serial_name and device_name to sane_open scanner,
simulate missing VPD data for M3097G, probe scanner for color
interlacing mode instead of hardcoding, other minor cleanups
doc/descriptions/hp3900.desc, doc/descriptions/hp5590.desc,
doc/descriptions/hpljm1005.desc, doc/descriptions/hs2p.desc:
remove 'new' tag from sane 1.0.19 backends
* doc/descriptions/fujitsu.desc, backend/fujitsu.conf.in:
add fi-5530C2 usb ID
* backend/cardscan.c: correct version number
* backend/epjitsu.conf.in: improved firmware directions
* backend/fujitsu.[ch]: update to backend v 1.0.61
- page code 32 is not color interlacing, rename to 'unknown'
- increase number of bytes in response buffer of init_ms()
- protect debug modification code in init_ms() if NDEBUG is set
- proper async sane_cancel support
- re-enable JPEG support
- replace s->img_count with s->side
- sane_get_parameters(): dont round up larger than current paper size
- sane_start() rewritten, shorter, more clear
- return values are SANE_Status, not int
- hide unused functions
Reorganize code by splitting the main() function into a series of functions.
Factorize common code between the old network code and the AF-indep code. There's now only one version of main().
- added: Pixma MP210, MP470, MP520, MP610
- added: MultiPASS MP710
- declared untested: MP140, MP220, MultiPASS MP740
- declared experimental and untested: MP970
Bugs and fixes
- multipage documents scan no more fails with non-ADF MPs
- IO Fail bug when scanning large pages e.g. with Xsane
- implement send_time message form MP710, MP730 family
- run indent -gnu on all pixma_* source files.