mirror
/
meshtastic-firmware
kopia lustrzana https://github.com/meshtastic/firmware
1
0
Forkuj 1
Kod Zgłoszenia Packages Projekty Wydania Wiki Aktywność
7 691 Commity
24 Gałęzie
269 Tagi
4,2 GiB
Wykres commitów

538 Commity (471ee78a5e86fa8b5b61705d61606ce9216f7f06)

Autor SHA1 Wiadomość Data
Thomas Göttgens a1514b8b64
Enable (new) ADC and GPS capability. (#2792) 
* Enable (new) ADC and GPS capability.
* Make Picomputer a canon device and define ADC for new board revision
 2023-09-18 11:38:33 +02:00
Jonathan Bennett 8b82ae6fe3
refactor and avoid needless probe (#2799) 
* Use UINT32_MAX to indicate no configured GPS

* Refactor GPS to not probe if pins not defined

* Minor cleanups related to rework

* Use Named Constructor to clean up code

* Actually disable the GPS thread

* Don't actually disable the GPS thread

* Move doGPSPowerSave to GPS class

* Make sure to set GPS awake on triple-click

---------

Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
 2023-09-16 23:10:10 -05:00
Manuel d6d51bc3f4
T-Deck/T-Watch: enhancements/fixes (#2786) 
* T-Deck: enhancements/fixes

* trunk fmt

* T-Watch board update

---------

Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
 2023-09-10 06:54:25 -05:00
Ben Meadors 8255128eae Trunk finally spilled the beans about what it's upset about 2023-09-09 19:40:57 -05:00
Ric In New Mexico d7a98519f4
Update variant.h (#2778) 
* Update variant.h

Add second i2c channel on external connector for Station G1

* Create trunk-check.yml

---------

Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
 2023-09-09 19:37:35 -05:00
Ben Meadors dcdf9b64de
Ambient lighting (#2779) 
* This was already defined and throwing a ton of warnings

* Ambient lighting module feature

* Use local instance type
 2023-09-07 12:24:47 -05:00
tropho23 ffcb131171
GPS toggle for RAK4631 (patch 2 of 2) (#2764) 
* Added triple-press GPS toggle button changes

* Revert edits to extensions.json

* comma'd

* Update variant.h

Added the line:

// Define pin to enable GPS toggle (set GPIO to LOW) via user button triple press
#define PIN_GPS_EN 34 // GPS power enable pin

---------

Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: code8buster <communismisgreat@national.shitposting.agency>
 2023-09-04 13:17:01 -05:00
tropho23 bb1fe7cad3
GPS toggle for RAK4631 (patch 1 of 2) (#2763) 
* Added triple-press GPS toggle button changes

* Revert edits to extensions.json

* comma'd

* Update platformio.ini

Added line:

-DGPS_POWER_TOGGLE ; comment this line to disable triple press function on the user button to turn off gps entirely.

---------

Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: code8buster <communismisgreat@national.shitposting.agency>
 2023-09-04 13:16:39 -05:00
Mark Trevor Birss 00ffe73ebd
Heltec ESP32-C3 HT-CT62 support (#2741) 
* Add files via upload

* Update platformio.ini

* Update variant.h

* Update platformio.ini

* Switch to our new HW_MODEL

---------

Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: Ben Meadors <thebentern@tuta.io>
 2023-08-23 07:59:21 -05:00
Thomas Göttgens 762166495f
Merge branch 'master' into raspi-portduino 2023-08-17 10:06:34 +02:00
Thomas Göttgens 5d76771fab
Permanently Enable Canned Messages on T-Deck and Picomputer (#2728) 
* - Permanently Enable Canned Messages on T-Deck and Picomputer
- picomputer has a really dark TFT; switch color to white for better UX.

* well, you know... bullock...
 2023-08-16 15:07:22 -05:00
rcarteraz 18899fd168
Update variant.h (#2719) 
remove HAS_GPS 0 so users can add gps

Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
 2023-08-13 23:45:23 -05:00
Thomas Göttgens b5b66f43f2
Merge branch 'master' into raspi-portduino 2023-08-09 11:19:23 +02:00
mverch67 1d0ac2caf7 trunk fmt 2023-08-08 18:55:00 +02:00
mverch67 746d7268a2 fix picomputer 2023-08-08 18:51:11 +02:00
Manuel 9a7777dbdb
Merge branch 'master' into t-watch-fixes 2023-08-08 18:21:57 +02:00
mverch67 0fe99b0caa T-Watch fixes 2023-08-08 18:06:39 +02:00
Thomas Göttgens 4808a5c57f
also update other boards with those (#2691) 2023-08-07 23:22:17 +00:00
Thomas Göttgens d25c368985
Try enabling the secondary I2C bus on Heltec V3 (#2689) 
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
 2023-08-07 15:17:26 -05:00
Thomas Göttgens ed4e7a4cee
Change Target Name 2023-08-07 21:33:42 +02:00
Thomas Göttgens 402f8ba524 Let's see what this breaks... 2023-08-07 19:34:42 +02:00
Thomas Göttgens 8552cc44b9
Merge branch 'master' into picomputer-s3 2023-08-06 16:55:28 +02:00
Thomas Göttgens 684cce7640 trunk fmt 2023-08-06 16:53:37 +02:00
Thomas Göttgens 0aef8703b6 - use LovyanGFX for m5stack 
- update some comments
 2023-08-06 16:47:55 +02:00
Mark Trevor Birss 400b71c152 Update variant.h 2023-08-05 17:42:51 +02:00
Mark Trevor Birss b1f6ff1280 Update variant.h 2023-08-05 17:42:51 +02:00
Thomas Göttgens 1e71d346ae
Merge branch 'master' into raspi-portduino 2023-08-03 21:36:43 +02:00
Thomas Göttgens 4e54bec525
Force small fonts on Low DPI screens, no matter what the driver default uses. Up till now we assumed large fonts on E-Paper and TFT Screens. (#2677) 2023-08-03 06:58:19 -05:00
Ben Meadors 919b2d1e48
Merge branch 'master' into raspi-portduino 2023-07-31 19:00:00 -05:00
Thomas Göttgens 26338b8f2b
Merge branch 'master' into picomputer-s3 2023-07-31 22:27:24 +02:00
Manuel 502a6596a3
T deck: support keyboard, trackball and touchscreen (#2665) 
* add hwid for auto-detection

* fix: heltec-wireless-tracker USB serial

* T-Deck support

* trunk fmt

* set FRAMERATE to 1

* fix some defines

* trunk fmt

* corrected vendor link

* T-Deck: support keyboard, trackball & touch screen

* T-Watch add touchscreen defs, remove getTouch

* fix warnings

* getTouch uint16 -> int16

* fix touch x,y

* fix I2C port

* CannedMsgModule: use entire display height

* trunk fmt

* fix I2C issue for T-Watch

* allow dest selection in canned mode

* fix: allow dest selection in canned mode

* use tft.setBrightness() to poweroff display

* Increased t-watch framerate and added back haptic feedback

* add da ref

* Move to touched

* improved sensitivity and accuracy of touch events

* use double tap to send canned message

* fix warning

* trunk fmt

* Remove extra hapticFeedback()

---------

Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
 2023-07-30 07:51:26 -05:00
Neil Hao b9c9f0f865
nano-g2-ultra (#2660) 
* 'nano-g2-ultra'

* revert overcommit

* nano-g2-ultra-fmt

* revert overcommit

* revert overcommit

---------

Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
 2023-07-29 07:54:56 -05:00
GUVWAF ffcc1a0275
RP2040: Enable ExternalNotification and RangeTest Module, set randomSeed (#2664) 
* Enable ExternalNotification (and RangeTest) Module

* Set a random seed at boot
 2023-07-29 07:19:58 -05:00
Thomas Göttgens 171cca435e
Merge branch 'master' into raspi-portduino 2023-07-24 11:00:58 +02:00
Ben Meadors 470363d294
Update Hydra to use new TXEN->DIO2 macro (#2636) 2023-07-22 18:59:33 -05:00
Ben Meadors 0739bc0cea
T-Watch S3 Support (#2632) 
* T-Watch WIP

* Updates

* Temp

* Update screen spi bus and and backlight en

* Peripherals progress

* Fixes

* Fixes

* Updates

* DRV scaffolding

* Fixed touch-screen driver selection. WIP on DRV haptic feedback

* DRV2605 pmu channel

* Trunk

* Fixes and defaults

* Dropped an s

* Move PMU and turn off screen that way

* Add t-deck and t-watch-s3 to CI and cleanup

* More cleanup
 2023-07-22 09:26:54 -05:00
andrew-moroz 1c74479555
xiao-ble: add initial support for the Xiao BLE + Ebyte E22-900M30S (#2633) 
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
 2023-07-21 20:37:00 -05:00
Manuel 2486892e6d
Basic T-Deck support (#2630) 
* add hwid for auto-detection

* fix: heltec-wireless-tracker USB serial

* T-Deck support

* trunk fmt

* set FRAMERATE to 1

* fix some defines

* trunk fmt

* corrected vendor link
 2023-07-19 08:13:51 -05:00
Ben Meadors eb7025f1b1
Add Hydra specific target to define GPS EN pin and limit tx power (#2608) 
* Use DIO2 bridged to TXEN and remove TX/RXEN pin switching altogether

* Add Hydra specific target to limit tx power and define GPS EN

* Whoops
 2023-07-18 07:09:55 -05:00
tropho23 5995c7060d
Added triple-press GPS toggle button changes for select ESP32 devices (#2617) 
* Added triple-press GPS toggle button changes

* Revert edits to extensions.json

* comma'd

---------

Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: code8buster <communismisgreat@national.shitposting.agency>
 2023-07-17 18:55:40 -05:00
Manuel 541291cc70
resolve heltec-wireless-tracker serial issue (#2621) 
* add hwid for auto-detection

* fix: heltec-wireless-tracker USB serial
 2023-07-17 13:06:34 -05:00
Mark Trevor Birss 4306c32349
Update variant.h (#2620) 
Update M5Stack CoreInk enable GPS/BDS

Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
 2023-07-17 09:20:42 -05:00
Manuel ab32503601
Heltec-Tracker: GPS support (#2615) 
* Heltec-Tracker: GPS support

* trunk fmt

---------

Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
 2023-07-16 16:57:14 -05:00
Manuel c75965480f
Heltec-Tracker: TFT LCD support (#2612) 
* Heltec-Tracker: TFT LCD support

* trunk fmt

* backwards compatibility  with ST7735 devices

* trunk fmt
 2023-07-15 08:53:26 -05:00
Ben Meadors 4ace59fc18
Partial Heltec Wireless Paper and Wireless Tracker support (#2594) 
* WIP

* Comment

* WIP

* TFT_CTRL

* Update platformio.ini

update to current latest version available

* Update EInkDisplay2.cpp

Is the e-ink Display a DEPG0213BN ?

* Logging

* trunk fmt

---------

Co-authored-by: Mark Trevor Birss <markbirss@gmail.com>
 2023-07-14 16:12:30 -05:00
Ben Meadors de53280ffc
PIN_GPS_EN power toggling (#2592) 
* PIN_GPS_EN

* Remove extra digitalWrite

* GPS_POWER_TOGGLE macro enabled. Added WSLv3 too

* Update variant.h

* Update variant.h

* Fixed macro guard
 2023-07-08 21:01:00 -05:00
GUVWAF d8ad2b3f48
RPi Pico screen, CannedMessageModule (CardKB) and reboot support (#2595) 
* Make input_source case insensitive

* Implement reboot for RP2040

* Remove EXT_NOTFIFY_OUT as it conflicts with I2C and module is not supported

* RP2040 has screen, button and wire

* Add default I2C pins also for Pico W
 2023-07-08 11:32:36 -05:00
Dmitry Galenko 9c141919f6
Initial support for MonteOps's fixed hardware platform (#2582) 
* Initial support for MonteOps's fixed hardware platform

* Update platformio env config + cleanup

* Fix platformio build

* Fix platformio build

* Fix wrong definition logic for NCP5623

* Fix another wrong definition logic for NCP5623, it's not board feature

* Fix wrong definition logic for NCP5623 in External Notification code, it's not board feature

* We need for CI magic here

* Another fix related to NCP5623

* Fix cosmetic issue with redifined variable

* Fix typo

* Cleanup and update defs for HW1

* Fix OEM RAK4631

* Fix AQ sensor reading

* Fix AQ sensor reading (better variant)

* Fix build for other nRF52 devices

* Replace HAS_EINK_RAK to RAK_4631
 2023-07-03 09:34:32 -05:00
Thomas Göttgens e878f55ed3
Merge branch 'master' into raspi-portduino 2023-06-27 18:13:24 +02:00
Thomas Göttgens bfc567ad89 Add variant an plumbing for #2468 2023-06-27 18:11:58 +02:00
Ben Meadors e677a02273
Map built-in LED on RAK-11310 (#2568) 2023-06-21 12:11:42 -05:00
Ben Meadors f71869215d
Set pin for RAK-12039 to allow I2C auto-detect (#2555) 
* SET pin for RAK-12039 and put back macaddr for now

* Guard against epaper RAK variant

* Update main.cpp

* Add these back
 2023-06-09 05:58:58 -05:00
Ben Meadors a491ceefcd
Wio-e5 wip (#2265) 
* Wio-e5 / STM32WL wip

* Stubbing some FS stuff out

* Wio-e5 / STM32WL wip

* Stubbing some FS stuff out

* Wio-e5 / STM32WL wip

* Stubbing some FS stuff out

* Wio-e5 / STM32WL wip

* Stubbing some FS stuff out

* LittleFS compiles. Can't check with actual device.

* make cppcheck happy again

* Guard against accelerometer thread

* Missed a spot

* Upload via ST-LINK

* Derive MAC address from UID

* upload port

* Trunk it

* Guard it

* Maybe fix the cache error on startup.

* Latest RadioLib ref to fix SubGHZ

* revert nasty Sub-GHz Hack

* Boots and radio inits with RadioLib 6.0, LittleFS doesn't seem to work

---------

Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com>
Co-authored-by: GUVWAF <thijs@havinga.eu>
 2023-06-01 07:14:55 -05:00
GUVWAF e699427bfc
RP2040: Enable telemetry and update HW models (#2525) 2023-05-28 10:30:54 -05:00
GUVWAF 35ee12cb4c
RP2040: Use Pico SDK USB stack instead of TinyUSB (#2523) 
Seems to fix freeze, serial output still stops after a while
 2023-05-27 19:22:26 -05:00
code8buster 7475c8647c
2.5dB could be a more appropriate attenuation for heltec ADCs (#2511) 
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
 2023-05-26 06:16:40 -05:00
Ben Meadors 2728e86aab No longer are you extras, my friends 2023-05-24 07:08:22 -05:00
Thomas Göttgens 1dfa8f2d9e
RAK11310 (#2299) 
* POC. Board definition JSON upcoming. Generic for now

* side-effect: RP2040 is building again.

* WIP Pico Targets

* current state of affairs

* ahem

* POC. Board definition JSON upcoming. Generic for now

* side-effect: RP2040 is building again.

* WIP Pico Targets

* current state of affairs

* ahem

* fmt

* update toolkit and fmt

* Add built in LED pin

* Use arduino pins

* init SPI bus on right pins.

* Use SPI1 and control chip select manually

* Use macro define for SPI selection. This needs to be defined in the ini file since portduino needs it inside the framework source

* Remove manual CS; works when not using setCS()

* Remove whoopsie debug line

* we are not ARDUINO_AVR_NANO_EVERY any more

* fix rp2040 compilation

* fix RadioLibHAL

* Use new arduino-pico core

* Use cortex-m0plus for BSEC2 library

* Forgot RAK11310 target for BSEC2 library

* That branch was merged

* RAK11310 is working too

---------

Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: GUVWAF <thijs@havinga.eu>
 2023-05-23 16:19:36 -05:00
Ben Meadors 9bee35118f
Merge branch 'master' into raspi-portduino 2023-05-18 06:47:56 -05:00
code8buster 9878ff3836 Tryfix datatype errors 2023-05-16 21:46:55 +02:00
code8buster 3219ad33ef Add ADC channels to esp variants, plug code back in to make sure other archs work 2023-05-16 21:46:55 +02:00
code8buster d11bcda292 Implementing a calibrated ESP32 ADC reading 2023-05-16 21:46:55 +02:00
Ben Meadors f7e1f4cea6 Fix hydra (for real this time) 2023-05-11 19:56:55 -05:00
Ben Meadors 75504793e8 Skip setting dio2 as rf switch altogether if txen is defined 2023-05-11 06:52:27 -05:00
Thomas Göttgens 80f029aa32
Merge branch 'master' into raspi-portduino 2023-05-10 17:13:32 +02:00
Thomas Göttgens 70dc13a998 use BSEC2 only 2023-05-10 14:14:48 +02:00
Thomas Göttgens 9841d49fb8
Merge branch 'master' into BSEC2 2023-05-10 13:31:46 +02:00
rcarteraz 0e15d6a5c2
Update Heltec WSL variant.h to add I2C definitions. (#2475) 2023-05-09 19:30:43 -05:00
Thomas Göttgens 6963e43e9f Platformio 6.1.7 doesn't like dots in env names any more. 2023-05-08 20:28:11 +02:00
Thomas Göttgens b75aa79da5
Merge branch 'master' into raspi-portduino 2023-05-08 10:32:36 +02:00
Ben Meadors 09d48f659e
RAK14001 RGB LED support (#2464) 
* WIP

* WIP

* Moved it

* More random strobey behavior

* Guard to RAK4630 devices for now

* Oops

* Ship it
 2023-05-06 07:17:40 -05:00
Thomas Göttgens 10f41e376c use BSEC2 for ESP32-C3 2023-05-05 18:09:06 +02:00
Manuel Verch 7c9d0a022a fix AI C3 DevKit-M configuration 2023-05-05 09:39:22 +02:00
Ben Meadors a6385a522d
Disable TX/RX EN in favor of power EN over TX_EN (#2456) 
* Disable TX/RX EN in favor of power EN over TX_EN

* Oops
 2023-05-03 06:24:09 -05:00
Mark Trevor Birss a27d354364
Add board - BPI PicoW ESP32-S3 SX1262 (#2450) 
* Add files via upload

* Add files via upload
 2023-05-01 07:12:00 -05:00
Thomas Göttgens 85818b8dfd
Merge branch 'master' into raspi-portduino 2023-04-21 16:50:48 +02:00
Thomas Göttgens 10fac072bb move codec2 repo to org 2023-04-12 14:39:25 +02:00
Thomas Göttgens 14080d4667
Merge branch 'master' into raspi-portduino 2023-04-02 21:24:49 +02:00
Vladislav Osmanov 6bf538e26f `EXT_PWR_DETECT` pin to detect external power source for boards without the power management chip 2023-04-02 11:35:25 +02:00
Thomas Göttgens 82ba59765c trunk it baby 2023-03-29 13:41:45 +02:00
Mark Trevor Birss 7930aa1635 Update platformio.ini 2023-03-29 13:41:45 +02:00
Mark Trevor Birss c55751964e Update platformio.ini 2023-03-29 13:41:45 +02:00
Mark Trevor Birss b9b1cce6a5 Update platformio.ini 2023-03-29 13:41:45 +02:00
Mark Trevor Birss 044ef75fef Update platformio.ini 2023-03-29 13:41:45 +02:00
Mark Trevor Birss 9f940139a0 Update platformio.ini 2023-03-29 13:41:45 +02:00
Mark Trevor Birss 790df42987 Add files via upload 2023-03-29 13:41:45 +02:00
Thomas Göttgens 8a806efb95
Merge branch 'master' into raspi-portduino 2023-03-27 15:30:05 +02:00
Thomas Göttgens 2c259b8464 Add Power Restraint for 1280 PA Model 
Add Debug Print for all module parameters
Add RX/TX Switch to 1280
 2023-03-24 16:57:30 +01:00
Thomas Göttgens 75db8c2d2e the target starts up and works for a few seconds before crashing. Good enough for others to continue the work :-) 2023-03-21 16:24:24 +01:00
Ben Meadors 5e779bfb33
Merge branch 'master' into raspi-portduino 2023-03-16 14:43:23 -05:00
andrekir c9686d2f62 remove `PIN_EINK_EN` from RAK4631 variants 2023-03-12 19:29:12 +01:00
Andre K 634251834f fix rak4631_epaper PIN_EINK_EN 
revert 088ab106dd
 2023-03-12 19:29:12 +01:00
Ben Meadors e737a22120
Platform updates (#2340) 
* 6.1.0

* Update libs

* Update nrf52 while we're at it

* Remove temporary heltec platform packages

* Update install scripts to flash s3 ota partition bin
 2023-03-09 12:45:38 -06:00
A. Rager e6d69e2b67
Refactor i2cScan.h To Handle 2 Bus (#2337) 
* Break i2cScan out into a set of classes for scanning i2c

* refactor i2cscan addresses to be structs that allow addressing by port + address

* build whoopsies

* trunk fmt

* trunk fmt

* lost some build fixes from the merge

* more cleaning for build safety, RTC behavior
 2023-03-08 21:13:46 -06:00
Thomas Göttgens 267db05d69 - G1 Explorer use correct display controller 
- adhere UA font in modules
 2023-03-08 17:12:25 +01:00
Thomas Göttgens 4a0dfb5401 T3S3-1.1 SX1276 config (and cosmetic change for SX1280 in PA mode) 2023-03-04 18:39:19 +01:00
Thomas Göttgens 498964e04e
Merge branch 'master' into raspi-portduino 2023-03-04 17:24:37 +01:00
A. Rager 214feb1f21
Add Hardware: BetaFPV 900 Nano TX (#2249) 
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
 2023-03-01 08:36:25 -06:00
Manuel 9008c75517
Fixed: Tlora-t3s3-v1 SX1262 firmware reboots continuously (#2308) (#2315) 2023-02-28 07:45:10 -06:00
Thomas Göttgens 7d0bea267a
Merge branch 'master' into raspi-portduino 2023-02-22 10:08:20 +01:00
GUVWAF 95bbcd2cb7
Use LORA_DIO1 as RadioLib GPIO for SX127x chips (#2290) 
* When channel is active, first try receiving that packet
Afterwards we'll try transmitting again

* Remove setStandby in startSend
Already done in isChannelActive()

* Set LORA_DIO1 as RadioLib GPIO for SX127x

* LORA_DIO1 for Heltec v1, overlaps with GPS_TX
Set to RADIOLIB_NC for now

* If receive was not successful, startReceive doesn't trigger the interrupt
So we have to go back to transmitting anyway

---------

Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
 2023-02-20 07:40:44 -06:00
neil b33632f21a 'nano-g1-explorer' 2023-02-18 04:49:37 +08:00
Thomas Göttgens ed1aa9ddb0
Merge branch 'master' into raspi-portduino 2023-02-17 12:34:00 +01:00
Ben Meadors 09f2ea8938 Portduino isn't extra. It's extra special 2023-02-10 07:47:43 -06:00
Thomas Göttgens 83e309f3bf label boards as secondary to split the core firmware archive by support level. 
Ref: https://docs.platformio.org/en/latest/scripting/examples/platformio_ini_custom_options.html
 2023-02-10 01:35:25 +01:00
GUVWAF a5b99ee5d5 Try other location 2023-02-07 20:05:40 +01:00
GUVWAF 4a0c341438 Make Portduino build again 2023-02-07 19:40:15 +01:00
Ben Meadors 9522d4d2f5 Make a pie? 2023-02-07 07:17:32 -06:00
Thomas Göttgens 472c43aace Merge remote-tracking branch 'remotes/origin/master' into raspi-portduino 2023-02-02 10:49:45 +01:00
Ben Meadors cb3d5a5748 Comment about external PA module boards 2023-01-25 15:48:42 -06:00
Ben Meadors f1fd41a378 Add to Eink target as well 2023-01-25 11:48:11 -06:00
Ben Meadors ca91447c0e For science! 2023-01-25 10:10:09 -06:00
Ben Meadors 2c1b7840c5 Make this pr great again 2023-01-23 09:22:40 +01:00
Thomas Göttgens e9acf413fb After thoroughly reading schematics and documentation, i conclude that this is theoretically the right definition for this hookup. 2023-01-23 09:22:40 +01:00
Ben Meadors 266c61065d I swear I did this before you butthole 2023-01-21 19:51:24 -06:00
Ben Meadors e2e7658789 w/e 2023-01-21 19:24:33 -06:00
Thomas Göttgens 51b2c431d9 trunk roundhouse kick 2023-01-21 21:23:24 +01:00
Ben Meadors 7e27729dae Remove HAS_GPS for WSLv3 2023-01-15 08:24:20 -06:00
Thomas Göttgens 5fd00b2538 - make a template class for API Server 
- Skip a lot of duplicate code
- add a hexDump output - might come in handy
- refactor directory names
- remove unused debugOut that was generating template errors
 2023-01-09 17:03:52 +01:00
Thomas Göttgens 49172e416e
Merge pull request #2108 from markbirss/develop 
Add initial support for BETAFPV ELRS Micro TX Module 2.4G with ESP32 CPU
 2023-01-07 22:50:04 +01:00
Mark Trevor Birss 4d7402839e
Update platformio.ini 2023-01-07 16:00:27 +02:00
Mark Trevor Birss c98dc4cae0
Update variant.h 2023-01-07 13:48:35 +02:00
Mark Trevor Birss f21212dd3e
Update platformio.ini 2023-01-07 13:23:33 +02:00
Mark Trevor Birss 0e0ccad489
Update variant.h 2023-01-07 13:22:32 +02:00
Mark Trevor Birss 9f1c77da76
Create variant.h 2023-01-07 13:01:14 +02:00
Mark Trevor Birss 7c1c49b8ab
Create platformio.ini 2023-01-07 13:00:50 +02:00
Ben Meadors f4099261df Hydra gps troubleshooting 2023-01-06 15:04:11 -06:00
Thomas Göttgens 8c20fe5ec4 Start working on RF95 attached to Raspberry Pi 2022-12-30 21:44:51 +01:00
Thomas Göttgens 94cb100e3f Master to Develop 2022-12-28 15:30:23 +01:00
Thomas Göttgens e25d05689b Updates to external notification and radiolib for SX128x. Rip out Godmode again for these 2022-12-28 14:57:40 +01:00
Thomas Göttgens 430908f5d6 TLORA_T3_S3 2022-12-28 13:56:56 +01:00
Ben Meadors 28b954017f Copy pasta 2022-12-22 14:55:32 +01:00
Ben Meadors 16d826d6c7 Move to upstream espressif arduino 2022-12-22 14:55:32 +01:00
Thomas Göttgens d566457f0c Merge remote-tracking branch 'remotes/origin/master' into develop 2022-12-18 14:07:20 +01:00
Thomas Göttgens c577e09183
Merge branch 'develop' into gps-toggle-final 2022-12-16 20:58:53 +01:00
Thomas Göttgens 72f1416b30 add variant comment about radiolib 2022-12-16 20:21:56 +01:00
code8buster f2229e6977 Decrease click time window to avoid spurious double press detections while cycling windows quickly, build power toggle by default 2022-12-15 11:08:37 -05:00
Mark Trevor Birss 088ab106dd
Update variant.h 2022-12-14 17:57:02 +02:00
Mark Trevor Birss 110c3f619a
Update variant.h 2022-12-14 17:56:44 +02:00
ghostop14 59ec7f31ab Enable GPS capabilities on heltec V3 2022-12-13 12:31:39 -05:00
Thomas Göttgens 5fbc630061 add IO7 to RAK pinouts - only comments changed 2022-12-11 21:17:46 +01:00
code8buster 911083c49d Adds a flag to turn the GPS power rail off entirely on tbeam 2022-12-04 01:57:00 -05:00
Thomas Göttgens bba6bf387e hopefully fix compilation errors 2022-11-29 14:35:46 +01:00
Thomas Göttgens 4d32f7c5ad WIP: audio module still does not work, but enabled for all regions where audio is permitted. 2022-11-29 11:22:18 +01:00
Thomas Göttgens c7681cb24d update board definition, update copy/paste errors, fix SX1280. 2022-11-27 14:03:50 +01:00
Ben Meadors 47a47f1e69
Merge branch 'master' into develop 2022-11-26 08:18:35 -06:00
Ben Meadors 84a9d95b1f
Merge branch 'master' into MESSAGES 2022-11-26 06:43:52 -06:00
Ihor Nehrutsa 6507683909 Squashed commit of the following: 
commit c8d1bcf04fae5f7ac5b639ddd15a738045014c95
Author: Ihor Nehrutsa <Ihor.Nehrutsa@gmail.com>
Date:   Fri Nov 25 15:11:18 2022 +0200

    Revert "variants\tbeam\variant.h: Use LORA_CS instead of RF95_NSS"

    This reverts commit 8d225ced9c.

commit 1c37097448393ea9364c2b9bf10522802c61d5c4
Author: Ihor Nehrutsa <Ihor.Nehrutsa@gmail.com>
Date:   Fri Nov 25 15:04:09 2022 +0200

    Some little debugs added

commit f1b55e11af
Author: Ihor Nehrutsa <Ihor.Nehrutsa@gmail.com>
Date:   Wed Nov 23 15:24:58 2022 +0200

    Update variant.h

commit 8d225ced9c
Author: Ihor Nehrutsa <Ihor.Nehrutsa@gmail.com>
Date:   Wed Nov 23 13:06:49 2022 +0200

    variants\tbeam\variant.h: Use LORA_CS instead of RF95_NSS
 2022-11-25 15:17:24 +02:00
Thomas Göttgens 025d2264a2 m5stack runs with native tone support now. 2022-11-24 10:44:43 +01:00
Thomas Göttgens 5f8267c956 use the buzzer for external notification module 2022-11-24 10:11:42 +01:00
Mark Trevor Birss b3c396683e
Update platformio.ini 2022-11-23 21:25:19 +02:00
Mark Trevor Birss f08874dd37
Update platformio.ini 2022-11-23 21:24:34 +02:00
Mark Trevor Birss 648054da9b
Add files via upload 2022-11-23 21:19:20 +02:00
Ben Meadors 00bc762bf1
Merge branch 'master' into develop 2022-11-21 09:38:46 -06:00
Thomas Göttgens 3b2b0bdc97
fix TLora V1 Boards Display Init 2022-11-21 15:50:47 +01:00
Ben Meadors 53cd6bdf15
Merge branch 'master' into develop 2022-11-21 07:35:46 -06:00
Ben Meadors b23c364fc0 Test it this way 2022-11-15 16:22:53 -06:00
Thomas Göttgens 5bfc58ed64 testing issues with RAK11200/13300 2022-11-15 21:55:27 +01:00
Thomas Göttgens b5ebfa9cc3 Portduino WIP 2022-11-15 07:59:01 +01:00
Thomas Göttgens 79eff42c3c Fix and Break radiolib 2022-11-14 10:53:16 +01:00
Thomas Göttgens 50a301899e start to sort radiolib out. If we have macros, use them! :-) 
Also we need Godmode for the SX1280 for now, hopefully can revert to more sane operation.
 2022-11-14 09:49:50 +01:00
Ben Meadors 6e856efd0e
Merge branch 'master' into develop 2022-11-13 14:45:48 -06:00
Ben Meadors 8d4c526d16 Add Heltec Wireless Stick Lite V3 support 2022-11-13 13:28:02 -06:00
Ben Meadors 33cd5ce6c1 Cleanup 2022-11-13 09:48:38 -06:00
Ben Meadors f22c2e768e Reorder 2022-11-13 09:47:55 -06:00
Ben Meadors 3d7dea0606 Added support for Heltec V3 2022-11-13 09:45:16 -06:00
Thomas Göttgens 7a67388a97 Merge branch 'master' of github.com:meshtastic/firmware into develop 2022-11-12 14:34:51 +01:00
lewishe dff6eeb90e Merge branch 'master' of https://github.com/lewisxhe/Meshtastic-device 2022-11-12 15:16:54 +08:00
lewishe b68a026627 Update tbeam-s3 variant mapping 2022-11-12 14:39:42 +08:00
Thomas Göttgens a6ea5496b4 Fixed DIO Pin mapping. SX1280 is working 2022-11-10 23:26:31 +01:00
Thomas Göttgens de0954f307 switch to upstream Ethernet lib 2022-11-10 09:35:56 +01:00
Ben Meadors 3562d34555 Remove flag 2022-11-06 18:22:52 +01:00
Ben Meadors 3ca6f645d4 Portduino build flags 2022-11-06 18:22:52 +01:00
Ben Meadors 950d5defda
Master to develop (resolves conflicts) (#1903) 
* Rearranging deck chairs, 900M22S working, 30S not

* We do have wire, just not where it's expected

* Put more of the module specific pins in their blocks

* tryfix compile with NO_SCREEN

* Portduino only: don't continue to try rebooting (#1887)

Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com>

* Support for TLORA 2.1-1.8

* Don't allow arbitrary channel name for admin (#1886)

Co-authored-by: Ben Meadors <benmmeadors@gmail.com>

* Experimental DIY nrf52840 feather support (#1884)

* Experimental DIY nrf52840 feather support

* Fix target

* sx1262 wiring

* Remove lib

* Don't consider Response as ACK for FloodingRouter (#1885)

Co-authored-by: Ben Meadors <benmmeadors@gmail.com>

* Fix feather diy (#1892)

* Fix variant

* Fix feather diy target

* [modules][external notifications] allow select channel to listen to

* Fix feather diy pin mapping (#1894)

Thanks to @markbirss

* [create-pull-request] automated change

* Override Screen Autodtect

* Maybe fix crash of this board.

* Fixes reset loop with new espressif32 platform on tlora-v2

 Sending a pulse to the OLED_RESET Pin 16 results in a reset loop using recent version of the espressif32 platform.

* Experiment with self hosted action runner

* Fix MQTT on ETH

* revert the tryfix

* Cheating

* Cleanup artifacts older than 1 month

* Update cleanup_artifacts.yml

* Update cleanup_artifacts.yml

* Update cleanup_artifacts.yml

* Delete cleanup_artifacts.yml

* fix: use RF95_IRQ for wakeup source in doLightSleep (#1899)

Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com>
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>

* Update protos

* Update protos

Co-authored-by: code8buster <communismisgreat@national.shitposting.agency>
Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com>
Co-authored-by: GUVWAF <78759985+GUVWAF@users.noreply.github.com>
Co-authored-by: Mykhailo Lesyk <m@lesyk.org>
Co-authored-by: Mykhailo Lesyk <lesykm@users.noreply.github.com>
Co-authored-by: caveman99 <caveman99@users.noreply.github.com>
Co-authored-by: he-leon <he-leon@users.noreply.github.com>
Co-authored-by: Lars Weber <weber@weber-software.com>
 2022-11-05 09:28:41 -05:00
Thomas Göttgens 09cdc20440 manual merge of changes from Master 2022-11-04 19:56:44 +01:00
Thomas Göttgens 09ddde177c codec2 Audio Support for SX1280 (untested) 2022-11-02 18:23:41 +01:00
Ben Meadors ef18b173cd Experimental DIY nrf52840 feather support (#1884) 
* Experimental DIY nrf52840 feather support

* Fix target

* sx1262 wiring

* Remove lib
 2022-11-02 18:19:09 +01:00
Thomas Göttgens 3e82cd7dd4 Support for TLORA 2.1-1.8 2022-11-02 18:19:09 +01:00
code8buster 0ce018cf97 Put more of the module specific pins in their blocks 2022-11-02 18:19:09 +01:00
code8buster 15a8710e69 We do have wire, just not where it's expected 2022-11-02 18:19:09 +01:00
code8buster cae75dcb6d Rearranging deck chairs, 900M22S working, 30S not 2022-11-02 18:19:09 +01:00
code8buster 1f9db0a8fe
Disaster.radio dev board support update (#1873) 
* Bringing changes from 1.2-legacy over to the new structure in 1.3/2.0

* Add meshtastic-dr-dev to CI artifact workflow
 2022-10-29 16:37:27 -05:00
Thomas Göttgens a1256818d9 update library location 2022-10-26 18:25:31 +02:00
Thomas Göttgens a66538fe55 MQTT is working over ethernet 2022-10-26 00:07:02 +02:00
Thomas Göttgens aab52f1e8d Merge branch 'master' of github.com:meshtastic/Meshtastic-device 2022-10-23 16:41:04 +02:00
Mykhailo Lesyk 41267a42f7
[rak4630] enable 3.3v periphery before scan for i2c devices (#1847) 
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
 2022-10-22 19:55:34 -05:00
Thomas Göttgens 103c82bc2c only build on vanilla RAK4631 for now. 2022-10-22 16:42:36 +02:00
Thomas Göttgens f3fee5f4fb first murmurs of ethernet support 2022-10-22 16:29:50 +02:00
Ben Meadors 1fc3c0af70
Update variant.h (#1814) 2022-10-17 08:07:18 -05:00
Thomas Göttgens 994e396c00 update Raspberry Pico Framework 2022-10-13 13:57:17 +02:00
Thomas Göttgens d4e65d8607 1.0.1 RTC LIB is released on PIO Registry 2022-10-08 11:09:16 +02:00
Thomas Göttgens 2d4bfe183c Merge branch 'master' of github.com:meshtastic/Meshtastic-device 2022-10-07 16:42:29 +02:00
lewis he 004f6fa4d6
Add t-beam-s3-core onboard device support. (#1764) 
* Change t-beam-s3-core pins definitions

* Add t-beam-s3-core power initialization to properly initialize the I2C device

* Add 6-axis and 3-axis sensor detection
 2022-10-07 06:57:55 -05:00
Thomas Göttgens 1d09beb8a7 word wrap long input and fix compiler warnings 2022-10-06 18:40:31 +02:00
Thomas Göttgens 7f935717db
Update platformio.ini 2022-10-06 08:56:02 +02:00
Thomas Göttgens 5b1d3a0c51
Update platformio.ini 2022-10-06 08:55:58 +02:00
andrekir 484f340023 update PCF8563_Library to 1.0.0 2022-10-06 01:05:21 -03:00
Thomas Göttgens 62498d0935 GPS Rollup, incorporates changes from @pmarches and @lewisxhe 2022-10-05 14:59:07 +02:00
Thomas Göttgens b148781e4b
Missed one. 2022-10-04 13:29:06 +02:00
Thomas Göttgens 39a51c7fbb
update lib to make this work 2022-10-04 13:26:20 +02:00