Richard Meadows
|
0d63bc3e06
|
[low-power-solar] add values for rx section
|
2016-08-07 11:58:01 +01:00 |
Richard Meadows
|
9f06e0889d
|
[low-power-solar] fix note on partslist
|
2016-04-18 18:28:27 +01:00 |
Richard Meadows
|
3889e526fb
|
[low-power-solar] update to partslist on ordering
|
2016-04-12 18:30:39 +01:00 |
Richard Meadows
|
a8ae29524c
|
[low-power-solar] finish of partslist
|
2016-04-10 17:43:04 +01:00 |
Richard Meadows
|
7f3aabbbb8
|
[low-power-solar] move markings to tStop layer
|
2016-03-30 15:41:55 +01:00 |
Richard Meadows
|
7eef1f2783
|
[low-power-solar] complete IC section of partslist, board order
|
2016-03-30 15:18:40 +01:00 |
Richard Meadows
|
b4a1c1945b
|
[low-power-solar] add low power solar. Includes solar and aprs amplifier
|
2016-03-26 20:17:05 +00:00 |
Richard Meadows
|
a572cc9ab6
|
[solar-breakout] replace LTC4071 -> LTC4070 as tested
|
2016-02-28 15:42:35 +00:00 |
Richard Meadows
|
98421a950b
|
[solar-breakout] add Q1 and Q2 to partslist
|
2016-02-22 17:43:24 +00:00 |
Richard Meadows
|
0ff3738d92
|
[solar-breakout] Complete parts list
|
2016-02-10 23:30:53 +00:00 |
Richard Meadows
|
72b5250126
|
[low-power] v0.987.3 Added pull-down on WDI
|
2016-01-18 12:07:08 +00:00 |
Richard Meadows
|
905c15eb8c
|
Added dimension
|
2015-12-25 11:51:26 +00:00 |
Richard Meadows
|
9ee4f34a35
|
Update solar breakout to yet another design
|
2015-12-24 13:32:45 +00:00 |
Richard Meadows
|
2082994732
|
[low-power] |v0.987.2|Low Power. Adjusted 100µF cap from 1210 to 1206
|
2015-12-23 12:13:19 +00:00 |
Richard Meadows
|
e603656497
|
[low-power] |v0.987.1|Low Power. Switch LF Clock to XOSC32K pin from GCLK_IO[0]. Allows feed to any GCLK. Bit-bang i2c instead
|
2015-12-22 11:40:50 +00:00 |
Richard Meadows
|
dbd1c20f08
|
[low-power] |v0.987.0|Low Power. Added 32kHz TCXO RC filters, replaced GPS LDO with MOSFET, remove IMU, vreg on b/out, update SE880 footprint, Watchdog, Radio, filter design
|
2015-12-21 17:27:56 +00:00 |
Richard Meadows
|
c2287442ee
|
Various bit rot on parts lists
|
2015-12-20 16:26:10 +00:00 |
Richard Meadows
|
9ea6762f70
|
Add existed flag to v0.986.8
|
2015-12-20 16:23:39 +00:00 |
Richard Meadows
|
7e5db9c36a
|
low-power-breakout] Fix some bit-rot
|
2015-12-13 14:32:36 +00:00 |
Richard Meadows
|
fc99b8eb32
|
[low-power] v0.986.8. Changed memory pads, GPS LDO and specified SAMD20E18A-MN with more flash and higher grade packaging
|
2015-12-01 18:01:46 +00:00 |
Richard Meadows
|
66cdfacc84
|
[low power] v0.986.7. Changed low power lf clock, added vreg on breakout for optional power testing
|
2015-11-22 20:25:35 +00:00 |
Richard Meadows
|
aa3e48174c
|
[low power] v0.986.6. Added LDO for GPS, LF TCXO for GPS
|
2015-11-22 16:05:49 +00:00 |
Richard Meadows
|
b72a496f9f
|
[low-power-side] v0.986.5 Added TS3006 low power clock
|
2015-11-17 21:45:24 +00:00 |
Richard Meadows
|
36b4b2a68a
|
low-power-side v0.986.4. Added LIS2D accelerometer. Optional
|
2015-11-10 21:10:42 +00:00 |
Richard Meadows
|
5df1f87459
|
Low Power. Added L0'-C0' tank in paralell. Might work, should test
|
2015-11-06 23:25:03 +00:00 |
Richard Meadows
|
0a3061fc64
|
[low-power] Rearranged matching section
Attempt to follow guidelines from silabs AN685 more closely
|
2015-11-04 23:15:47 +00:00 |
Richard Meadows
|
2170e43b59
|
[low-power-side] Added 10k i2c pull ups
v0.986.0 -> v0.986.1
|
2015-11-02 21:23:35 +00:00 |
Richard Meadows
|
2e334b832a
|
Added low-power breakout board for testing. 80x80mm
"Possibly the worst pcb design in the world"
|
2015-10-30 01:56:53 +00:00 |
Richard Meadows
|
56628b5735
|
[low-power-side] More work on board, vaguely complete. Added parts list
|
2015-10-28 21:31:13 +00:00 |
Richard Meadows
|
3495e08885
|
Add low-power SE880-based design with side mounted GPS antenna. v0.986.0
Will side mounted attenna cause problems with fading as the payload rotates?
TODO: Labels, couple of airwires, more testing on current hardware
|
2015-10-28 03:07:53 +00:00 |
Richard Meadows
|
32460ca389
|
Added hardware note for UBSEDS10-11
|
2015-10-28 03:01:08 +00:00 |
Richard Meadows
|
7e36fba32a
|
Fix hw README table
|
2015-10-09 17:42:30 +01:00 |
Richard Meadows
|
1b2160ab5a
|
Update partslist
|
2015-10-08 21:44:04 +01:00 |
Richard Meadows
|
4e24d6ce99
|
Hardware v0.985.3, reduce external thermistor holes to 0.5mm dia
|
2015-10-08 21:43:56 +01:00 |
Richard Meadows
|
f3ad018de1
|
main-solar_simple: Updated board logos and gps antenna soldermask on v0.985.2
|
2015-09-30 01:17:37 +01:00 |
Richard Meadows
|
ac04166b47
|
main-solar-simple: Fixed mouser part nr for wdt, fixed memory label on schematic
|
2015-09-29 21:51:57 +01:00 |
Richard Meadows
|
3003d0a953
|
Small board change..
|
2015-09-22 13:25:37 +01:00 |
Richard Meadows
|
8c92ad7604
|
Update part name U9
|
2015-09-22 13:25:19 +01:00 |
Richard Meadows
|
f3c82f23b5
|
Hardware V0.985.2, replaces BMP180 with MS5607
|
2015-09-21 12:20:23 +01:00 |
Richard Meadows
|
8c1395c9da
|
Added DNP/0Ω for when using battery only on main-solar-simple
|
2015-09-18 20:34:09 +01:00 |
Richard Meadows
|
6b92d70edd
|
Final board changes for solar/primary lithium AAA (v0.985.0)
|
2015-09-15 22:44:41 +01:00 |
Richard Meadows
|
d78180bebb
|
Added README describing hardware revisions
|
2015-09-15 19:30:01 +01:00 |
Richard Meadows
|
dd01d68b69
|
Parts list complete for main-solar-simple (v0.985)
|
2015-09-15 19:27:46 +01:00 |
Richard Meadows
|
f06145d96c
|
Updated schematic labels, fixed R11 value
|
2015-09-15 16:36:33 +01:00 |
Richard Meadows
|
6acc92f3df
|
Added new "simple" solar/primary design that just uses a LTC3105. Designed for use with a 1.5V primary lithium source.
Parts list is work in progress.
|
2015-09-15 16:25:22 +01:00 |
Richard Meadows
|
9c15bc4dde
|
More work on LTC3105 / primary 3V lithium board. Still work in progress
Needs solder pads and switch for 3V lithium battery.
|
2015-09-14 21:56:46 +01:00 |
Richard Meadows
|
946fca7e4c
|
Updated main tracker solar design to use a LTC3105 energy harvester for solar and a 3V primary lithium for backup. Work in Progress
|
2015-09-13 23:28:02 +01:00 |
Richard Meadows
|
f27cbf760f
|
Added vias though all the pads on the debug connector
|
2015-06-29 20:00:03 +01:00 |
Richard Meadows
|
a4b336c1b5
|
Updated various sercom definitions
|
2015-06-28 17:37:57 +01:00 |
Richard Meadows
|
1458b0faab
|
Fixed memory pin names to correspond with the datasheet
|
2015-06-28 16:49:14 +01:00 |