kopia lustrzana https://github.com/peterhinch/micropython-nano-gui
Fix bug in epd29.py.
rodzic
7be1073f48
commit
aff6d82e39
|
@ -22,7 +22,7 @@ import uasyncio as asyncio
|
||||||
from micropython import const
|
from micropython import const
|
||||||
from time import sleep_ms, sleep_us, ticks_ms, ticks_us, ticks_diff
|
from time import sleep_ms, sleep_us, ticks_ms, ticks_us, ticks_diff
|
||||||
|
|
||||||
_def asyncio_running():
|
def asyncio_running():
|
||||||
try:
|
try:
|
||||||
_ = asyncio.current_task()
|
_ = asyncio.current_task()
|
||||||
except:
|
except:
|
||||||
|
|
|
@ -57,5 +57,6 @@ async def test():
|
||||||
try:
|
try:
|
||||||
asyncio.run(test())
|
asyncio.run(test())
|
||||||
finally:
|
finally:
|
||||||
|
_ = asyncio.new_event_loop()
|
||||||
if epaper:
|
if epaper:
|
||||||
ssd.sleep()
|
ssd.sleep()
|
||||||
|
|
|
@ -0,0 +1,44 @@
|
||||||
|
# epd29_pico.py Config for Pico with 2.9" ePaper.
|
||||||
|
# Customise for your hardware config.
|
||||||
|
|
||||||
|
# Released under the MIT License (MIT). See LICENSE.
|
||||||
|
# Copyright (c) 2023 Peter Hinch
|
||||||
|
|
||||||
|
# Supports Adafruit 2.9" monochrome EPD with interface board connected to Pyboard.
|
||||||
|
# Interface breakout: https://www.adafruit.com/product/4224
|
||||||
|
# Display: https://www.adafruit.com/product/4262
|
||||||
|
|
||||||
|
# Demo of initialisation procedure designed to minimise risk of memory fail
|
||||||
|
# when instantiating the frame buffer. The aim is to do this as early as
|
||||||
|
# possible before importing other modules.
|
||||||
|
|
||||||
|
# WIRING. Adafruit schematic linked on the product web pagerefers to a different
|
||||||
|
# device. These are the pins on the physical board.
|
||||||
|
# Pico Breakout
|
||||||
|
# Vbus Vin (1)
|
||||||
|
# Gnd Gnd (3)
|
||||||
|
# 4 MISO (no need to connect)
|
||||||
|
# 6 SCK (4)
|
||||||
|
# 7 MOSI (6)
|
||||||
|
# 8 DC (8)
|
||||||
|
# 9 RST (10)
|
||||||
|
# 10 CS (7)
|
||||||
|
# 11 BUSY (11) (Low = Busy)
|
||||||
|
|
||||||
|
|
||||||
|
from machine import Pin, SPI
|
||||||
|
import gc
|
||||||
|
|
||||||
|
from drivers.epaper.epd29 import EPD as SSD
|
||||||
|
|
||||||
|
pdc = Pin(8, Pin.OUT, value=0)
|
||||||
|
prst = Pin(9, Pin.OUT, value=1)
|
||||||
|
pcs = Pin(10, Pin.OUT, value=1)
|
||||||
|
pbusy = Pin(11, Pin.IN)
|
||||||
|
|
||||||
|
# Baudrate. Adafruit use 1MHz at
|
||||||
|
# https://learn.adafruit.com/adafruit-eink-display-breakouts/circuitpython-code-2
|
||||||
|
# Datasheet P35 indicates up to 10MHz.
|
||||||
|
spi = SPI(0, sck=Pin(6), mosi=Pin(7), miso=Pin(4), baudrate=5_000_000)
|
||||||
|
gc.collect() # Precaution before instantiating framebuf
|
||||||
|
ssd = SSD(spi, pcs, pdc, prst, pbusy) # Create a display instance
|
Ładowanie…
Reference in New Issue