Repetier-Firmware
0.91
|
Defines | |
#define | NUMTEMPS_1 28 |
#define | NUMTEMPS_2 21 |
#define | NUMTEMPS_3 28 |
#define | NUMTEMPS_4 20 |
#define | NUMTEMPS_8 34 |
#define | NUMTEMPS_9 67 |
#define | NUMTEMPS_10 20 |
#define | NUMTEMPS_11 31 |
#define | NUMTEMPS_12 31 |
#define | NUM_TEMPERATURE_LOOPS NUM_EXTRUDER |
Functions | |
void | writeMonitor () |
Writes monitored temperatures. | |
bool | reportTempsensorError () |
Report defect sensors. | |
Variables | |
uint8_t | manageMonitor = 255 |
Temp. we want to monitor with our host. 1+NUM_EXTRUDER is heated bed. | |
unsigned int | counterPeriodical = 0 |
volatile uint8_t | executePeriodical = 0 |
uint8_t | counter250ms = 25 |
const uint8 osAnalogInputChannels[] | PROGMEM = ANALOG_INPUT_CHANNELS |
uint8 | osAnalogInputCounter [ANALOG_INPUTS] |
uint | osAnalogInputBuildup [ANALOG_INPUTS] |
uint8 | osAnalogInputPos = 0 |
volatile uint | osAnalogInputValues [ANALOG_INPUTS] |
static uint8_t | extruderTempErrors = 0 |
uint8_t | autotuneIndex = 255 |
Extruder | extruder [NUM_EXTRUDER] |
TemperatureController * | tempController [NUM_TEMPERATURE_LOOPS] |
#define NUM_TEMPERATURE_LOOPS NUM_EXTRUDER |
#define NUMTEMPS_1 28 |
#define NUMTEMPS_10 20 |
#define NUMTEMPS_11 31 |
#define NUMTEMPS_12 31 |
#define NUMTEMPS_2 21 |
#define NUMTEMPS_3 28 |
#define NUMTEMPS_4 20 |
#define NUMTEMPS_8 34 |
#define NUMTEMPS_9 67 |
bool reportTempsensorError | ( | ) |
Report defect sensors.
void writeMonitor | ( | ) |
Writes monitored temperatures.
This function is called every 250ms to write the monitored temperature. If monitoring is disabled, the function is not called.
uint8_t autotuneIndex = 255 |
uint8_t counter250ms = 25 |
unsigned int counterPeriodical = 0 |
volatile uint8_t executePeriodical = 0 |
uint8_t extruderTempErrors = 0 [static] |
Makes updates to temperatures and heater state every call.
Is called every 100ms.
uint8_t manageMonitor = 255 |
Temp. we want to monitor with our host. 1+NUM_EXTRUDER is heated bed.
volatile uint osAnalogInputValues[ANALOG_INPUTS] |
const char ext0_deselect_cmd [] PROGMEM = ANALOG_INPUT_CHANNELS |
{ &extruder[0].tempControl }