mirror
/
meshtastic-firmware
kopia lustrzana https://github.com/meshtastic/firmware
1
0
Forkuj 1
Kod Zgłoszenia Packages Projekty Wydania Wiki Aktywność
7 662 Commity
19 Gałęzie
243 Tagi
75 MiB
Wykres commitów

535 Commity (master)

Autor SHA1 Wiadomość Data
Ben Meadors 8255128eae Trunk finally spilled the beans about what it's upset about 2023-09-09 19:40:57 -05:00
Ric In New Mexico d7a98519f4
Update variant.h (#2778) 
* Update variant.h

Add second i2c channel on external connector for Station G1

* Create trunk-check.yml

---------

Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
 2023-09-09 19:37:35 -05:00
Ben Meadors dcdf9b64de
Ambient lighting (#2779) 
* This was already defined and throwing a ton of warnings

* Ambient lighting module feature

* Use local instance type
 2023-09-07 12:24:47 -05:00
tropho23 ffcb131171
GPS toggle for RAK4631 (patch 2 of 2) (#2764) 
* Added triple-press GPS toggle button changes

* Revert edits to extensions.json

* comma'd

* Update variant.h

Added the line:

// Define pin to enable GPS toggle (set GPIO to LOW) via user button triple press
#define PIN_GPS_EN 34 // GPS power enable pin

---------

Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: code8buster <communismisgreat@national.shitposting.agency>
 2023-09-04 13:17:01 -05:00
tropho23 bb1fe7cad3
GPS toggle for RAK4631 (patch 1 of 2) (#2763) 
* Added triple-press GPS toggle button changes

* Revert edits to extensions.json

* comma'd

* Update platformio.ini

Added line:

-DGPS_POWER_TOGGLE ; comment this line to disable triple press function on the user button to turn off gps entirely.

---------

Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: code8buster <communismisgreat@national.shitposting.agency>
 2023-09-04 13:16:39 -05:00
Mark Trevor Birss 00ffe73ebd
Heltec ESP32-C3 HT-CT62 support (#2741) 
* Add files via upload

* Update platformio.ini

* Update variant.h

* Update platformio.ini

* Switch to our new HW_MODEL

---------

Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: Ben Meadors <thebentern@tuta.io>
 2023-08-23 07:59:21 -05:00
Thomas Göttgens 762166495f
Merge branch 'master' into raspi-portduino 2023-08-17 10:06:34 +02:00
Thomas Göttgens 5d76771fab
Permanently Enable Canned Messages on T-Deck and Picomputer (#2728) 
* - Permanently Enable Canned Messages on T-Deck and Picomputer
- picomputer has a really dark TFT; switch color to white for better UX.

* well, you know... bullock...
 2023-08-16 15:07:22 -05:00
rcarteraz 18899fd168
Update variant.h (#2719) 
remove HAS_GPS 0 so users can add gps

Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
 2023-08-13 23:45:23 -05:00
Thomas Göttgens b5b66f43f2
Merge branch 'master' into raspi-portduino 2023-08-09 11:19:23 +02:00
mverch67 1d0ac2caf7 trunk fmt 2023-08-08 18:55:00 +02:00
mverch67 746d7268a2 fix picomputer 2023-08-08 18:51:11 +02:00
Manuel 9a7777dbdb
Merge branch 'master' into t-watch-fixes 2023-08-08 18:21:57 +02:00
mverch67 0fe99b0caa T-Watch fixes 2023-08-08 18:06:39 +02:00
Thomas Göttgens 4808a5c57f
also update other boards with those (#2691) 2023-08-07 23:22:17 +00:00
Thomas Göttgens d25c368985
Try enabling the secondary I2C bus on Heltec V3 (#2689) 
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
 2023-08-07 15:17:26 -05:00
Thomas Göttgens ed4e7a4cee
Change Target Name 2023-08-07 21:33:42 +02:00
Thomas Göttgens 402f8ba524 Let's see what this breaks... 2023-08-07 19:34:42 +02:00
Thomas Göttgens 8552cc44b9
Merge branch 'master' into picomputer-s3 2023-08-06 16:55:28 +02:00
Thomas Göttgens 684cce7640 trunk fmt 2023-08-06 16:53:37 +02:00
Thomas Göttgens 0aef8703b6 - use LovyanGFX for m5stack 
- update some comments
 2023-08-06 16:47:55 +02:00
Mark Trevor Birss 400b71c152 Update variant.h 2023-08-05 17:42:51 +02:00
Mark Trevor Birss b1f6ff1280 Update variant.h 2023-08-05 17:42:51 +02:00
Thomas Göttgens 1e71d346ae
Merge branch 'master' into raspi-portduino 2023-08-03 21:36:43 +02:00
Thomas Göttgens 4e54bec525
Force small fonts on Low DPI screens, no matter what the driver default uses. Up till now we assumed large fonts on E-Paper and TFT Screens. (#2677) 2023-08-03 06:58:19 -05:00
Ben Meadors 919b2d1e48
Merge branch 'master' into raspi-portduino 2023-07-31 19:00:00 -05:00
Thomas Göttgens 26338b8f2b
Merge branch 'master' into picomputer-s3 2023-07-31 22:27:24 +02:00
Manuel 502a6596a3
T deck: support keyboard, trackball and touchscreen (#2665) 
* add hwid for auto-detection

* fix: heltec-wireless-tracker USB serial

* T-Deck support

* trunk fmt

* set FRAMERATE to 1

* fix some defines

* trunk fmt

* corrected vendor link

* T-Deck: support keyboard, trackball & touch screen

* T-Watch add touchscreen defs, remove getTouch

* fix warnings

* getTouch uint16 -> int16

* fix touch x,y

* fix I2C port

* CannedMsgModule: use entire display height

* trunk fmt

* fix I2C issue for T-Watch

* allow dest selection in canned mode

* fix: allow dest selection in canned mode

* use tft.setBrightness() to poweroff display

* Increased t-watch framerate and added back haptic feedback

* add da ref

* Move to touched

* improved sensitivity and accuracy of touch events

* use double tap to send canned message

* fix warning

* trunk fmt

* Remove extra hapticFeedback()

---------

Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
 2023-07-30 07:51:26 -05:00
Neil Hao b9c9f0f865
nano-g2-ultra (#2660) 
* 'nano-g2-ultra'

* revert overcommit

* nano-g2-ultra-fmt

* revert overcommit

* revert overcommit

---------

Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
 2023-07-29 07:54:56 -05:00
GUVWAF ffcc1a0275
RP2040: Enable ExternalNotification and RangeTest Module, set randomSeed (#2664) 
* Enable ExternalNotification (and RangeTest) Module

* Set a random seed at boot
 2023-07-29 07:19:58 -05:00
Thomas Göttgens 171cca435e
Merge branch 'master' into raspi-portduino 2023-07-24 11:00:58 +02:00
Ben Meadors 470363d294
Update Hydra to use new TXEN->DIO2 macro (#2636) 2023-07-22 18:59:33 -05:00
Ben Meadors 0739bc0cea
T-Watch S3 Support (#2632) 
* T-Watch WIP

* Updates

* Temp

* Update screen spi bus and and backlight en

* Peripherals progress

* Fixes

* Fixes

* Updates

* DRV scaffolding

* Fixed touch-screen driver selection. WIP on DRV haptic feedback

* DRV2605 pmu channel

* Trunk

* Fixes and defaults

* Dropped an s

* Move PMU and turn off screen that way

* Add t-deck and t-watch-s3 to CI and cleanup

* More cleanup
 2023-07-22 09:26:54 -05:00
andrew-moroz 1c74479555
xiao-ble: add initial support for the Xiao BLE + Ebyte E22-900M30S (#2633) 
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
 2023-07-21 20:37:00 -05:00
Manuel 2486892e6d
Basic T-Deck support (#2630) 
* add hwid for auto-detection

* fix: heltec-wireless-tracker USB serial

* T-Deck support

* trunk fmt

* set FRAMERATE to 1

* fix some defines

* trunk fmt

* corrected vendor link
 2023-07-19 08:13:51 -05:00
Ben Meadors eb7025f1b1
Add Hydra specific target to define GPS EN pin and limit tx power (#2608) 
* Use DIO2 bridged to TXEN and remove TX/RXEN pin switching altogether

* Add Hydra specific target to limit tx power and define GPS EN

* Whoops
 2023-07-18 07:09:55 -05:00
tropho23 5995c7060d
Added triple-press GPS toggle button changes for select ESP32 devices (#2617) 
* Added triple-press GPS toggle button changes

* Revert edits to extensions.json

* comma'd

---------

Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: code8buster <communismisgreat@national.shitposting.agency>
 2023-07-17 18:55:40 -05:00
Manuel 541291cc70
resolve heltec-wireless-tracker serial issue (#2621) 
* add hwid for auto-detection

* fix: heltec-wireless-tracker USB serial
 2023-07-17 13:06:34 -05:00
Mark Trevor Birss 4306c32349
Update variant.h (#2620) 
Update M5Stack CoreInk enable GPS/BDS

Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
 2023-07-17 09:20:42 -05:00
Manuel ab32503601
Heltec-Tracker: GPS support (#2615) 
* Heltec-Tracker: GPS support

* trunk fmt

---------

Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
 2023-07-16 16:57:14 -05:00
Manuel c75965480f
Heltec-Tracker: TFT LCD support (#2612) 
* Heltec-Tracker: TFT LCD support

* trunk fmt

* backwards compatibility  with ST7735 devices

* trunk fmt
 2023-07-15 08:53:26 -05:00
Ben Meadors 4ace59fc18
Partial Heltec Wireless Paper and Wireless Tracker support (#2594) 
* WIP

* Comment

* WIP

* TFT_CTRL

* Update platformio.ini

update to current latest version available

* Update EInkDisplay2.cpp

Is the e-ink Display a DEPG0213BN ?

* Logging

* trunk fmt

---------

Co-authored-by: Mark Trevor Birss <markbirss@gmail.com>
 2023-07-14 16:12:30 -05:00
Ben Meadors de53280ffc
PIN_GPS_EN power toggling (#2592) 
* PIN_GPS_EN

* Remove extra digitalWrite

* GPS_POWER_TOGGLE macro enabled. Added WSLv3 too

* Update variant.h

* Update variant.h

* Fixed macro guard
 2023-07-08 21:01:00 -05:00
GUVWAF d8ad2b3f48
RPi Pico screen, CannedMessageModule (CardKB) and reboot support (#2595) 
* Make input_source case insensitive

* Implement reboot for RP2040

* Remove EXT_NOTFIFY_OUT as it conflicts with I2C and module is not supported

* RP2040 has screen, button and wire

* Add default I2C pins also for Pico W
 2023-07-08 11:32:36 -05:00
Dmitry Galenko 9c141919f6
Initial support for MonteOps's fixed hardware platform (#2582) 
* Initial support for MonteOps's fixed hardware platform

* Update platformio env config + cleanup

* Fix platformio build

* Fix platformio build

* Fix wrong definition logic for NCP5623

* Fix another wrong definition logic for NCP5623, it's not board feature

* Fix wrong definition logic for NCP5623 in External Notification code, it's not board feature

* We need for CI magic here

* Another fix related to NCP5623

* Fix cosmetic issue with redifined variable

* Fix typo

* Cleanup and update defs for HW1

* Fix OEM RAK4631

* Fix AQ sensor reading

* Fix AQ sensor reading (better variant)

* Fix build for other nRF52 devices

* Replace HAS_EINK_RAK to RAK_4631
 2023-07-03 09:34:32 -05:00
Thomas Göttgens e878f55ed3
Merge branch 'master' into raspi-portduino 2023-06-27 18:13:24 +02:00
Thomas Göttgens bfc567ad89 Add variant an plumbing for #2468 2023-06-27 18:11:58 +02:00
Ben Meadors e677a02273
Map built-in LED on RAK-11310 (#2568) 2023-06-21 12:11:42 -05:00
Ben Meadors f71869215d
Set pin for RAK-12039 to allow I2C auto-detect (#2555) 
* SET pin for RAK-12039 and put back macaddr for now

* Guard against epaper RAK variant

* Update main.cpp

* Add these back
 2023-06-09 05:58:58 -05:00
Ben Meadors a491ceefcd
Wio-e5 wip (#2265) 
* Wio-e5 / STM32WL wip

* Stubbing some FS stuff out

* Wio-e5 / STM32WL wip

* Stubbing some FS stuff out

* Wio-e5 / STM32WL wip

* Stubbing some FS stuff out

* Wio-e5 / STM32WL wip

* Stubbing some FS stuff out

* LittleFS compiles. Can't check with actual device.

* make cppcheck happy again

* Guard against accelerometer thread

* Missed a spot

* Upload via ST-LINK

* Derive MAC address from UID

* upload port

* Trunk it

* Guard it

* Maybe fix the cache error on startup.

* Latest RadioLib ref to fix SubGHZ

* revert nasty Sub-GHz Hack

* Boots and radio inits with RadioLib 6.0, LittleFS doesn't seem to work

---------

Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com>
Co-authored-by: GUVWAF <thijs@havinga.eu>
 2023-06-01 07:14:55 -05:00
GUVWAF e699427bfc
RP2040: Enable telemetry and update HW models (#2525) 2023-05-28 10:30:54 -05:00
GUVWAF 35ee12cb4c
RP2040: Use Pico SDK USB stack instead of TinyUSB (#2523) 
Seems to fix freeze, serial output still stops after a while
 2023-05-27 19:22:26 -05:00
code8buster 7475c8647c
2.5dB could be a more appropriate attenuation for heltec ADCs (#2511) 
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
 2023-05-26 06:16:40 -05:00
Ben Meadors 2728e86aab No longer are you extras, my friends 2023-05-24 07:08:22 -05:00
Thomas Göttgens 1dfa8f2d9e
RAK11310 (#2299) 
* POC. Board definition JSON upcoming. Generic for now

* side-effect: RP2040 is building again.

* WIP Pico Targets

* current state of affairs

* ahem

* POC. Board definition JSON upcoming. Generic for now

* side-effect: RP2040 is building again.

* WIP Pico Targets

* current state of affairs

* ahem

* fmt

* update toolkit and fmt

* Add built in LED pin

* Use arduino pins

* init SPI bus on right pins.

* Use SPI1 and control chip select manually

* Use macro define for SPI selection. This needs to be defined in the ini file since portduino needs it inside the framework source

* Remove manual CS; works when not using setCS()

* Remove whoopsie debug line

* we are not ARDUINO_AVR_NANO_EVERY any more

* fix rp2040 compilation

* fix RadioLibHAL

* Use new arduino-pico core

* Use cortex-m0plus for BSEC2 library

* Forgot RAK11310 target for BSEC2 library

* That branch was merged

* RAK11310 is working too

---------

Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: GUVWAF <thijs@havinga.eu>
 2023-05-23 16:19:36 -05:00
Ben Meadors 9bee35118f
Merge branch 'master' into raspi-portduino 2023-05-18 06:47:56 -05:00
code8buster 9878ff3836 Tryfix datatype errors 2023-05-16 21:46:55 +02:00
code8buster 3219ad33ef Add ADC channels to esp variants, plug code back in to make sure other archs work 2023-05-16 21:46:55 +02:00
code8buster d11bcda292 Implementing a calibrated ESP32 ADC reading 2023-05-16 21:46:55 +02:00
Ben Meadors f7e1f4cea6 Fix hydra (for real this time) 2023-05-11 19:56:55 -05:00
Ben Meadors 75504793e8 Skip setting dio2 as rf switch altogether if txen is defined 2023-05-11 06:52:27 -05:00
Thomas Göttgens 80f029aa32
Merge branch 'master' into raspi-portduino 2023-05-10 17:13:32 +02:00
Thomas Göttgens 70dc13a998 use BSEC2 only 2023-05-10 14:14:48 +02:00
Thomas Göttgens 9841d49fb8
Merge branch 'master' into BSEC2 2023-05-10 13:31:46 +02:00
rcarteraz 0e15d6a5c2
Update Heltec WSL variant.h to add I2C definitions. (#2475) 2023-05-09 19:30:43 -05:00
Thomas Göttgens 6963e43e9f Platformio 6.1.7 doesn't like dots in env names any more. 2023-05-08 20:28:11 +02:00
Thomas Göttgens b75aa79da5
Merge branch 'master' into raspi-portduino 2023-05-08 10:32:36 +02:00
Ben Meadors 09d48f659e
RAK14001 RGB LED support (#2464) 
* WIP

* WIP

* Moved it

* More random strobey behavior

* Guard to RAK4630 devices for now

* Oops

* Ship it
 2023-05-06 07:17:40 -05:00
Thomas Göttgens 10f41e376c use BSEC2 for ESP32-C3 2023-05-05 18:09:06 +02:00
Manuel Verch 7c9d0a022a fix AI C3 DevKit-M configuration 2023-05-05 09:39:22 +02:00
Ben Meadors a6385a522d
Disable TX/RX EN in favor of power EN over TX_EN (#2456) 
* Disable TX/RX EN in favor of power EN over TX_EN

* Oops
 2023-05-03 06:24:09 -05:00
Mark Trevor Birss a27d354364
Add board - BPI PicoW ESP32-S3 SX1262 (#2450) 
* Add files via upload

* Add files via upload
 2023-05-01 07:12:00 -05:00
Thomas Göttgens 85818b8dfd
Merge branch 'master' into raspi-portduino 2023-04-21 16:50:48 +02:00
Thomas Göttgens 10fac072bb move codec2 repo to org 2023-04-12 14:39:25 +02:00
Thomas Göttgens 14080d4667
Merge branch 'master' into raspi-portduino 2023-04-02 21:24:49 +02:00
Vladislav Osmanov 6bf538e26f `EXT_PWR_DETECT` pin to detect external power source for boards without the power management chip 2023-04-02 11:35:25 +02:00
Thomas Göttgens 82ba59765c trunk it baby 2023-03-29 13:41:45 +02:00
Mark Trevor Birss 7930aa1635 Update platformio.ini 2023-03-29 13:41:45 +02:00
Mark Trevor Birss c55751964e Update platformio.ini 2023-03-29 13:41:45 +02:00
Mark Trevor Birss b9b1cce6a5 Update platformio.ini 2023-03-29 13:41:45 +02:00
Mark Trevor Birss 044ef75fef Update platformio.ini 2023-03-29 13:41:45 +02:00
Mark Trevor Birss 9f940139a0 Update platformio.ini 2023-03-29 13:41:45 +02:00
Mark Trevor Birss 790df42987 Add files via upload 2023-03-29 13:41:45 +02:00
Thomas Göttgens 8a806efb95
Merge branch 'master' into raspi-portduino 2023-03-27 15:30:05 +02:00
Thomas Göttgens 2c259b8464 Add Power Restraint for 1280 PA Model 
Add Debug Print for all module parameters
Add RX/TX Switch to 1280
 2023-03-24 16:57:30 +01:00
Thomas Göttgens 75db8c2d2e the target starts up and works for a few seconds before crashing. Good enough for others to continue the work :-) 2023-03-21 16:24:24 +01:00
Ben Meadors 5e779bfb33
Merge branch 'master' into raspi-portduino 2023-03-16 14:43:23 -05:00
andrekir c9686d2f62 remove `PIN_EINK_EN` from RAK4631 variants 2023-03-12 19:29:12 +01:00
Andre K 634251834f fix rak4631_epaper PIN_EINK_EN 
revert 088ab106dd
 2023-03-12 19:29:12 +01:00
Ben Meadors e737a22120
Platform updates (#2340) 
* 6.1.0

* Update libs

* Update nrf52 while we're at it

* Remove temporary heltec platform packages

* Update install scripts to flash s3 ota partition bin
 2023-03-09 12:45:38 -06:00
A. Rager e6d69e2b67
Refactor i2cScan.h To Handle 2 Bus (#2337) 
* Break i2cScan out into a set of classes for scanning i2c

* refactor i2cscan addresses to be structs that allow addressing by port + address

* build whoopsies

* trunk fmt

* trunk fmt

* lost some build fixes from the merge

* more cleaning for build safety, RTC behavior
 2023-03-08 21:13:46 -06:00
Thomas Göttgens 267db05d69 - G1 Explorer use correct display controller 
- adhere UA font in modules
 2023-03-08 17:12:25 +01:00
Thomas Göttgens 4a0dfb5401 T3S3-1.1 SX1276 config (and cosmetic change for SX1280 in PA mode) 2023-03-04 18:39:19 +01:00
Thomas Göttgens 498964e04e
Merge branch 'master' into raspi-portduino 2023-03-04 17:24:37 +01:00
A. Rager 214feb1f21
Add Hardware: BetaFPV 900 Nano TX (#2249) 
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
 2023-03-01 08:36:25 -06:00
Manuel 9008c75517
Fixed: Tlora-t3s3-v1 SX1262 firmware reboots continuously (#2308) (#2315) 2023-02-28 07:45:10 -06:00
Thomas Göttgens 7d0bea267a
Merge branch 'master' into raspi-portduino 2023-02-22 10:08:20 +01:00
GUVWAF 95bbcd2cb7
Use LORA_DIO1 as RadioLib GPIO for SX127x chips (#2290) 
* When channel is active, first try receiving that packet
Afterwards we'll try transmitting again

* Remove setStandby in startSend
Already done in isChannelActive()

* Set LORA_DIO1 as RadioLib GPIO for SX127x

* LORA_DIO1 for Heltec v1, overlaps with GPS_TX
Set to RADIOLIB_NC for now

* If receive was not successful, startReceive doesn't trigger the interrupt
So we have to go back to transmitting anyway

---------

Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
 2023-02-20 07:40:44 -06:00
neil b33632f21a 'nano-g1-explorer' 2023-02-18 04:49:37 +08:00
Thomas Göttgens ed1aa9ddb0
Merge branch 'master' into raspi-portduino 2023-02-17 12:34:00 +01:00
Ben Meadors 09f2ea8938 Portduino isn't extra. It's extra special 2023-02-10 07:47:43 -06:00
Thomas Göttgens 83e309f3bf label boards as secondary to split the core firmware archive by support level. 
Ref: https://docs.platformio.org/en/latest/scripting/examples/platformio_ini_custom_options.html
 2023-02-10 01:35:25 +01:00
GUVWAF a5b99ee5d5 Try other location 2023-02-07 20:05:40 +01:00
GUVWAF 4a0c341438 Make Portduino build again 2023-02-07 19:40:15 +01:00
Ben Meadors 9522d4d2f5 Make a pie? 2023-02-07 07:17:32 -06:00
Thomas Göttgens 472c43aace Merge remote-tracking branch 'remotes/origin/master' into raspi-portduino 2023-02-02 10:49:45 +01:00
Ben Meadors cb3d5a5748 Comment about external PA module boards 2023-01-25 15:48:42 -06:00
Ben Meadors f1fd41a378 Add to Eink target as well 2023-01-25 11:48:11 -06:00
Ben Meadors ca91447c0e For science! 2023-01-25 10:10:09 -06:00
Ben Meadors 2c1b7840c5 Make this pr great again 2023-01-23 09:22:40 +01:00
Thomas Göttgens e9acf413fb After thoroughly reading schematics and documentation, i conclude that this is theoretically the right definition for this hookup. 2023-01-23 09:22:40 +01:00
Ben Meadors 266c61065d I swear I did this before you butthole 2023-01-21 19:51:24 -06:00
Ben Meadors e2e7658789 w/e 2023-01-21 19:24:33 -06:00
Thomas Göttgens 51b2c431d9 trunk roundhouse kick 2023-01-21 21:23:24 +01:00
Ben Meadors 7e27729dae Remove HAS_GPS for WSLv3 2023-01-15 08:24:20 -06:00
Thomas Göttgens 5fd00b2538 - make a template class for API Server 
- Skip a lot of duplicate code
- add a hexDump output - might come in handy
- refactor directory names
- remove unused debugOut that was generating template errors
 2023-01-09 17:03:52 +01:00
Thomas Göttgens 49172e416e
Merge pull request #2108 from markbirss/develop 
Add initial support for BETAFPV ELRS Micro TX Module 2.4G with ESP32 CPU
 2023-01-07 22:50:04 +01:00
Mark Trevor Birss 4d7402839e
Update platformio.ini 2023-01-07 16:00:27 +02:00
Mark Trevor Birss c98dc4cae0
Update variant.h 2023-01-07 13:48:35 +02:00
Mark Trevor Birss f21212dd3e
Update platformio.ini 2023-01-07 13:23:33 +02:00
Mark Trevor Birss 0e0ccad489
Update variant.h 2023-01-07 13:22:32 +02:00
Mark Trevor Birss 9f1c77da76
Create variant.h 2023-01-07 13:01:14 +02:00
Mark Trevor Birss 7c1c49b8ab
Create platformio.ini 2023-01-07 13:00:50 +02:00
Ben Meadors f4099261df Hydra gps troubleshooting 2023-01-06 15:04:11 -06:00
Thomas Göttgens 8c20fe5ec4 Start working on RF95 attached to Raspberry Pi 2022-12-30 21:44:51 +01:00
Thomas Göttgens 94cb100e3f Master to Develop 2022-12-28 15:30:23 +01:00
Thomas Göttgens e25d05689b Updates to external notification and radiolib for SX128x. Rip out Godmode again for these 2022-12-28 14:57:40 +01:00
Thomas Göttgens 430908f5d6 TLORA_T3_S3 2022-12-28 13:56:56 +01:00
Ben Meadors 28b954017f Copy pasta 2022-12-22 14:55:32 +01:00
Ben Meadors 16d826d6c7 Move to upstream espressif arduino 2022-12-22 14:55:32 +01:00
Thomas Göttgens d566457f0c Merge remote-tracking branch 'remotes/origin/master' into develop 2022-12-18 14:07:20 +01:00
Thomas Göttgens c577e09183
Merge branch 'develop' into gps-toggle-final 2022-12-16 20:58:53 +01:00
Thomas Göttgens 72f1416b30 add variant comment about radiolib 2022-12-16 20:21:56 +01:00
code8buster f2229e6977 Decrease click time window to avoid spurious double press detections while cycling windows quickly, build power toggle by default 2022-12-15 11:08:37 -05:00
Mark Trevor Birss 088ab106dd
Update variant.h 2022-12-14 17:57:02 +02:00
Mark Trevor Birss 110c3f619a
Update variant.h 2022-12-14 17:56:44 +02:00
ghostop14 59ec7f31ab Enable GPS capabilities on heltec V3 2022-12-13 12:31:39 -05:00
Thomas Göttgens 5fbc630061 add IO7 to RAK pinouts - only comments changed 2022-12-11 21:17:46 +01:00
code8buster 911083c49d Adds a flag to turn the GPS power rail off entirely on tbeam 2022-12-04 01:57:00 -05:00
Thomas Göttgens bba6bf387e hopefully fix compilation errors 2022-11-29 14:35:46 +01:00
Thomas Göttgens 4d32f7c5ad WIP: audio module still does not work, but enabled for all regions where audio is permitted. 2022-11-29 11:22:18 +01:00
Thomas Göttgens c7681cb24d update board definition, update copy/paste errors, fix SX1280. 2022-11-27 14:03:50 +01:00
Ben Meadors 47a47f1e69
Merge branch 'master' into develop 2022-11-26 08:18:35 -06:00
Ben Meadors 84a9d95b1f
Merge branch 'master' into MESSAGES 2022-11-26 06:43:52 -06:00
Ihor Nehrutsa 6507683909 Squashed commit of the following: 
commit c8d1bcf04fae5f7ac5b639ddd15a738045014c95
Author: Ihor Nehrutsa <Ihor.Nehrutsa@gmail.com>
Date:   Fri Nov 25 15:11:18 2022 +0200

    Revert "variants\tbeam\variant.h: Use LORA_CS instead of RF95_NSS"

    This reverts commit 8d225ced9c.

commit 1c37097448393ea9364c2b9bf10522802c61d5c4
Author: Ihor Nehrutsa <Ihor.Nehrutsa@gmail.com>
Date:   Fri Nov 25 15:04:09 2022 +0200

    Some little debugs added

commit f1b55e11af
Author: Ihor Nehrutsa <Ihor.Nehrutsa@gmail.com>
Date:   Wed Nov 23 15:24:58 2022 +0200

    Update variant.h

commit 8d225ced9c
Author: Ihor Nehrutsa <Ihor.Nehrutsa@gmail.com>
Date:   Wed Nov 23 13:06:49 2022 +0200

    variants\tbeam\variant.h: Use LORA_CS instead of RF95_NSS
 2022-11-25 15:17:24 +02:00
Thomas Göttgens 025d2264a2 m5stack runs with native tone support now. 2022-11-24 10:44:43 +01:00
Thomas Göttgens 5f8267c956 use the buzzer for external notification module 2022-11-24 10:11:42 +01:00
Mark Trevor Birss b3c396683e
Update platformio.ini 2022-11-23 21:25:19 +02:00
Mark Trevor Birss f08874dd37
Update platformio.ini 2022-11-23 21:24:34 +02:00
Mark Trevor Birss 648054da9b
Add files via upload 2022-11-23 21:19:20 +02:00
Ben Meadors 00bc762bf1
Merge branch 'master' into develop 2022-11-21 09:38:46 -06:00
Thomas Göttgens 3b2b0bdc97
fix TLora V1 Boards Display Init 2022-11-21 15:50:47 +01:00
Ben Meadors 53cd6bdf15
Merge branch 'master' into develop 2022-11-21 07:35:46 -06:00
Ben Meadors b23c364fc0 Test it this way 2022-11-15 16:22:53 -06:00
Thomas Göttgens 5bfc58ed64 testing issues with RAK11200/13300 2022-11-15 21:55:27 +01:00
Thomas Göttgens b5ebfa9cc3 Portduino WIP 2022-11-15 07:59:01 +01:00
Thomas Göttgens 79eff42c3c Fix and Break radiolib 2022-11-14 10:53:16 +01:00
Thomas Göttgens 50a301899e start to sort radiolib out. If we have macros, use them! :-) 
Also we need Godmode for the SX1280 for now, hopefully can revert to more sane operation.
 2022-11-14 09:49:50 +01:00
Ben Meadors 6e856efd0e
Merge branch 'master' into develop 2022-11-13 14:45:48 -06:00
Ben Meadors 8d4c526d16 Add Heltec Wireless Stick Lite V3 support 2022-11-13 13:28:02 -06:00
Ben Meadors 33cd5ce6c1 Cleanup 2022-11-13 09:48:38 -06:00
Ben Meadors f22c2e768e Reorder 2022-11-13 09:47:55 -06:00
Ben Meadors 3d7dea0606 Added support for Heltec V3 2022-11-13 09:45:16 -06:00
Thomas Göttgens 7a67388a97 Merge branch 'master' of github.com:meshtastic/firmware into develop 2022-11-12 14:34:51 +01:00
lewishe dff6eeb90e Merge branch 'master' of https://github.com/lewisxhe/Meshtastic-device 2022-11-12 15:16:54 +08:00
lewishe b68a026627 Update tbeam-s3 variant mapping 2022-11-12 14:39:42 +08:00
Thomas Göttgens a6ea5496b4 Fixed DIO Pin mapping. SX1280 is working 2022-11-10 23:26:31 +01:00
Thomas Göttgens de0954f307 switch to upstream Ethernet lib 2022-11-10 09:35:56 +01:00
Ben Meadors 3562d34555 Remove flag 2022-11-06 18:22:52 +01:00
Ben Meadors 3ca6f645d4 Portduino build flags 2022-11-06 18:22:52 +01:00
Ben Meadors 950d5defda
Master to develop (resolves conflicts) (#1903) 
* Rearranging deck chairs, 900M22S working, 30S not

* We do have wire, just not where it's expected

* Put more of the module specific pins in their blocks

* tryfix compile with NO_SCREEN

* Portduino only: don't continue to try rebooting (#1887)

Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com>

* Support for TLORA 2.1-1.8

* Don't allow arbitrary channel name for admin (#1886)

Co-authored-by: Ben Meadors <benmmeadors@gmail.com>

* Experimental DIY nrf52840 feather support (#1884)

* Experimental DIY nrf52840 feather support

* Fix target

* sx1262 wiring

* Remove lib

* Don't consider Response as ACK for FloodingRouter (#1885)

Co-authored-by: Ben Meadors <benmmeadors@gmail.com>

* Fix feather diy (#1892)

* Fix variant

* Fix feather diy target

* [modules][external notifications] allow select channel to listen to

* Fix feather diy pin mapping (#1894)

Thanks to @markbirss

* [create-pull-request] automated change

* Override Screen Autodtect

* Maybe fix crash of this board.

* Fixes reset loop with new espressif32 platform on tlora-v2

 Sending a pulse to the OLED_RESET Pin 16 results in a reset loop using recent version of the espressif32 platform.

* Experiment with self hosted action runner

* Fix MQTT on ETH

* revert the tryfix

* Cheating

* Cleanup artifacts older than 1 month

* Update cleanup_artifacts.yml

* Update cleanup_artifacts.yml

* Update cleanup_artifacts.yml

* Delete cleanup_artifacts.yml

* fix: use RF95_IRQ for wakeup source in doLightSleep (#1899)

Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com>
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>

* Update protos

* Update protos

Co-authored-by: code8buster <communismisgreat@national.shitposting.agency>
Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com>
Co-authored-by: GUVWAF <78759985+GUVWAF@users.noreply.github.com>
Co-authored-by: Mykhailo Lesyk <m@lesyk.org>
Co-authored-by: Mykhailo Lesyk <lesykm@users.noreply.github.com>
Co-authored-by: caveman99 <caveman99@users.noreply.github.com>
Co-authored-by: he-leon <he-leon@users.noreply.github.com>
Co-authored-by: Lars Weber <weber@weber-software.com>
 2022-11-05 09:28:41 -05:00
Thomas Göttgens 09cdc20440 manual merge of changes from Master 2022-11-04 19:56:44 +01:00
Thomas Göttgens 09ddde177c codec2 Audio Support for SX1280 (untested) 2022-11-02 18:23:41 +01:00
Ben Meadors ef18b173cd Experimental DIY nrf52840 feather support (#1884) 
* Experimental DIY nrf52840 feather support

* Fix target

* sx1262 wiring

* Remove lib
 2022-11-02 18:19:09 +01:00
Thomas Göttgens 3e82cd7dd4 Support for TLORA 2.1-1.8 2022-11-02 18:19:09 +01:00
code8buster 0ce018cf97 Put more of the module specific pins in their blocks 2022-11-02 18:19:09 +01:00
code8buster 15a8710e69 We do have wire, just not where it's expected 2022-11-02 18:19:09 +01:00
code8buster cae75dcb6d Rearranging deck chairs, 900M22S working, 30S not 2022-11-02 18:19:09 +01:00
code8buster 1f9db0a8fe
Disaster.radio dev board support update (#1873) 
* Bringing changes from 1.2-legacy over to the new structure in 1.3/2.0

* Add meshtastic-dr-dev to CI artifact workflow
 2022-10-29 16:37:27 -05:00
Thomas Göttgens a1256818d9 update library location 2022-10-26 18:25:31 +02:00
Thomas Göttgens a66538fe55 MQTT is working over ethernet 2022-10-26 00:07:02 +02:00
Thomas Göttgens aab52f1e8d Merge branch 'master' of github.com:meshtastic/Meshtastic-device 2022-10-23 16:41:04 +02:00
Mykhailo Lesyk 41267a42f7
[rak4630] enable 3.3v periphery before scan for i2c devices (#1847) 
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
 2022-10-22 19:55:34 -05:00
Thomas Göttgens 103c82bc2c only build on vanilla RAK4631 for now. 2022-10-22 16:42:36 +02:00
Thomas Göttgens f3fee5f4fb first murmurs of ethernet support 2022-10-22 16:29:50 +02:00
Ben Meadors 1fc3c0af70
Update variant.h (#1814) 2022-10-17 08:07:18 -05:00
Thomas Göttgens 994e396c00 update Raspberry Pico Framework 2022-10-13 13:57:17 +02:00
Thomas Göttgens d4e65d8607 1.0.1 RTC LIB is released on PIO Registry 2022-10-08 11:09:16 +02:00
Thomas Göttgens 2d4bfe183c Merge branch 'master' of github.com:meshtastic/Meshtastic-device 2022-10-07 16:42:29 +02:00
lewis he 004f6fa4d6
Add t-beam-s3-core onboard device support. (#1764) 
* Change t-beam-s3-core pins definitions

* Add t-beam-s3-core power initialization to properly initialize the I2C device

* Add 6-axis and 3-axis sensor detection
 2022-10-07 06:57:55 -05:00
Thomas Göttgens 1d09beb8a7 word wrap long input and fix compiler warnings 2022-10-06 18:40:31 +02:00
Thomas Göttgens 7f935717db
Update platformio.ini 2022-10-06 08:56:02 +02:00
Thomas Göttgens 5b1d3a0c51
Update platformio.ini 2022-10-06 08:55:58 +02:00
andrekir 484f340023 update PCF8563_Library to 1.0.0 2022-10-06 01:05:21 -03:00
Thomas Göttgens 62498d0935 GPS Rollup, incorporates changes from @pmarches and @lewisxhe 2022-10-05 14:59:07 +02:00
Thomas Göttgens b148781e4b
Missed one. 2022-10-04 13:29:06 +02:00
Thomas Göttgens 39a51c7fbb
update lib to make this work 2022-10-04 13:26:20 +02:00
Thomas Göttgens 0fe99595a9 Lib update and fix include errors 2022-10-04 08:59:03 +02:00
Thomas Göttgens b2ff628cec add versioning to all lib depends (compatible upgrade allowed) and move as many as possible off github and into PIO registry. 
Also add a script to check for lib updates (maybe in CI?)
 2022-10-04 08:40:39 +02:00
Thomas Göttgens daf189bf4b Check in variant.h change 2022-09-29 13:23:23 +02:00