esp32_loraprs

Category	Dynamic param name	Compile time (default) config.h param name	Description
Compile time		USE_SX126X	SX126X module group is used when defined, otherwise SX127X module group is used
Compile time		MODULE_NAME	RadioLib module name, see https://github.com/jgromes/RadioLib/wiki/Modules
General	LogLevel	CFG_LOG_LEVEL	One of LogDebug library levels (`DebugLogLevel::LVL_INFO` default, set to `DebugLogLevel::LVL_TRACE` for sent/received data logging, set to `DebugLogLevel::LVL_NONE` to disable USB serial logging)
General	IsClientMode	CFG_IS_CLIENT_MODE	`true` - enable normal/client mode, `false` - run in APRS iGate mode
LoRa/FSK	LoraFreqRx	CFG_LORA_FREQ_RX	LoRa module RX frequency in Hz
LoRa/FSK	LoraFreqTx	CFG_LORA_FREQ_TX	LoRa module TX frequency in Hz (set to different values for split operation)
LoRa/FSK	LoraPower	CFG_LORA_PWR	Module output power in dBm (without external amplifier gain!)
LoRa	LoraBw	CFG_LORA_BW	LoRa module bandwidth in Hz
LoRa	LoraSf	CFG_LORA_SF	Spreading factor from 6 up to 12
LoRa	LoraCodingRate	CFG_LORA_CR	Coding rate from 5 up to 8
LoRa	LoraSync	CFG_LORA_SYNC	Sync word (usually 0x12 or 0x34)
LoRa	LoraCrc	CFG_LORA_CRC	0 - disable CRC, 1 - 1 byte, 2 - 2 bytes
LoRa	LoRaExplicit	CFG_LORA_EXPLICIT	`true` - explicit header mode, `false` - implicit header mode (always `false` for SF6)
LoRa	LoraPinSs	CFG_LORA_PIN_SS	SS/CS module pin number
LoRa	LoraPinRst	CFG_LORA_PIN_RST	RST module pin number
LoRa	LoraPinA	CFG_LORA_PIN_A	SX127x - set to DIO0, SX126x - set to DIO1
LoRa	LoraPinB	CFG_LORA_PIN_B	SX127x - set to DIO1, SX126X - set to BUSY
LoRa	LoraPinSwitchRx	CFG_LORA_PIN_RXEN	SX127x - not used, SX126X - set to RXEN pin
LoRa	LoraPinSwitchTx	CFG_LORA_PIN_TXEN	SX127x - not used, SX126X - set to TXEN pin
LoRa	LoraUseCad	CFG_LORA_USE_CAD	`true` - enable carrier sense (only for RadioLib library), `false` - disable carrier sense
FSK	FskBitRate	CFG_FSK_BIT_RATE	FSK bit rate in kHz, e.g. `4.8`
FSK	FskFreqDev	CFG_FSK_FREQ_DEV	FSK frequency deviation in kHz, e.g. `1.2`
FSK	FskRxBw	CFG_FSK_RX_BW	FSK bandwidth in kHz, one of `4.8, 5.8, 7.3, 9.7, 11.7, 14.6, 19.5, 23.4, 29.3, 39.0, 46.9, 58.6, 78.2, 93.8, 117.3, 156.2, 187.2, 234.3, 312.0, 373.0, 467.0`
APRS	AprsHost	"rotate.aprs2.net"	APRS-IS host
APRS	AprsPort	14580	APRS-IS port
APRS	AprsLogin	CFG_APRS_LOGIN	Your callsign for APRS-IS login
APRS	AprsPass	CFG_APRS_PASS	Your callsign key for APRS-IS login
APRS	AprsFilter	CFG_APRS_FILTER	APRS-IS incoming packet filter when running in iGate TX capable mode, see APRS-IS specification for supported formats, multiple filters are space separated
APRS	AprsRawBeacon	CFG_APRS_RAW_BKN	Raw APRS beacon
APRS	AprsRawBeaconPeriodMinutes	20	Raw APRS beacon transmission period
APRS	EnableSignalReport	CFG_SIGNAL_REPORT	`true` - signal report will be added to the comment sent to APRS-IS, `fasle` - won't be added
APRS	EnablePersistentAprsConnection	CFG_PERSISTENT_APRS	`true` - keep tcp/ip connection open, `false` - connect on new packet (very rare traffic)
APRS	EnableRfToIs	CFG_RF_TO_IS	Forward packets from radio to internet
APRS	EnableIsToRf	CFG_IS_TO_RF	Forward packets from internet to radio, `CFG_APRS_FILTER` filter rule applies
APRS	EnableRepeater	CFG_DIGIREPEAT	Digirepeat incoming packets
APRS	EnableBeacon	CFG_BEACON	Enable periodic beacon from `CFG_APRS_RAW_BKN`
APRS	EnableTextPackets	CFG_TEXT_PACKETS	`true` - operate on TNC2 text APRS packets for interoperability with other LoRa APRS projects (disables KISS usage) or to use Bluetooth terminal applications, `false` - operate on classic AX.25 frames (enables KISS usage)
APRS	EnableTextPackets3	CFG_TEXT_PACKETS_3	`true` - each packet will be prefixed with '<',0xff,0x01 for interoperability with lora-aprs, `false` - no prefix will be sent
USB	UsbSerialEnable	CFG_USB_SERIAL_ENABLE	`true` - enable USB transport (Bluetooth and TCP/IP modes are going to be disabled), `false` - disable
BT	BtName	CFG_BT_NAME	Set Bluetooth/BLE name, empty string disables Bluetooth/BLE usage
BT	BtEnableBle	CFG_BT_USE_BLE	`true` - use BLE instead of serial Bluetooth (for iOS apps), `false` - run in Bluetooth serial mode
WiFi	WifiEnableAp	CFG_WIFI_ENABLE_AP	`true` - run in WiFi AP mode (for KISS over TCP/IP), `false` - run in WiFi client/STA mode
WiFi	WifiSsid	CFG_WIFI_SSID	WiFi SSID name to connect to in STA mode, or AP SSID in AP mode
WiFi	WifiKey	CFG_WIFI_KEY	WiFi key of AP to which connection is performed, own key in AP mode
Freq	EnableAutoFreqCorrection	CFG_FREQ_CORR	`true` - enable automatic frequency correction on received packets, `false` - disable frequency correction
Freq	AutoFreqCorrectionDeltaHz	CFG_FREQ_CORR_DELTA	Perform frequency correction when difference is larger than this value in Hz
KISS	KissEnableExtensions	CFG_KISS_EXTENSIONS	`true` - enable KISS extensions, such as radio control and signal reports, `false` - disable frequency correction
KISS	KissEnableTcpIp	CFG_KISS_TCP_IP	`true` - run KISS TCP/IP server (has priority over Bluetooth, but Bluetooth is NOT going to be disabled), `false` - disable
PTT	PttEnable	CFG_PTT_ENABLE	`true` - enable external device PTT control, such as amplifier, `false` - disable
PTT	PttPin	CFG_PTT_PIN	Relay control pinout
PTT	PttTxDelayMs	CFG_PTT_TX_DELAY_MS	How much to wait before relay switching on and transmission startup
PTT	PttTxTailMs	CFG_PTT_TX_TAIL_MS	How much to wait after transmission completion before switching off the relay
KISS	TlmEnable	CFG_TLM_ENABLE	Enable modem telemetry
KISS	TlmBatMonPin	CFG_TLM_BAT_MON_PIN	Battery monitor ADC pin
KISS	TlmBatMonCal	CFG_TLM_BAT_MON_CAL	Battery voltage calibration correction value (float, volts)