remove newline from logging statements in code. The LOG_* functions will now magically add it at the end.
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* bug #4184: fix config file loss due to filesystem write errors
* Use SafeFile for atomic file writing (with xor checksum readback)
* Write db.proto last because it could be the largest file on the FS (and less critical)
* Don't keep a tmp file around while writing db.proto (because too big to fit two files in the filesystem)
* generate a new critial fault if we encounter errors writing to flash
either CriticalErrorCode_FLASH_CORRUPTION_RECOVERABLE or CriticalErrorCode_FLASH_CORRUPTION_UNRECOVERABLE
(depending on if the second write attempt worked)
* reformat the filesystem if we detect it is corrupted (then rewrite our config files) (only on nrf52 - not sure
yet if we should bother on ESP32)
* If we have to format the FS, make sure to preserve the oem.proto if it exists
* add logLegacy() so old C code in libs can log via our logging
* move filesList() to a better location (used only in developer builds)
* Reformat with "trunk fmt" to match our coding conventions
* for #4395: don't use .exists() to before attempting file open
If a LFS filesystem is corrupted, .exists() can fail when a mere .open()
attempt would have succeeded. Therefore better to do the .open() in hopes that
we can read the file (in case we need to reformat to fix the FS).
(Seen and confirmed in stress testing)
* for #4395 more fixes, see below for details:
* check for LFS assertion failures during file operations (needs customized lfs_util.h to provide suitable hooks)
* Remove fsCheck() because checking filesystem by writing to it is very high risk, it makes likelyhood that we will
be able to read the config protobufs quite low.
* Update the LFS inside of adafruitnrf52 to 1.7.2 (from their old 1.6.1) to get the following fix:
97d8d5e96a
* use disable_adafruit_usb.py now that we are (temporarily?) using a forked adafruit lib
We need to reach inside the adafruit project and turn off USE_TINYUSB, just doing that
from platformio.ini is no longer sufficient.
Tested on a wio-sdk-wm1110 board (which is the only board that had this problem)
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Make STM compile again and update toolchain. The binary is too big for the flash. WIP
* Making progress with OSFS, still WIP
* more progress, still too big. Adding RAK3172 to the equasion
* Make STM compile again and update toolchain. The binary is too big for the flash. WIP
* Making progress with OSFS, still WIP
* more progress, still too big. Adding RAK3172 to the equasion
* still too big
* minimize build
* trunk fmt
* fix a couple of symbol clashes
* trunk fmt
* down to 101% with a release vs. debug build and omitting the flash strings
* fix compilation
* fix compilation once more
* update protobufs linkage
* - Toolchain updated
- Fixed macro error
* silence compiler warning
note: do something about this assert...
* new toolkit and fix Power.cpp
* STM32WL make it fit (#4330)
* Add option to exclude I2C parts
The I2C hals and related code uses a significant amount of flash space and aren't required for a basic node.
* Add option to disable Admin and NodeInfo modules
Disabled by default in minimal build. This saves a significant amount of flash
* Disable unused hals
These use up significant flash
* Add float support for printf for debugging
Makes serial look nice for debugging
* This breaks my build for some reason
* These build flags can save a bit of flash
* Don't disable NodeInfo and Admin modules in minimal build
They fit in flash
* Don't include printf float support by default
Only useful for debugging
---------
Co-authored-by: Adam Lawson <dev@goshawk22.uk>
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: Adam Lawson <dev@goshawk22.uk>
* add hwid for auto-detection
* fix: heltec-wireless-tracker USB serial
* T-Deck support
* trunk fmt
* set FRAMERATE to 1
* fix some defines
* trunk fmt
* corrected vendor link
* Wio-e5 / STM32WL wip
* Stubbing some FS stuff out
* Wio-e5 / STM32WL wip
* Stubbing some FS stuff out
* Wio-e5 / STM32WL wip
* Stubbing some FS stuff out
* Wio-e5 / STM32WL wip
* Stubbing some FS stuff out
* LittleFS compiles. Can't check with actual device.
* make cppcheck happy again
* Guard against accelerometer thread
* Missed a spot
* Upload via ST-LINK
* Derive MAC address from UID
* upload port
* Trunk it
* Guard it
* Maybe fix the cache error on startup.
* Latest RadioLib ref to fix SubGHZ
* revert nasty Sub-GHz Hack
* Boots and radio inits with RadioLib 6.0, LittleFS doesn't seem to work
---------
Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com>
Co-authored-by: GUVWAF <thijs@havinga.eu>
@mc-hamster seems to work pretty good for me, so I'll send a PR to you
for the dev-http branch.
I'll push out an android alpha build later today (once the build is
complete). Once this new device load is out in the field _future_
device builds will support updating spiffs from android. (i.e. device
loads older than 1.1.9 must be updated to 1.1.9 or later before spiffs
support is implemented on the device side - so some users might need to
update twice before the new spiffs contents will appear on their device)
Ben Meadors