pimoroni-pico/micropython/modules/encoder
Phil Howard 6a3ba0d421 MicroPython: Shim MP_REGISTER_MODULE for >1.18 compat.
MicroPython has changed MP_REGISTER_MODULE to use only *two* args and now runs the preprocessing stage on files before running makemoduledefs.py.

This change avoids the build exploding, since the new regex matches the last two args as a single argument and generates a malformed module defs include.

The pattern here exploits the fact that 1.18 and below do not preprocess files, so *both* MP_REGISTER_MODULE lines are included in the source, but *only* the three arg version is matched by regex.

In >1.18 the files will be processed and the three arg version removed before makemoduledefs.py processes it.
2022-06-14 12:08:47 +01:00
..
README.md Encoder readme tweaks 2022-05-09 09:58:33 +01:00
encoder.c MicroPython: Shim MP_REGISTER_MODULE for >1.18 compat. 2022-06-14 12:08:47 +01:00
encoder.cpp MicroPython: Use placement new to alloc classes on GC_HEAP 2022-05-23 15:34:49 +01:00
encoder.h Encoder driver finalising 2022-04-25 12:28:42 +01:00
micropython.cmake Changed encoder folder and gave it a namespace 2022-04-22 16:23:45 +01:00

README.md

Encoders

The Encoder library lets you read incremental rotary encoders from a Raspberry Pi Pico or any other RP2040-based board, such as the Pimoroni Motor 2040.

This library offers an Encoder class that uses Programmable IO (PIO) hardware to read a single encoder, with support for up to 8 encoders.

Table of Content

Encoder

Getting Started

To start using encoders, you will need to first import the Encoder class.

from encoder import Encoder

To create your encoder, specify the PIO, PIO state-machine and GPIO pins it will be connected to, and pass them into Encoder. The example below shows the typical setup for a rotary encoder that has A, B and C pins.

PIN_A = 26    # The A channel pin
PIN_B = 28    # The B channel pin
PIN_C = 27    # The common pin
enc = Encoder(0, 0, (PIN_A, PIN_B), PIN_C)

If using a board such as Motor 2040 with its motor encoder support, then the encoder's GPIO pins can be assigned using one of the handy constants of motor2040.

from encoder import MMME_CPR
from motor import motor2040
enc = Encoder(0, 0, motor2040.ENCODER_A, counts_per_rev=MMME_CPR, count_microsteps=True)

As the above example shows, motor encoders often have a different number of counts per revolution than a traditional rotary encoder. For our MMME shims the MMME_CPR constant is provided. Also, as motor encoders lack the tactile steps of rotary encoders, their counting resolution can be increased by a factor of four by including each microstep.

Following either of the above setups gives you an Encoder class called enc that will monitor the state of the physical encoder.

From this point on the encoder can be read in several ways, depending on the intended application. These are covered in more detail in the following sections.

Count and Angle

The Encoder class keeps track of an encoder's current count, which gets increased or reduced as the physical encoder is turned. This count is read by calling .count().

The count can also be read back as either the number of .revolutions() of the encoder, or the angle in .degrees() or .radians(). These use the encoder's counts per revolution, which can either be specified when the object is created, or updated by calling .counts_per_rev(counts_per_rev).

Be aware that the count is stored as an integer, if it is continually increased or decreased it will eventually wrap at +2147483647 and -2147483648. This will cause a jump in the returned by .revolutions(), degrees() and .radians(), that will need handling by your code.

Count Delta

Often you are not interested in the exact count that the encoder is at, but rather if the count has changed since the last time you checked. This change can be read by calling .delta() at regular intervals. The returned value can then be used with a check in code, for the value being non-zero.

Step and Turn

If using a rotary encoder with a physical direction marker, it can be useful to know its position in the form of which step it is at and how many turns have occurred. The current step can be read by calling .step(), which returns a value from zero up to the encoder's counts_per_rev - 1. The number of turns can be read by calling .turn().

These functions differ from reading the .count() or .revolutions() by using seperate counters, and so avoid the wrapping issue that these functions experience.

Changing the Direction

The counting direction of an encoder can be changed either by providing direction=REVERSED_DIR when creating the Encoder object, or by calling .direction(REVERSED_DIR) at any time in code. The REVERSED_DIR constant comes from the pimoroni module. There is also a NORMAL_DIR constant, though this is the default.

Resetting to Zero

There are times where an encoder's count (and related values) need to be reset back to zero. This can be done by calling .zero().

Capture

There are times with encoders when you want to query multiple pieces of information from a single moment in time. Typically this would be done by reading the values up-front for use later, rather than reading them at the point they are needed in your code. Unfortunately even this offers no guarantee that the values were from a single moment, particularly when dealing with high speed encoders.

To support this usage the encoder class has a .capture() function, which returns a named tuple containing the encoder's:

count
delta
frequency
revolutions
degrees
radians
revolutions_delta
degrees_delta
radians_delta
revolutions_per_second
revolutions_per_minute
degrees_per_second
radians_per_second

Internally .capture() does the same up-front reading of values but does so more optimally within the underlying C++ driver. As an added bonus, it calculates encoder speeds too, by using the captured delta along with timing information returned by the PIO, more accurately than estimating a speed from the delta alone.

State

The raw state of an encoder's pins can be read using .state(), which returns pair of booleans for the A and B pins. This can be useful for visualising the signals of an encoder alongside its other values.

Function Reference

Here is the complete list of functions available on the Encoder class:

Encoder(pio, sm, pins, common_pin=PIN_UNUSED, direction=NORMAL_DIR, counts_per_rev=ROTARY_CPR, count_microsteps=False, freq_divider=1)
pins()
common_pin()
state()
count()
delta()
zero()
step()
turn()
revolutions()
degrees()
radians()
direction()
direction(direction)
counts_per_rev()
counts_per_rev(counts_per_rev)
capture()

Constants Reference

Here is the complete list of constants on the encoder module:

  • ROTARY_CPR = 24
  • MMME_CPR = 12

Here are useful constants from the pimoroni module:

  • NORMAL_DIR = 0
  • REVERSED_DIR = 1

PIO Limitations

The RP2040 features two PIOs with four state machines each. This places a hard limit on how many Encoders can be created of 8.

When creating an Encoder, in most cases you'll use 0 for PIO and 0 for PIO state-machine. You should change these though if you plan on running multiple encoders, or using encoders alongside something else that uses PIO, such as our Plasma library.