mirror
/
meshtastic-firmware
kopia lustrzana https://github.com/meshtastic/firmware
1
0
Forkuj 1
Kod Zgłoszenia Packages Projekty Wydania Wiki Aktywność

Merge branch 'master' into BSEC2

pull/2467/head
Thomas Göttgens 2023-05-10 13:31:46 +02:00 zatwierdzone przez GitHub
rodzic 46e29402a6 28ec4e35ec
commit 9841d49fb8
Nie znaleziono w bazie danych klucza dla tego podpisu
ID klucza GPG: 4AEE18F83AFDEB23
50 zmienionych plików z 217 dodań i 252 usunięć
Pokaż statystyki Ściągnij plik aktualizacji Ściągnij plik porównania Expand all files Collapse all files

14
.github/workflows/main_matrix.yml vendored
Wyświetl plik

@ -23,9 +23,9 @@ jobs:
matrix:
include:
- board: rak11200
- board: tlora-v2-1-1.6
- board: tlora-v2-1-1_6
- board: tbeam
- board: heltec-v2.1
- board: heltec-v2_1
- board: meshtastic-diy-v1
- board: rak4631
- board: t-echo
@ -57,13 +57,13 @@ jobs:
- board: tlora-v2
- board: tlora-v1
- board: tlora_v1_3
- board: tlora-v2-1-1.6
- board: tlora-v2-1-1.8
- board: tlora-v2-1-1_6
- board: tlora-v2-1-1_8
- board: tbeam
- board: heltec-v1
- board: heltec-v2.0
- board: heltec-v2.1
- board: tbeam0.7
- board: heltec-v2_0
- board: heltec-v2_1
- board: tbeam0_7
- board: meshtastic-diy-v1
- board: meshtastic-dr-dev
- board: nano-g1

1
.trunk/.gitignore vendored
Wyświetl plik

@ -5,3 +5,4 @@
plugins
user_trunk.yaml
user.yaml
shims

19
.trunk/trunk.yaml
Wyświetl plik

@ -1,36 +1,37 @@
version: 0.1
cli:
version: 1.7.0
version: 1.9.1
plugins:
sources:
- id: trunk
ref: v0.0.14
ref: v0.0.17
uri: https://github.com/trunk-io/plugins
lint:
enabled:
- ruff@0.0.260
- yamllint@1.30.0
- taplo@0.7.0
- ruff@0.0.265
- yamllint@1.31.0
- isort@5.12.0
- markdownlint@0.33.0
- markdownlint@0.34.0
- oxipng@8.0.0
- svgo@3.0.2
- actionlint@1.6.23
- actionlint@1.6.24
- flake8@6.0.0
- hadolint@2.12.0
- shfmt@3.5.0
- shellcheck@0.9.0
- black@23.3.0
- git-diff-check
- gitleaks@8.16.2
- gitleaks@8.16.3
- clang-format@14.0.0
- prettier@2.8.7
- prettier@2.8.8
disabled:
- taplo@0.7.0
- shellcheck@0.9.0
- shfmt@3.5.0
- oxipng@8.0.0
- actionlint@1.6.22
- markdownlint@0.33.0
- markdownlint@0.34.0
- hadolint@2.12.0
- svgo@3.0.2
runtimes:

4
arch/esp32/esp32.ini
Wyświetl plik

@ -2,11 +2,14 @@
[esp32_base]
extends = arduino_base
platform = platformio/espressif32@^6.1.0
build_src_filter =
${arduino_base.build_src_filter} -<platform/nrf52/> -<platform/stm32wl> -<platform/rp2040> -<mesh/eth/>
upload_speed = 921600
debug_init_break = tbreak setup
monitor_filters = esp32_exception_decoder
board_build.filesystem = littlefs
# Remove -DMYNEWT_VAL_BLE_HS_LOG_LVL=LOG_LEVEL_CRITICAL for low level BLE logging.
@ -34,6 +37,7 @@ lib_deps =
${environmental_base.lib_deps}
https://github.com/meshtastic/esp32_https_server.git#23665b3adc080a311dcbb586ed5941b5f94d6ea2
h2zero/NimBLE-Arduino@^1.4.0
jgromes/RadioLib@^6.0.0
https://github.com/lewisxhe/XPowersLib.git#84b7373faea3118b6c37954d52f98b8a337148d6
https://github.com/meshtastic/ESP32_Codec2.git#633326c78ac251c059ab3a8c430fcdf25b41672f

48
arch/esp32/esp32c3.ini
Wyświetl plik

@ -1,49 +1,5 @@
[esp32c3_base]
extends = arduino_base
platform = platformio/espressif32@^6.1.0
build_src_filter =
${arduino_base.build_src_filter} -<platform/nrf52/> -<platform/stm32wl> -<platform/rp2040> -<mesh/eth/>
upload_speed = 961200
extends = esp32_base
monitor_speed = 115200
debug_init_break = tbreak setup
monitor_filters = esp32_c3_exception_decoder
board_build.filesystem = littlefs
# Remove -DMYNEWT_VAL_BLE_HS_LOG_LVL=LOG_LEVEL_CRITICAL for low level BLE logging.
# See library directory for BLE logging possible values: .pio/libdeps/tbeam/NimBLE-Arduino/src/log_common/log_common.h
# This overrides the BLE logging default of LOG_LEVEL_INFO (1) from: .pio/libdeps/tbeam/NimBLE-Arduino/src/esp_nimble_cfg.h
build_flags =
${arduino_base.build_flags}
-Wall
-Wextra
-Isrc/platform/esp32
-std=c++11
-DLOG_LOCAL_LEVEL=ESP_LOG_DEBUG
-DCORE_DEBUG_LEVEL=ARDUHAL_LOG_LEVEL_DEBUG
-DMYNEWT_VAL_BLE_HS_LOG_LVL=LOG_LEVEL_CRITICAL
-DCONFIG_BT_NIMBLE_ENABLED
-DCONFIG_NIMBLE_CPP_LOG_LEVEL=2
-DCONFIG_BT_NIMBLE_MAX_CCCDS=20
-DESP_OPENSSL_SUPPRESS_LEGACY_WARNING
-DUSE_BSEC2
;-DDEBUG_HEAP
lib_deps =
${arduino_base.lib_deps}
${networking_base.lib_deps}
${environmental_base.lib_deps}
https://github.com/meshtastic/esp32_https_server.git#23665b3adc080a311dcbb586ed5941b5f94d6ea2
h2zero/NimBLE-Arduino@^1.4.0
https://github.com/lewisxhe/XPowersLib.git#84b7373faea3118b6c37954d52f98b8a337148d6
https://github.com/meshtastic/ESP32_Codec2.git#633326c78ac251c059ab3a8c430fcdf25b41672f
boschsensortec/BSEC2 Software Library@^1.3.2200
boschsensortec/BME68x Sensor Library@^1.1.40407
lib_ignore =
segger_rtt
ESP32 BLE Arduino
BSEC Software Library
; customize the partition table
; http://docs.platformio.org/en/latest/platforms/espressif32.html#partition-tables
board_build.partitions = partition-table.csv

45
arch/esp32/esp32s2.ini
Wyświetl plik

@ -1,47 +1,16 @@
[esp32s2_base]
extends = arduino_base
platform = platformio/espressif32@^6.1.0
extends = esp32_base
build_src_filter =
${arduino_base.build_src_filter} -<platform/nrf52/> -<platform/stm32wl> -<platform/rp2040> -<mesh/eth/> -<nimble/>
upload_speed = 961200
${esp32_base.build_src_filter} -<nimble/>
monitor_speed = 115200
debug_init_break = tbreak setup
monitor_filters = esp32_exception_decoder
board_build.filesystem = littlefs
# Remove -DMYNEWT_VAL_BLE_HS_LOG_LVL=LOG_LEVEL_CRITICAL for low level BLE logging.
# See library directory for BLE logging possible values: .pio/libdeps/tbeam/NimBLE-Arduino/src/log_common/log_common.h
# This overrides the BLE logging default of LOG_LEVEL_INFO (1) from: .pio/libdeps/tbeam/NimBLE-Arduino/src/esp_nimble_cfg.h
build_flags =
${arduino_base.build_flags}
-Wall
-Wextra
-Isrc/platform/esp32
-std=c++11
-DLOG_LOCAL_LEVEL=ESP_LOG_DEBUG
-DCORE_DEBUG_LEVEL=ARDUHAL_LOG_LEVEL_DEBUG
-DMYNEWT_VAL_BLE_HS_LOG_LVL=LOG_LEVEL_CRITICAL
-DAXP_DEBUG_PORT=Serial
-DCONFIG_BT_NIMBLE_ENABLED
-DCONFIG_NIMBLE_CPP_LOG_LEVEL=2
-DCONFIG_BT_NIMBLE_MAX_CCCDS=20
-DESP_OPENSSL_SUPPRESS_LEGACY_WARNING
${esp32_base.build_flags}
-DHAS_BLUETOOTH=0
;-DDEBUG_HEAP
lib_deps =
${arduino_base.lib_deps}
${networking_base.lib_deps}
${environmental_base.lib_deps}
https://github.com/meshtastic/esp32_https_server.git#23665b3adc080a311dcbb586ed5941b5f94d6ea2
https://github.com/lewisxhe/XPowersLib.git#84b7373faea3118b6c37954d52f98b8a337148d6
https://github.com/meshtastic/ESP32_Codec2.git#633326c78ac251c059ab3a8c430fcdf25b41672f
lib_ignore =
segger_rtt
ESP32 BLE Arduino
; customize the partition table
; http://docs.platformio.org/en/latest/platforms/espressif32.html#partition-tables
board_build.partitions = partition-table.csv
${esp32_base.lib_ignore}
NimBLE-Arduino

46
arch/esp32/esp32s3.ini
Wyświetl plik

@ -1,47 +1,5 @@
[esp32s3_base]
extends = arduino_base
platform = platformio/espressif32@^6.1.0
build_src_filter =
${arduino_base.build_src_filter} -<platform/nrf52/> -<platform/stm32wl> -<platform/rp2040> -<mesh/eth/>
upload_speed = 961200
extends = esp32_base
monitor_speed = 115200
debug_init_break = tbreak setup
monitor_filters = esp32_exception_decoder
board_build.filesystem = littlefs
# Remove -DMYNEWT_VAL_BLE_HS_LOG_LVL=LOG_LEVEL_CRITICAL for low level BLE logging.
# See library directory for BLE logging possible values: .pio/libdeps/tbeam/NimBLE-Arduino/src/log_common/log_common.h
# This overrides the BLE logging default of LOG_LEVEL_INFO (1) from: .pio/libdeps/tbeam/NimBLE-Arduino/src/esp_nimble_cfg.h
build_flags =
${arduino_base.build_flags}
-Wall
-Wextra
-Isrc/platform/esp32
-std=c++11
-DLOG_LOCAL_LEVEL=ESP_LOG_DEBUG
-DCORE_DEBUG_LEVEL=ARDUHAL_LOG_LEVEL_DEBUG
-DMYNEWT_VAL_BLE_HS_LOG_LVL=LOG_LEVEL_CRITICAL
-DAXP_DEBUG_PORT=Serial
-DCONFIG_BT_NIMBLE_ENABLED
-DCONFIG_NIMBLE_CPP_LOG_LEVEL=2
-DCONFIG_BT_NIMBLE_MAX_CCCDS=20
-DESP_OPENSSL_SUPPRESS_LEGACY_WARNING
;-DDEBUG_HEAP
lib_deps =
${arduino_base.lib_deps}
${networking_base.lib_deps}
${environmental_base.lib_deps}
https://github.com/meshtastic/esp32_https_server.git#23665b3adc080a311dcbb586ed5941b5f94d6ea2
h2zero/NimBLE-Arduino@^1.4.0
https://github.com/lewisxhe/XPowersLib.git#84b7373faea3118b6c37954d52f98b8a337148d6
https://github.com/meshtastic/ESP32_Codec2.git#633326c78ac251c059ab3a8c430fcdf25b41672f
lib_ignore =
segger_rtt
ESP32 BLE Arduino
; customize the partition table
; http://docs.platformio.org/en/latest/platforms/espressif32.html#partition-tables
board_build.partitions = partition-table.csv

14
arch/nrf52/nrf52.ini
Wyświetl plik

@ -1,18 +1,20 @@
[nrf52_base]
; Instead of the standard nordicnrf52 platform, we use our fork which has our added variant files
platform = platformio/nordicnrf52@^9.5.0
extends = arduino_base
build_type = debug ; I'm debugging with ICE a lot now
build_flags =
${arduino_base.build_flags} -Wno-unused-variable
-Isrc/platform/nrf52
build_src_filter =
${arduino_base.build_src_filter} -<platform/esp32/> -<platform/stm32wl> -<nimble/> -<mesh/api/> -<mesh/http/> -<modules/esp32> -<mqtt/> -<platform/rp2040> -<mesh/eth/>
lib_deps=
${arduino_base.lib_deps}
jgromes/RadioLib@^6.0.0
lib_ignore =
BluetoothOTA
; Note: By default no lora device is created for this build - it uses a simulated interface
[env:feather_nrf52832]
extends = nrf52_base
board = adafruit_feather_nrf52832

7
arch/nrf52/nrf52832.ini 100644
Wyświetl plik

@ -0,0 +1,7 @@
[nrf52832_base]
extends = nrf52_base
build_flags = ${nrf52_base.build_flags}
lib_deps =
${nrf52_base.lib_deps}

11
arch/nrf52/nrf52840.ini
Wyświetl plik

@ -1,14 +1,9 @@
[nrf52840_base]
extends = nrf52_base
build_flags = ${nrf52_base.build_flags}
lib_deps =
${arduino_base.lib_deps}
${nrf52_base.lib_deps}
${environmental_base.lib_deps}
https://github.com/Kongduino/Adafruit_nRFCrypto.git#e31a8825ea3300b163a0a3c1ddd5de34e10e1371
; Note: By default no lora device is created for this build - it uses a simulated interface
[env:nrf52840dk]
extends = nrf52840_base
board = nrf52840_dk

9
arch/portduino/portduino.ini
Wyświetl plik

@ -2,6 +2,7 @@
[portduino_base]
platform = https://github.com/meshtastic/platform-native.git#096b3c3e9c5c8e19d4c3b6cd803fffef2a9be4c5
framework = arduino
build_src_filter =
${env.build_src_filter}
-<platform/esp32/>
@ -16,8 +17,14 @@ build_src_filter =
-<modules/Telemetry/AirQualityTelemetry.cpp>
-<modules/Telemetry/Sensor>
+<../variants/portduino>
lib_deps =
${env.lib_deps}
${networking_base.lib_deps}
rweather/Crypto@^0.4.0
build_flags = ${arduino_base.build_flags} -fPIC -Isrc/platform/portduino
jgromes/RadioLib@^6.0.0
build_flags =
${arduino_base.build_flags}
-fPIC
-Isrc/platform/portduino

4
arch/rp2040/rp2040.ini
Wyświetl plik

@ -2,6 +2,7 @@
[rp2040_base]
platform = https://github.com/maxgerhardt/platform-raspberrypi.git#9f8c10e50b5acd18e7bfd32638199c655be73a5b
extends = arduino_base
board_build.core = earlephilhower
board_build.filesystem_size = 0.5m
build_flags =
@ -11,9 +12,12 @@ build_flags =
# -D _POSIX_THREADS
build_src_filter =
${arduino_base.build_src_filter} -<platform/esp32/> -<nimble/> -<mesh/api/> -<mesh/http/> -<modules/esp32> -<mqtt/> -<platform/nrf52/> -<platform/stm32wl> -<mesh/eth/>
lib_ignore =
BluetoothOTA
lib_deps =
${arduino_base.lib_deps}
${environmental_base.lib_deps}
jgromes/RadioLib@^6.0.0
https://github.com/kokke/tiny-AES-c.git#f06ac37fc31dfdaca2e0d9bec83f90d5663c319b

8
arch/stm32/stm32wl5e.ini
Wyświetl plik

@ -2,17 +2,19 @@
platform = platformio/ststm32@^15.4.1
board = generic_wl5e
framework = arduino
build_type = debug
build_flags =
${arduino_base.build_flags}
-Isrc/platform/stm32wl -g
-DHAL_SUBGHZ_MODULE_ENABLED
# Arduino/PlatformIO framework-arduinoststm32 package does not presently have SUBGHZSPI support
# -DPIN_SPI_MOSI=PINSUBGHZSPIMOSI -DPIN_SPI_MISO=PINSUBGHZSPIMISO -DPIN_SPI_SCK=PINSUBGHZSPISCK
build_src_filter =
${arduino_base.build_src_filter} -<platform/esp32/> -<nimble/> -<mesh/api/> -<mesh/http/> -<modules/esp32> -<mesh/eth/> -<mqtt/> -<graphics> -<input> -<buzz> -<modules/Telemetry> -<platform/nrf52> -<platform/portduino> -<platform/rp2040>
lib_deps =
${env.lib_deps}
jgromes/RadioLib@^6.0.0
https://github.com/kokke/tiny-AES-c.git#f06ac37fc31dfdaca2e0d9bec83f90d5663c319b
lib_ignore =
mathertel/OneButton@^2.0.3

0
bpi_picow_esp32_s3.json → boards/bpi_picow_esp32_s3.json
Wyświetl plik

3
platformio.ini
Wyświetl plik

@ -66,9 +66,6 @@ lib_deps =
https://github.com/meshtastic/ArduinoThread.git#72921ac222eed6f526ba1682023cee290d9aa1b3
nanopb/Nanopb@^0.4.7
erriez/ErriezCRC32@^1.0.1
; temp: do this till > 5.7.0 release to keep (some) SX1262 and SX1280 working - resolves -705 error during init
https://github.com/jgromes/RadioLib.git#45c5859338590b7eede23cb2f95284c3fb0cf08e
; jgromes/RadioLib@^5.7.0
; Used for the code analysis in PIO Home / Inspect
check_tool = cppcheck

5
src/configuration.h
Wyświetl plik

@ -124,6 +124,11 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define MPU6050_ADDR 0x68
#define LIS3DH_ADR 0x18
// -----------------------------------------------------------------------------
// LED
// -----------------------------------------------------------------------------
#define NCP5623_ADDR 0x38
// -----------------------------------------------------------------------------
// Security
// -----------------------------------------------------------------------------

1
src/detect/ScanI2C.h
Wyświetl plik

@ -33,6 +33,7 @@ class ScanI2C
PMSA0031,
MPU6050,
LIS3DH,
NCP5623,
} DeviceType;
// typedef uint8_t DeviceAddress;

1
src/detect/ScanI2CTwoWire.cpp
Wyświetl plik

@ -213,6 +213,7 @@ void ScanI2CTwoWire::scanPort(I2CPort port)
break;
SCAN_SIMPLE_CASE(ST7567_ADDRESS, SCREEN_ST7567, "st7567 display found\n")
SCAN_SIMPLE_CASE(NCP5623_ADDR, NCP5623, "NCP5623 RGB LED found\n");
#ifdef HAS_PMU
SCAN_SIMPLE_CASE(XPOWERS_AXP192_AXP2101_ADDRESS, PMU_AXP192_AXP2101, "axp192/axp2101 PMU found\n")

20
src/gps/NMEAWPL.cpp
Wyświetl plik

@ -1,5 +1,7 @@
#include "NMEAWPL.h"
#include "GeoCoord.h"
#include "RTC.h"
#include <time.h>
/* -------------------------------------------
* 1 2 3 4 5 6
@ -56,12 +58,18 @@ uint32_t printWPL(char *buf, size_t bufsz, const meshtastic_Position &pos, const
uint32_t printGGA(char *buf, size_t bufsz, const meshtastic_Position &pos)
{
GeoCoord geoCoord(pos.latitude_i, pos.longitude_i, pos.altitude);
uint32_t len =
snprintf(buf, bufsz, "$GNGGA,%06u.%03u,%02d%07.4f,%c,%03d%07.4f,%c,%u,%02u,%04u,%04d,%c,%04d,%c,%d,%04d", pos.time / 1000,
pos.time % 1000, geoCoord.getDMSLatDeg(), (abs(geoCoord.getLatitude()) - geoCoord.getDMSLatDeg() * 1e+7) * 6e-6,
geoCoord.getDMSLatCP(), geoCoord.getDMSLonDeg(),
(abs(geoCoord.getLongitude()) - geoCoord.getDMSLonDeg() * 1e+7) * 6e-6, geoCoord.getDMSLonCP(), pos.fix_type,
pos.sats_in_view, pos.HDOP, geoCoord.getAltitude(), 'M', pos.altitude_geoidal_separation, 'M', 0, 0);
tm *t = localtime((time_t *)&pos.timestamp);
if (getRTCQuality() > 0) { // use the device clock if we got time from somewhere. If not, use the GPS timestamp.
uint32_t rtc_sec = getValidTime(RTCQuality::RTCQualityDevice);
t = localtime((time_t *)&rtc_sec);
}
uint32_t len = snprintf(
buf, bufsz, "$GNGGA,%02d%02d%02d.%02d,%02d%07.4f,%c,%03d%07.4f,%c,%u,%02u,%04u,%04d,%c,%04d,%c,%d,%04d", t->tm_hour,
t->tm_min, t->tm_sec, pos.timestamp_millis_adjust, geoCoord.getDMSLatDeg(),
(abs(geoCoord.getLatitude()) - geoCoord.getDMSLatDeg() * 1e+7) * 6e-6, geoCoord.getDMSLatCP(), geoCoord.getDMSLonDeg(),
(abs(geoCoord.getLongitude()) - geoCoord.getDMSLonDeg() * 1e+7) * 6e-6, geoCoord.getDMSLonCP(), pos.fix_quality,
pos.sats_in_view, pos.HDOP, geoCoord.getAltitude(), 'M', pos.altitude_geoidal_separation, 'M', 0, 0);
uint32_t chk = 0;
for (uint32_t i = 1; i < len; i++) {

19
src/main.cpp
Wyświetl plik

@ -100,6 +100,8 @@ uint8_t kb_model;
ScanI2C::DeviceAddress rtc_found = ScanI2C::ADDRESS_NONE;
// The I2C address of the Accelerometer (if found)
ScanI2C::DeviceAddress accelerometer_found = ScanI2C::ADDRESS_NONE;
// The I2C address of the RGB LED (if found)
ScanI2C::FoundDevice rgb_found = ScanI2C::FoundDevice(ScanI2C::DeviceType::NONE, ScanI2C::ADDRESS_NONE);
#if !defined(ARCH_PORTDUINO) && !defined(ARCH_STM32WL)
ATECCX08A atecc;
@ -159,6 +161,7 @@ static OSThread *buttonThread;
uint32_t ButtonThread::longPressTime = 0;
#endif
static OSThread *accelerometerThread;
SPISettings spiSettings(4000000, MSBFIRST, SPI_MODE0);
RadioInterface *rIf = NULL;
@ -344,6 +347,8 @@ void setup()
* nodeTelemetrySensorsMap singleton. This wraps that logic in a temporary scope to declare the temporary field
* "found".
*/
// Only one supported RGB LED currently
rgb_found = i2cScanner->find(ScanI2C::DeviceType::NCP5623);
#if !defined(ARCH_PORTDUINO)
auto acc_info = i2cScanner->firstAccelerometer();
@ -503,6 +508,10 @@ void setup()
digitalWrite(SX126X_ANT_SW, 1);
#endif
// Init LockingHAL first, to use it for radio init
LockingArduinoHal *RadioLibHAL = new LockingArduinoHal(SPI, spiSettings);
// radio init MUST BE AFTER service.init, so we have our radio config settings (from nodedb init)
#if !HAS_RADIO && defined(ARCH_PORTDUINO)
@ -520,7 +529,7 @@ void setup()
#if defined(RF95_IRQ)
if (!rIf) {
rIf = new RF95Interface(RF95_NSS, RF95_IRQ, RF95_RESET, RF95_DIO1, SPI);
rIf = new RF95Interface(RadioLibHAL, RF95_NSS, RF95_IRQ, RF95_RESET, RF95_DIO1);
if (!rIf->init()) {
LOG_WARN("Failed to find RF95 radio\n");
delete rIf;
@ -533,7 +542,7 @@ void setup()
#if defined(USE_SX1262)
if (!rIf) {
rIf = new SX1262Interface(SX126X_CS, SX126X_DIO1, SX126X_RESET, SX126X_BUSY, SPI);
rIf = new SX1262Interface(RadioLibHAL, SX126X_CS, SX126X_DIO1, SX126X_RESET, SX126X_BUSY);
if (!rIf->init()) {
LOG_WARN("Failed to find SX1262 radio\n");
delete rIf;
@ -546,7 +555,7 @@ void setup()
#if defined(USE_SX1268)
if (!rIf) {
rIf = new SX1268Interface(SX126X_CS, SX126X_DIO1, SX126X_RESET, SX126X_BUSY, SPI);
rIf = new SX1268Interface(RadioLibHAL, SX126X_CS, SX126X_DIO1, SX126X_RESET, SX126X_BUSY);
if (!rIf->init()) {
LOG_WARN("Failed to find SX1268 radio\n");
delete rIf;
@ -559,7 +568,7 @@ void setup()
#if defined(USE_LLCC68)
if (!rIf) {
rIf = new LLCC68Interface(SX126X_CS, SX126X_DIO1, SX126X_RESET, SX126X_BUSY, SPI);
rIf = new LLCC68Interface(RadioLibHAL, SX126X_CS, SX126X_DIO1, SX126X_RESET, SX126X_BUSY);
if (!rIf->init()) {
LOG_WARN("Failed to find LLCC68 radio\n");
delete rIf;
@ -572,7 +581,7 @@ void setup()
#if defined(USE_SX1280)
if (!rIf) {
rIf = new SX1280Interface(SX128X_CS, SX128X_DIO1, SX128X_RESET, SX128X_BUSY, SPI);
rIf = new SX1280Interface(RadioLibHAL, SX128X_CS, SX128X_DIO1, SX128X_RESET, SX128X_BUSY);
if (!rIf->init()) {
LOG_WARN("Failed to find SX1280 radio\n");
delete rIf;

5
src/main.h
Wyświetl plik

@ -8,6 +8,7 @@
#include "memGet.h"
#include "mesh/generated/meshtastic/config.pb.h"
#include "mesh/generated/meshtastic/telemetry.pb.h"
#include <SPI.h>
#include <map>
#if !defined(ARCH_PORTDUINO) && !defined(ARCH_STM32WL)
#include <SparkFun_ATECCX08a_Arduino_Library.h>
@ -26,6 +27,7 @@ extern ScanI2C::DeviceAddress cardkb_found;
extern uint8_t kb_model;
extern ScanI2C::DeviceAddress rtc_found;
extern ScanI2C::DeviceAddress accelerometer_found;
extern ScanI2C::FoundDevice rgb_found;
extern bool eink_found;
extern bool pmu_found;
@ -65,3 +67,6 @@ extern bool runASAP;
void nrf52Setup(), esp32Setup(), nrf52Loop(), esp32Loop(), clearBonds();
meshtastic_DeviceMetadata getDeviceMetadata();
// FIXME, we default to 4MHz SPI, SPI mode 0, check if the datasheet says it can really do that
extern SPISettings spiSettings;

6
src/mesh/LLCC68Interface.cpp
Wyświetl plik

@ -2,8 +2,8 @@
#include "configuration.h"
#include "error.h"
LLCC68Interface::LLCC68Interface(RADIOLIB_PIN_TYPE cs, RADIOLIB_PIN_TYPE irq, RADIOLIB_PIN_TYPE rst, RADIOLIB_PIN_TYPE busy,
SPIClass &spi)
: SX126xInterface(cs, irq, rst, busy, spi)
LLCC68Interface::LLCC68Interface(LockingArduinoHal *hal, RADIOLIB_PIN_TYPE cs, RADIOLIB_PIN_TYPE irq, RADIOLIB_PIN_TYPE rst,
RADIOLIB_PIN_TYPE busy)
: SX126xInterface(hal, cs, irq, rst, busy)
{
}

5
src/mesh/LLCC68Interface.h
Wyświetl plik

@ -6,12 +6,13 @@
* Our adapter for LLCC68 radios
* https://www.semtech.com/products/wireless-rf/lora-core/llcc68
* ⚠️⚠️⚠️
* Be aware that LLCC68 does not support Spreading Factor 12 (SF12) and will not work on the default "Long Slow" channel.
* Be aware that LLCC68 does not support Spreading Factor 12 (SF12) and will not work on the "LongSlow" and "VLongSlow" channels.
* You must change the channel if you get `Critical Error #3` with this module.
* ⚠️⚠️⚠️
*/
class LLCC68Interface : public SX126xInterface<LLCC68>
{
public:
LLCC68Interface(RADIOLIB_PIN_TYPE cs, RADIOLIB_PIN_TYPE irq, RADIOLIB_PIN_TYPE rst, RADIOLIB_PIN_TYPE busy, SPIClass &spi);
LLCC68Interface(LockingArduinoHal *hal, RADIOLIB_PIN_TYPE cs, RADIOLIB_PIN_TYPE irq, RADIOLIB_PIN_TYPE rst,
RADIOLIB_PIN_TYPE busy);
};

6
src/mesh/RF95Interface.cpp
Wyświetl plik

@ -11,9 +11,9 @@
#define POWER_DEFAULT 17 // How much power to use if the user hasn't set a power level
RF95Interface::RF95Interface(RADIOLIB_PIN_TYPE cs, RADIOLIB_PIN_TYPE irq, RADIOLIB_PIN_TYPE rst, RADIOLIB_PIN_TYPE busy,
SPIClass &spi)
: RadioLibInterface(cs, irq, rst, busy, spi)
RF95Interface::RF95Interface(LockingArduinoHal *hal, RADIOLIB_PIN_TYPE cs, RADIOLIB_PIN_TYPE irq, RADIOLIB_PIN_TYPE rst,
RADIOLIB_PIN_TYPE busy)
: RadioLibInterface(hal, cs, irq, rst, busy)
{
LOG_WARN("RF95Interface(cs=%d, irq=%d, rst=%d, busy=%d)\n", cs, irq, rst, busy);
}

5
src/mesh/RF95Interface.h
Wyświetl plik

@ -12,7 +12,8 @@ class RF95Interface : public RadioLibInterface
RadioLibRF95 *lora = NULL; // Either a RFM95 or RFM96 depending on what was stuffed on this board
public:
RF95Interface(RADIOLIB_PIN_TYPE cs, RADIOLIB_PIN_TYPE irq, RADIOLIB_PIN_TYPE rst, RADIOLIB_PIN_TYPE busy, SPIClass &spi);
RF95Interface(LockingArduinoHal *hal, RADIOLIB_PIN_TYPE cs, RADIOLIB_PIN_TYPE irq, RADIOLIB_PIN_TYPE rst,
RADIOLIB_PIN_TYPE busy);
// TODO: Verify that this irq flag works with RFM95 / SX1276 radios the way it used to
bool isIRQPending() override { return lora->getIRQFlags() & RADIOLIB_SX127X_MASK_IRQ_FLAG_VALID_HEADER; }
@ -39,7 +40,7 @@ class RF95Interface : public RadioLibInterface
/**
* Enable a particular ISR callback glue function
*/
virtual void enableInterrupt(void (*callback)()) { lora->setDio0Action(callback); }
virtual void enableInterrupt(void (*callback)()) { lora->setDio0Action(callback, RISING); }
/** can we detect a LoRa preamble on the current channel? */
virtual bool isChannelActive() override;

17
src/mesh/RadioLibInterface.cpp
Wyświetl plik

@ -9,26 +9,23 @@
#include <pb_decode.h>
#include <pb_encode.h>
// FIXME, we default to 4MHz SPI, SPI mode 0, check if the datasheet says it can really do that
static SPISettings spiSettings(4000000, MSBFIRST, SPI_MODE0);
void LockingModule::SPIbeginTransaction()
void LockingArduinoHal::spiBeginTransaction()
{
spiLock->lock();
Module::SPIbeginTransaction();
ArduinoHal::spiBeginTransaction();
}
void LockingModule::SPIendTransaction()
void LockingArduinoHal::spiEndTransaction()
{
spiLock->unlock();
Module::SPIendTransaction();
ArduinoHal::spiEndTransaction();
}
RadioLibInterface::RadioLibInterface(RADIOLIB_PIN_TYPE cs, RADIOLIB_PIN_TYPE irq, RADIOLIB_PIN_TYPE rst, RADIOLIB_PIN_TYPE busy,
SPIClass &spi, PhysicalLayer *_iface)
: NotifiedWorkerThread("RadioIf"), module(cs, irq, rst, busy, spi, spiSettings), iface(_iface)
RadioLibInterface::RadioLibInterface(LockingArduinoHal *hal, RADIOLIB_PIN_TYPE cs, RADIOLIB_PIN_TYPE irq, RADIOLIB_PIN_TYPE rst,
RADIOLIB_PIN_TYPE busy, PhysicalLayer *_iface)
: NotifiedWorkerThread("RadioIf"), module(hal, cs, irq, rst, busy), iface(_iface)
{
instance = this;
#if defined(ARCH_STM32WL) && defined(USE_SX1262)

37
src/mesh/RadioLibInterface.h
Wyświetl plik

@ -13,35 +13,18 @@
#define INTERRUPT_ATTR
#endif
#define RADIOLIB_PIN_TYPE uint32_t
/**
* A wrapper for the RadioLib Module class, that adds mutex for SPI bus access
* We need to override the RadioLib ArduinoHal class to add mutex protection for SPI bus access
*/
class LockingModule : public Module
class LockingArduinoHal : public ArduinoHal
{
public:
/*!
\brief Extended SPI-based module constructor.
LockingArduinoHal(SPIClass &spi, SPISettings spiSettings) : ArduinoHal(spi, spiSettings){};
\param cs Arduino pin to be used as chip select.
\param irq Arduino pin to be used as interrupt/GPIO.
\param rst Arduino pin to be used as hardware reset for the module.
\param gpio Arduino pin to be used as additional interrupt/GPIO.
\param spi SPI interface to be used, can also use software SPI implementations.
\param spiSettings SPI interface settings.
*/
LockingModule(RADIOLIB_PIN_TYPE cs, RADIOLIB_PIN_TYPE irq, RADIOLIB_PIN_TYPE rst, RADIOLIB_PIN_TYPE gpio, SPIClass &spi,
SPISettings spiSettings)
: Module(cs, irq, rst, gpio, spi, spiSettings)
{
}
void SPIbeginTransaction() override;
void SPIendTransaction() override;
void spiBeginTransaction() override;
void spiEndTransaction() override;
};
class RadioLibInterface : public RadioInterface, protected concurrency::NotifiedWorkerThread
@ -73,7 +56,7 @@ class RadioLibInterface : public RadioInterface, protected concurrency::Notified
float currentLimit = 100; // 100mA OCP - Should be acceptable for RFM95/SX127x chipset.
LockingModule module; // The HW interface to the radio
Module module; // The HW interface to the radio
/**
* provides lowest common denominator RadioLib API
@ -99,8 +82,8 @@ class RadioLibInterface : public RadioInterface, protected concurrency::Notified
virtual void enableInterrupt(void (*)()) = 0;
public:
RadioLibInterface(RADIOLIB_PIN_TYPE cs, RADIOLIB_PIN_TYPE irq, RADIOLIB_PIN_TYPE rst, RADIOLIB_PIN_TYPE busy, SPIClass &spi,
PhysicalLayer *iface = NULL);
RadioLibInterface(LockingArduinoHal *hal, RADIOLIB_PIN_TYPE cs, RADIOLIB_PIN_TYPE irq, RADIOLIB_PIN_TYPE rst,
RADIOLIB_PIN_TYPE busy, PhysicalLayer *iface = NULL);
virtual ErrorCode send(meshtastic_MeshPacket *p) override;

2
src/mesh/RadioLibRF95.cpp
Wyświetl plik

@ -79,5 +79,5 @@ bool RadioLibRF95::isReceiving()
uint8_t RadioLibRF95::readReg(uint8_t addr)
{
return _mod->SPIreadRegister(addr);
return mod->SPIreadRegister(addr);
}

6
src/mesh/SX1262Interface.cpp
Wyświetl plik

@ -2,8 +2,8 @@
#include "configuration.h"
#include "error.h"
SX1262Interface::SX1262Interface(RADIOLIB_PIN_TYPE cs, RADIOLIB_PIN_TYPE irq, RADIOLIB_PIN_TYPE rst, RADIOLIB_PIN_TYPE busy,
SPIClass &spi)
: SX126xInterface(cs, irq, rst, busy, spi)
SX1262Interface::SX1262Interface(LockingArduinoHal *hal, RADIOLIB_PIN_TYPE cs, RADIOLIB_PIN_TYPE irq, RADIOLIB_PIN_TYPE rst,
RADIOLIB_PIN_TYPE busy)
: SX126xInterface(hal, cs, irq, rst, busy)
{
}

3
src/mesh/SX1262Interface.h
Wyświetl plik

@ -8,5 +8,6 @@
class SX1262Interface : public SX126xInterface<SX1262>
{
public:
SX1262Interface(RADIOLIB_PIN_TYPE cs, RADIOLIB_PIN_TYPE irq, RADIOLIB_PIN_TYPE rst, RADIOLIB_PIN_TYPE busy, SPIClass &spi);
SX1262Interface(LockingArduinoHal *hal, RADIOLIB_PIN_TYPE cs, RADIOLIB_PIN_TYPE irq, RADIOLIB_PIN_TYPE rst,
RADIOLIB_PIN_TYPE busy);
};

6
src/mesh/SX1268Interface.cpp
Wyświetl plik

@ -2,9 +2,9 @@
#include "configuration.h"
#include "error.h"
SX1268Interface::SX1268Interface(RADIOLIB_PIN_TYPE cs, RADIOLIB_PIN_TYPE irq, RADIOLIB_PIN_TYPE rst, RADIOLIB_PIN_TYPE busy,
SPIClass &spi)
: SX126xInterface(cs, irq, rst, busy, spi)
SX1268Interface::SX1268Interface(LockingArduinoHal *hal, RADIOLIB_PIN_TYPE cs, RADIOLIB_PIN_TYPE irq, RADIOLIB_PIN_TYPE rst,
RADIOLIB_PIN_TYPE busy)
: SX126xInterface(hal, cs, irq, rst, busy)
{
}

3
src/mesh/SX1268Interface.h
Wyświetl plik

@ -10,5 +10,6 @@ class SX1268Interface : public SX126xInterface<SX1268>
public:
virtual float getFreq() override;
SX1268Interface(RADIOLIB_PIN_TYPE cs, RADIOLIB_PIN_TYPE irq, RADIOLIB_PIN_TYPE rst, RADIOLIB_PIN_TYPE busy, SPIClass &spi);
SX1268Interface(LockingArduinoHal *hal, RADIOLIB_PIN_TYPE cs, RADIOLIB_PIN_TYPE irq, RADIOLIB_PIN_TYPE rst,
RADIOLIB_PIN_TYPE busy);
};

6
src/mesh/SX126xInterface.cpp
Wyświetl plik

@ -9,9 +9,9 @@
#endif
template <typename T>
SX126xInterface<T>::SX126xInterface(RADIOLIB_PIN_TYPE cs, RADIOLIB_PIN_TYPE irq, RADIOLIB_PIN_TYPE rst, RADIOLIB_PIN_TYPE busy,
SPIClass &spi)
: RadioLibInterface(cs, irq, rst, busy, spi, &lora), lora(&module)
SX126xInterface<T>::SX126xInterface(LockingArduinoHal *hal, RADIOLIB_PIN_TYPE cs, RADIOLIB_PIN_TYPE irq, RADIOLIB_PIN_TYPE rst,
RADIOLIB_PIN_TYPE busy)
: RadioLibInterface(hal, cs, irq, rst, busy, &lora), lora(&module)
{
LOG_WARN("SX126xInterface(cs=%d, irq=%d, rst=%d, busy=%d)\n", cs, irq, rst, busy);
}

3
src/mesh/SX126xInterface.h
Wyświetl plik

@ -9,7 +9,8 @@
template <class T> class SX126xInterface : public RadioLibInterface
{
public:
SX126xInterface(RADIOLIB_PIN_TYPE cs, RADIOLIB_PIN_TYPE irq, RADIOLIB_PIN_TYPE rst, RADIOLIB_PIN_TYPE busy, SPIClass &spi);
SX126xInterface(LockingArduinoHal *hal, RADIOLIB_PIN_TYPE cs, RADIOLIB_PIN_TYPE irq, RADIOLIB_PIN_TYPE rst,
RADIOLIB_PIN_TYPE busy);
/// Initialise the Driver transport hardware and software.
/// Make sure the Driver is properly configured before calling init().

6
src/mesh/SX1280Interface.cpp
Wyświetl plik

@ -2,8 +2,8 @@
#include "configuration.h"
#include "error.h"
SX1280Interface::SX1280Interface(RADIOLIB_PIN_TYPE cs, RADIOLIB_PIN_TYPE irq, RADIOLIB_PIN_TYPE rst, RADIOLIB_PIN_TYPE busy,
SPIClass &spi)
: SX128xInterface(cs, irq, rst, busy, spi)
SX1280Interface::SX1280Interface(LockingArduinoHal *hal, RADIOLIB_PIN_TYPE cs, RADIOLIB_PIN_TYPE irq, RADIOLIB_PIN_TYPE rst,
RADIOLIB_PIN_TYPE busy)
: SX128xInterface(hal, cs, irq, rst, busy)
{
}

3
src/mesh/SX1280Interface.h
Wyświetl plik

@ -9,5 +9,6 @@
class SX1280Interface : public SX128xInterface<SX1280>
{
public:
SX1280Interface(RADIOLIB_PIN_TYPE cs, RADIOLIB_PIN_TYPE irq, RADIOLIB_PIN_TYPE rst, RADIOLIB_PIN_TYPE busy, SPIClass &spi);
SX1280Interface(LockingArduinoHal *hal, RADIOLIB_PIN_TYPE cs, RADIOLIB_PIN_TYPE irq, RADIOLIB_PIN_TYPE rst,
RADIOLIB_PIN_TYPE busy);
};

6
src/mesh/SX128xInterface.cpp
Wyświetl plik

@ -9,9 +9,9 @@
#endif
template <typename T>
SX128xInterface<T>::SX128xInterface(RADIOLIB_PIN_TYPE cs, RADIOLIB_PIN_TYPE irq, RADIOLIB_PIN_TYPE rst, RADIOLIB_PIN_TYPE busy,
SPIClass &spi)
: RadioLibInterface(cs, irq, rst, busy, spi, &lora), lora(&module)
SX128xInterface<T>::SX128xInterface(LockingArduinoHal *hal, RADIOLIB_PIN_TYPE cs, RADIOLIB_PIN_TYPE irq, RADIOLIB_PIN_TYPE rst,
RADIOLIB_PIN_TYPE busy)
: RadioLibInterface(hal, cs, irq, rst, busy, &lora), lora(&module)
{
LOG_WARN("SX128xInterface(cs=%d, irq=%d, rst=%d, busy=%d)\n", cs, irq, rst, busy);
}

3
src/mesh/SX128xInterface.h
Wyświetl plik

@ -9,7 +9,8 @@
template <class T> class SX128xInterface : public RadioLibInterface
{
public:
SX128xInterface(RADIOLIB_PIN_TYPE cs, RADIOLIB_PIN_TYPE irq, RADIOLIB_PIN_TYPE rst, RADIOLIB_PIN_TYPE busy, SPIClass &spi);
SX128xInterface(LockingArduinoHal *hal, RADIOLIB_PIN_TYPE cs, RADIOLIB_PIN_TYPE irq, RADIOLIB_PIN_TYPE rst,
RADIOLIB_PIN_TYPE busy);
/// Initialise the Driver transport hardware and software.
/// Make sure the Driver is properly configured before calling init().

42
src/modules/ExternalNotificationModule.cpp
Wyświetl plik

@ -8,6 +8,17 @@
#include "mesh/generated/meshtastic/rtttl.pb.h"
#include <Arduino.h>
#include "main.h"
#ifdef RAK4630
#include <NCP5623.h>
NCP5623 rgb;
uint8_t red = 0;
uint8_t green = 0;
uint8_t blue = 0;
#endif
#ifndef PIN_BUZZER
#define PIN_BUZZER false
#endif
@ -73,6 +84,15 @@ int32_t ExternalNotificationModule::runOnce()
millis()) {
getExternal(2) ? setExternalOff(2) : setExternalOn(2);
}
#ifdef RAK4630
if (rgb_found.type == ScanI2C::NCP5623) {
green = (green + 50) % 255;
red = abs(red - green) % 255;
blue = abs(blue / red) % 255;
rgb.setColor(red, green, blue);
}
#endif
}
// now let the PWM buzzer play
@ -84,6 +104,7 @@ int32_t ExternalNotificationModule::runOnce()
rtttl::begin(config.device.buzzer_gpio, rtttlConfig.ringtone);
}
}
return 25;
}
}
@ -106,6 +127,11 @@ void ExternalNotificationModule::setExternalOn(uint8_t index)
digitalWrite(output, (moduleConfig.external_notification.active ? true : false));
break;
}
#ifdef RAK4630
if (rgb_found.type == ScanI2C::NCP5623) {
rgb.setColor(red, green, blue);
}
#endif
}
void ExternalNotificationModule::setExternalOff(uint8_t index)
@ -126,6 +152,15 @@ void ExternalNotificationModule::setExternalOff(uint8_t index)
digitalWrite(output, (moduleConfig.external_notification.active ? false : true));
break;
}
#ifdef RAK4630
if (rgb_found.type == ScanI2C::NCP5623) {
red = 0;
green = 0;
blue = 0;
rgb.setColor(red, green, blue);
}
#endif
}
bool ExternalNotificationModule::getExternal(uint8_t index)
@ -200,6 +235,12 @@ ExternalNotificationModule::ExternalNotificationModule()
LOG_INFO("Using Pin %i in PWM mode\n", config.device.buzzer_gpio);
}
}
#ifdef RAK4630
if (rgb_found.type == ScanI2C::NCP5623) {
rgb.begin();
rgb.setCurrent(10);
}
#endif
} else {
LOG_INFO("External Notification Module Disabled\n");
disable();
@ -300,7 +341,6 @@ ProcessMessage ExternalNotificationModule::handleReceived(const meshtastic_MeshP
nagCycleCutoff = millis() + moduleConfig.external_notification.output_ms;
}
}
setIntervalFromNow(0); // run once so we know if we should do something
}

2
variants/diy/platformio.ini
Wyświetl plik

@ -11,7 +11,7 @@ build_flags =
-I variants/diy/v1
; Meshtastic DIY v1.1 new schematic based on ESP32-WROOM-32 & SX1262/SX1268 modules
[env:meshtastic-diy-v1.1]
[env:meshtastic-diy-v1_1]
extends = esp32_base
board = esp32doit-devkit-v1
board_level = extra

2
variants/heltec_v2.1/platformio.ini
Wyświetl plik

@ -1,4 +1,4 @@
[env:heltec-v2.1]
[env:heltec-v2_1]
;build_type = debug ; to make it possible to step through our jtag debugger
extends = esp32_base
board = heltec_wifi_lora_32_V2

2
variants/heltec_v2/platformio.ini
Wyświetl plik

@ -1,4 +1,4 @@
[env:heltec-v2.0]
[env:heltec-v2_0]
;build_type = debug ; to make it possible to step through our jtag debugger
extends = esp32_base
board = heltec_wifi_lora_32_V2

3
variants/heltec_wsl_v3/variant.h
Wyświetl plik

@ -1,3 +1,6 @@
#define I2C_SCL 47
#define I2C_SDA 48
#define LED_PIN LED
#define HAS_SCREEN 0

1
variants/rak4631/platformio.ini
Wyświetl plik

@ -9,6 +9,7 @@ lib_deps =
${networking_base.lib_deps}
melopero/Melopero RV3028@^1.1.0
https://github.com/RAKWireless/RAK13800-W5100S.git#1.0.2
rakwireless/RAKwireless NCP5623 RGB LED library@^1.0.2
debug_tool = jlink
; If not set we will default to uploading over serial (first it forces bootloader entry by talking 1200bps to cdcacm)
;upload_protocol = jlink

1
variants/rak4631_epaper/platformio.ini
Wyświetl plik

@ -8,6 +8,7 @@ lib_deps =
${nrf52840_base.lib_deps}
zinggjm/GxEPD2@^1.4.9
melopero/Melopero RV3028@^1.1.0
rakwireless/RAKwireless NCP5623 RGB LED library@^1.0.2
debug_tool = jlink
; If not set we will default to uploading over serial (first it forces bootloader entry by talking 1200bps to cdcacm)
;upload_protocol = jlink

1
variants/rak4631_epaper_onrxtx/platformio.ini
Wyświetl plik

@ -10,6 +10,7 @@ lib_deps =
${nrf52840_base.lib_deps}
zinggjm/GxEPD2@^1.5.1
melopero/Melopero RV3028@^1.1.0
rakwireless/RAKwireless NCP5623 RGB LED library@^1.0.2
debug_tool = jlink
; If not set we will default to uploading over serial (first it forces bootloader entry by talking 1200bps to cdcacm)
;upload_protocol = jlink

2
variants/tbeam_v07/platformio.ini
Wyświetl plik

@ -1,5 +1,5 @@
; The original TBEAM board without the AXP power chip and a few other changes
[env:tbeam0.7]
[env:tbeam0_7]
extends = esp32_base
board = ttgo-t-beam
board_level = extra

2
variants/tlora_v2_1_16/platformio.ini
Wyświetl plik

@ -1,4 +1,4 @@
[env:tlora-v2-1-1.6]
[env:tlora-v2-1-1_6]
extends = esp32_base
board = ttgo-lora32-v21
build_flags =

2
variants/tlora_v2_1_18/platformio.ini
Wyświetl plik

@ -1,4 +1,4 @@
[env:tlora-v2-1-1.8]
[env:tlora-v2-1-1_8]
extends = esp32_base
board = ttgo-lora32-v21

2
version.properties
Wyświetl plik

@ -1,4 +1,4 @@
[VERSION]
major = 2
minor = 1
build = 11
build = 12