Updated Default configuration (markdown)

Default-configuration.md

@@ -2,12 +2,6 @@ This page shows all the parameters set by default to radio modules and wireless
 
 __NOTE__: Only the parameters changed by RadioLib are listed here. In addition, the module/protocol may also have other parameters, configuration of which is not implemented in RadioLib. These are not listed on this page - consult the module datasheet or protocol specification.
 
-Legend:
-* Begin method - parameters configurable via `begin()` method.
-* Other - parameters which are not part of the `begin()` method, but can be configured using some other method from the library public API.
-* Inaccessible - parameters which can not be changed by the user.
-* Equivalent to - pseudo-code of calls to configuration methods that will result in the same configuration as the default.
-
 ## Overview
 
 ### FSK modules
@@ -28,6 +22,12 @@ The table below shows default values of parameters that are common accross all s
 
 ## Modules
 
+Legend:
+* Begin method - parameters configurable via `begin()` method.
+* Other - parameters which are not part of the `begin()` method, but can be configured using some other method from the library public API.
+* Inaccessible - parameters which can not be changed by the user.
+* Equivalent to - pseudo-code of calls to configuration methods that will result in the same configuration as the default.
+
 ### CC1101
 * Begin method:
   * Carrier frequency: 434.0 MHz
@@ -341,6 +341,12 @@ SX128x::setEncoding(0);
 
 ## Protocols
 
+Legend:
+* Begin method - parameters configurable via `begin()` method.
+* Other - parameters which are not part of the `begin()` method, but can be configured using some other method from the library public API.
+* Inaccessible - parameters which can not be changed by the user.
+* Equivalent to - pseudo-code of calls to configuration methods that will result in the same configuration as the default.
+
 ### AX.25
 * Begin method:
   * Source station callsign: no default value