mirror
/
Hamlib
kopia lustrzana https://github.com/Hamlib/Hamlib
1
0
Forkuj 0
Kod Zgłoszenia Projekty Wydania Wiki Aktywność
7 777 Commity
58 Gałęzie
31 Tagi
48 MiB
Wykres commitów

1447 Commity (ec2d5387a745e6eb94210faed12afb55cdeb8d88)

Autor SHA1 Wiadomość Data
Mike Black W9MDB f8da39243d Default Kenwood rigs to VFOA and split=off 
https://github.com/Hamlib/Hamlib/issues/745
 2021-08-04 09:38:15 -05:00
Chuck Ritola 407ba17c04 Parse and store RS-HFIQ firmware version. 2021-08-04 08:46:17 -04:00
Chuck Ritola dc11b02245 Implement board temperature reading for TEMP_METER 2021-08-04 05:55:34 -04:00
Chuck Ritola d228548b38 Add ability to read TX drive level 2021-08-04 04:23:56 -04:00
Mike Black W9MDB f29ee3e908 Harness for RS-HFIQ RIG_LEVEL_TEMP_METER 2021-08-03 00:04:13 -05:00
Mike Black W9MDB f8974c1e86 Implment FTDX101D/MP FTDX9000 METER_TEMP 
https://github.com/Hamlib/Hamlib/issues/755
 2021-08-02 23:55:24 -05:00
Mike Black W9MDB 4bfd71f91f Fix Icom split and implement reverse split 
These should work now from rigctl and via the API
S VFOB 1 VFOA
S Sub 1 Main
https://github.com/Hamlib/Hamlib/issues/754
 2021-08-02 23:37:31 -05:00
Mike Black W9MDB bb4dd88e0c Add RIG_METER_TEMP for FTDX9000 and FTDX101D/MP 
https://github.com/Hamlib/Hamlib/issues/755
 2021-08-02 13:15:51 -05:00
Mike Black W9MDB 0afa000de1 Fix xml tag in flrig.c 2021-07-22 07:04:53 -05:00
Mike Black W9MDB c3b4eafc2c Add new xml tag to flrig.c 2021-07-21 23:02:14 -05:00
Mike Black W9MDB a8200886bf Ensure kenwood rigs stay in split mode after FR0; command 
https://github.com/Hamlib/Hamlib/issues/746
 2021-07-19 23:49:48 -05:00
Mike Black W9MDB a092f1f630 Fix spelling error in icom.c 2021-07-19 22:58:19 -05:00
Mike Black W9MDB fe2c0e7723 Update kenwood.h version 2021-07-18 16:19:42 -05:00
Mike Black W9MDB 534246a807 Add TS-890S to rig id list in kenwood.c 2021-07-18 16:14:59 -05:00
Mike Black W9MDB e966508b3a For all kenwoods query split and don't change if not needed 
https://github.com/Hamlib/Hamlib/issues/744
 2021-07-17 17:02:42 -05:00
Mike Black W9MDB 756f8052fc Minimize 0x25cmdfails resets to only when satmode changes 
https://github.com/Hamlib/Hamlib/issues/741
 2021-07-15 10:19:33 -05:00
Mike Black W9MDB 0fecf4f587 Update version and status for rs_hfiq.c 2021-07-12 23:50:28 -05:00
Chuck Ritola d5231ec0da Use loop to ensure RS-HFIQ hears first command. Closes #730 2021-07-13 00:07:23 -04:00
Mike Black W9MDB 28c8b5a502 Increase timeout in netrigctl.c to 10000 to allow for worst case rig 
Most rigs will have their timeout set to the rig's timeout plus 500ms.
 2021-07-12 11:22:26 -05:00
Mike Black W9MDB 6bdb82bc54 Fix some vfo swapping issues for Icom rigs 
https://github.com/Hamlib/Hamlib/issues/734
 2021-07-08 13:14:42 -05:00
Mike Black W9MDB 65c77953f8 Add MainA/B SubA/B to icom.c 
https://github.com/Hamlib/Hamlib/issues/730
 2021-07-05 17:04:24 -05:00
Mike Black W9MDB 21ade6493a Add MainA/B and SubA/B to dummy rig for testing 
Add debug cache display for same when applicable
https://github.com/Hamlib/Hamlib/issues/730
 2021-07-05 11:24:07 -05:00
Mike Black W9MDB dd0187ede6 Fix Icom rig 0x25 command for set mode with data and no width change 
Fix Icom rigs not working with rigtctld and 0x25 command
https://github.com/Hamlib/Hamlib/issues/733
 2021-07-03 22:16:33 -05:00
Mike Black W9MDB 716fbb7643 Fix MAIN_B pointing to priv->vfo_mainb in dummy.c 2021-07-02 16:23:30 -05:00
Mike Black W9MDB 4e0107e988 Make 100Hz freq truncation work on 32-bit compilers in dummy.c 2021-07-01 07:22:02 -05:00
Mike Black W9MDB 76527afba5 Block 100Hz resolution logic from dummy.c 2021-06-30 13:01:45 -05:00
Mike Black W9MDB 466afd5d3f Fix WSJTX rig split behavior with rigctld -- was setting VFOA to VFOB freq 
https://github.com/Hamlib/Hamlib/issues/721
 2021-06-28 22:27:26 -05:00
Mike Black W9MDB 185d182a42 Add RIG_TARGETABLE_MODE to FT991 
Will allow proper split ops to set mode on VFOB
https://github.com/Hamlib/Hamlib/issues/731
 2021-06-28 08:44:11 -05:00
Mike Black W9MDB ca7ca873bc Add TARGETABLE_MODE to k3.c 
https://github.com/Hamlib/Hamlib/issues/728
 2021-06-24 17:48:30 -05:00
Mike Black W9MDB eaff946c26 In prm80 move misc.h include in prm80.c to prm80.h 
Should fix compilation problem on Open BSD 6.9
 2021-06-20 07:30:24 -05:00
Mike Black W9MDB c8439de131 Reverse K3 PKTLSB/PKTUSB sensing 
Was causing WSJTX to get a PKTLSB response after sending PKTUSB
These rigs now only set MD when MD needs changing which speeds up the polling cycle
https://github.com/Hamlib/Hamlib/issues/726
 2021-06-18 22:58:49 -05:00
Mike Black W9MDB b80ff9330c Add debug to k3.c to chase down mode setting problem 
https://github.com/Hamlib/Hamlib/issues/726
 2021-06-18 10:35:27 -05:00
Mike Black W9MDB 3b2715463d Change kenwood_set_mode to only change mode if necessary by reading it first 
https://github.com/Hamlib/Hamlib/issues/726
 2021-06-15 22:35:05 -05:00
Mike Black W9MDB 763e18fa42 Fix get_mode_with_data for IC7800 as it can set but not read mode with 0x26 command 
https://github.com/Hamlib/Hamlib/issues/725
 2021-06-14 07:52:29 -05:00
Mike Black W9MDB 42a9d4fbd6 Fix netrigctl vfo where non vfo mode VFOB was not working 
https://github.com/Hamlib/Hamlib/issues/721
 2021-06-13 22:53:18 -05:00
Mike Black W9MDB ed09f54483 Fix dummy rig current_vfo where non vfo mode VFOB was not working 
https://github.com/Hamlib/Hamlib/issues/721
 2021-06-13 22:51:55 -05:00
Mike Black W9MDB 9ff92fa5ec Add VFO_B as valid VFO for trxmanager set_split_freq_mode 
https://github.com/Hamlib/Hamlib/issues/724
 2021-06-13 16:06:40 -05:00
Mike Black W9MDB c7b10e0e8f Change K3 rigs to query MD and not set if not a change 
K3S was taking 400ms to do MD6; when already in MD6; so query is a lot faster
Will also avoid trying to set mode when PTT is on
https://github.com/Hamlib/Hamlib/issues/722
 2021-06-12 10:25:02 -05:00
Mike Black W9MDB 37b16fa283 Improved FLRig error message when requesting a mode that FLRig does not have 2021-06-07 09:32:57 -05:00
Mike Black W9MDB e427262a89 Promote thd74 to stable 2021-06-06 23:02:55 -05:00
Mike Black W9MDB fcb2529ed0 Have thd74.c call kenwood_open 
https://github.com/Hamlib/Hamlib/issues/718
 2021-06-06 07:57:33 -05:00
Mike Black W9MDB 976ba6df02 Add small delay in flex6xxx.c after ptt off -- seems to take a short while to really do it for the ANAN rigs 2021-06-05 22:23:57 -05:00
Mike Black W9MDB 540ca9cce3 Remove empty cmd from thd74.c and bump up to beta 
https://github.com/Hamlib/Hamlib/issues/718
 2021-06-05 16:54:53 -05:00
Michael Black 9d7e1651b2
Merge pull request #719 from mikaelnousiainen/add-spectrum-data-for-dummy-rig 
Add spectrum scope caps for dummy rig
 2021-06-05 14:21:40 -05:00
Mikael Nousiainen 840333266f Add spectrum scope caps for dummy rig. Fix duplicate definition for IC-785x. 2021-06-05 21:48:10 +03:00
Mike Black W9MDB f41bcaa71a Add IC-575 rig 2021-06-03 16:13:58 -05:00
Mike Black W9MDB 53476dd14d Remove some more debug 2021-06-01 07:19:00 -05:00
Mike Black W9MDB d9d562874d Fix compilation warning in icom.c 2021-05-31 08:36:45 -05:00
Mikael Nousiainen 3a67356bc1 Add some comments and improved debugging on SIGIO async data handling 2021-05-31 16:22:22 +03:00
Mikael Nousiainen 263c16984a Attempt to handle asynchronously pushed Icom CI-V frames (transceive and spectrum data) as these frame will get interleaved with command responses 2021-05-30 01:36:49 +03:00
Mike Black W9MDB 503897c41c Fix debug msg in netrigctl.c 2021-05-27 23:40:33 -05:00
Mike Black W9MDB 92ed52b5f7 Zero out response in flex6xxx.c -- was generating funky error messages 2021-05-27 10:19:49 -05:00
Mikael Nousiainen 12527581b0 Add SPECTRUM_ATT level (also supported by Kenwood rigs). Get VFO frequency for Icom spectrum edge ranges (if not cached). Fix preamp levels based on docs. Add supported AGC levels to recent Icom rigs. 2021-05-27 10:12:01 +03:00
Mikael Nousiainen 26ea916ca7 Implement Icom rig levels: SPECTRUM_EDGE_LOW and SPECTRUM_EDGE_HIGH 2021-05-27 01:09:01 +03:00
Mikael Nousiainen b4ba22d369 Implemented initial abstraction for spectrum scope data and support for Icom spectrum data output. The abstraction is based on common features of both Icom and Kenwood rigs. Added TRANSCEIVE func and enumeration of supported AGC levels. Work in progress. 2021-05-26 23:40:53 +03:00
Mikael Nousiainen ed180e2610 FT-450(D): Add S-meter, RF power meter and fix vox gain scale. The S-meter scale, while not perfect, is at least close to what the rig displays. 2021-05-20 09:13:15 +03:00
Mikael Nousiainen 252a3ead63 Add RIG_TARGETABLE_ROOFING to allow Yaesu roofing filter targeting by VFO only for FTDX5000 and FTDX101. Fix TS-480 VOXDELAY level definition. 2021-05-12 23:51:35 +03:00
Mike Black W9MDB 94410f7a71 Increase FLRig timeout to 5 seconds 2021-05-11 11:59:20 -05:00
Mike Black W9MDB 1bbe783e05 Change freq printout in ft1000mp.c 2021-05-08 12:47:59 -05:00
Mike Black W9MDB 493860dae8 Add ; to k3.c to please the eye 2021-05-07 12:30:14 -05:00
Mike Black W9MDB ce470548b2 Promote IC821H to stable 2021-05-07 11:43:53 -05:00
Mike Black W9MDB e84b8a3c99 Add special check for IC821H in icom_set_vfo 
Seems the IC821H reverses Main/Sub logic when in satmode
Remove IC821 from riglist.h and icom.c -- not used
https://github.com/Hamlib/Hamlib/issues/693
 2021-05-07 08:25:54 -05:00
Mike Black W9MDB 29013fd021 Add ic821h_set_split_vfo 
https://github.com/Hamlib/Hamlib/issues/693
 2021-05-06 23:59:00 -05:00
Mike Black W9MDB dd2f0f380e Fix bad variable in ts890.c 2021-05-06 12:21:48 -05:00
Michael Black 0ec349de49
Merge pull request #692 from mikaelnousiainen/fix-kenwood-vox-delay 
Fix Kenwood VOX delay unit
 2021-05-06 12:15:05 -05:00
Mike Black W9MDB 79a7a915fb Fix TS890 vox delay level 2021-05-06 12:14:17 -05:00
Mikael Nousiainen d0a12e5391 Hamlib VOX delay unit is 1/10th of a second 2021-05-06 18:24:02 +03:00
Mike Black W9MDB 7f60e1fcb0 Fix dummy rig to recognize Main/Sub VFOS -- this fixes "M CW 500" 
Fix rig.c set_mode to recognize curr_vfo correctly
https://github.com/Hamlib/Hamlib/issues/689
 2021-05-04 14:35:34 -05:00
Mike Black W9MDB 2dd87806cf Remove 3 second sleep from icom.c powerup 2021-04-30 15:59:43 -05:00
Mike Black W9MDB 81e3e2e5d2 astyle files 2021-04-29 17:23:37 -05:00
Mike Black W9MDB 604516ed8f Clean up mingw compiler warning for tones.h 
https://github.com/Hamlib/Hamlib/issues/659
 2021-04-29 17:16:51 -05:00
Mike Black W9MDB 386b08dc4f Add ctcss_list and dcs_list to rigctld so rigcctld caps reflects the connected rig 
https://github.com/Hamlib/Hamlib/issues/659
 2021-04-29 10:49:29 -05:00
Mike Black W9MDB 5473249e9a Add power2mW and mW2power to netrigctl.c 2021-04-28 17:39:08 -05:00
Mike Black W9MDB 0b203c7e8f Add transceive ability to dummy rig 2021-04-28 17:38:54 -05:00
Mike Black W9MDB bfa7599687 In kenwood.c skip verification for RU/RD commands. 
On the TS-2000 at least it caused Resource temporarily unavailable when sending ID right after RU/RD
https://github.com/Hamlib/Hamlib/issues/677
 2021-04-27 17:18:51 -05:00
Mike Black W9MDB 9a82ebf652 Make icom.c 0x25 cmd check only try once 
https://github.com/Hamlib/Hamlib/issues/685
 2021-04-27 10:00:10 -05:00
Mike Black W9MDB a6af56ff53 Fit kenwoods set_rit to move right right direction 
https://github.com/Hamlib/Hamlib/issues/677
 2021-04-27 07:34:14 -05:00
Mike Black W9MDB a281161fcf Improve kenwood set_rit to use the difference requested instead of restarting at zero 
https://github.com/Hamlib/Hamlib/issues/677
 2021-04-26 11:32:55 -05:00
Mike Black W9MDB 7ea0a49dcd Re-do get_rit for has_rit2 rigs 
If this works should be able to change get_rit in TS480 to the generic kenwood get_rit
https://github.com/Hamlib/Hamlib/issues/677
 2021-04-25 23:20:34 -05:00
Mikael Nousiainen 9ca111a5a5 Fix RIT for TS-480 2021-04-25 17:19:16 +03:00
Mikael Nousiainen 95b08de780 Fix RIT for TS-480 2021-04-25 17:14:59 +03:00
Mikael Nousiainen 6fd5371b12 Merge branch 'master' into ts480-fixes 2021-04-25 16:50:48 +03:00
Mikael Nousiainen 38e6cf1cd8 Fix TS-480 narrow filter widths. Add NR2 and CW IF filter support. 2021-04-25 16:50:16 +03:00
Mikael Nousiainen 08a7515e91 Add support for FW filter width command on TS-480 2021-04-24 19:13:12 +03:00
Mike Black W9MDB 60f861bfd5 More changes to bring rigctld dump_caps into line with rigctl dump_caps 
https://github.com/Hamlib/Hamlib/issues/659
 2021-04-24 09:16:40 -05:00
Mike Black W9MDB 9231c2f7e5 Some more change to bring rigctld dump_caps into line with rigctl dump_caps 
https://github.com/Hamlib/Hamlib/issues/659
 2021-04-24 08:47:01 -05:00
Mike Black W9MDB e0a3f8deac Fix rigctld caps ptt_type to reflect the connected rig 
https://github.com/Hamlib/Hamlib/issues/659
 2021-04-23 23:40:40 -05:00
Mike Black W9MDB 0a4e0dbdfb Fix RIT in kenwood.c -- default to 10Hz steps if rig step setting works 
https://github.com/Hamlib/Hamlib/issues/677
 2021-04-23 23:38:49 -05:00
Mike Black W9MDB 1d79b9e01c Fix icom \get_mode in non-vfo mode to stay on VFOB/Sub 
https://github.com/Hamlib/Hamlib/issues/676
 2021-04-23 17:43:54 -05:00
Mikael Nousiainen e4657a5d16 TS-480: Add Digital Noise Limiter. Start implementation for filter width command. Fix bugs. 2021-04-23 23:32:42 +03:00
Mikael Nousiainen de5c5a27a1 Add support for TS-480 slope filter settings and some useful custom funcs/levels. Fix TS-480 bugs. 2021-04-23 10:42:43 +03:00
Mike Black W9MDB b0e006ce6c astyle files 2021-04-21 23:48:29 -05:00
Mikael Nousiainen 1f57311fee Read values for all meters at once for TS-480 2021-04-21 13:42:53 +03:00
Mikael Nousiainen 45a1bf5b45 Fix Kenwood VOX gain and RIT set for TS-480 2021-04-20 12:04:28 +03:00
Mikael Nousiainen 6a0df54003 Add S-meter and SWR meter calibration tables for TS-480 2021-04-19 22:53:58 +03:00
Mikael Nousiainen 6e5791c221 Fix typo 2021-04-19 22:26:02 +03:00
Mikael Nousiainen c13fcd8616 Fix typo 2021-04-19 22:14:51 +03:00
Mikael Nousiainen 645941cf9a Add missing break 2021-04-19 22:11:02 +03:00
Mikael Nousiainen 6e1977277e Specify TS-480 extension menu value length 2021-04-19 22:06:41 +03:00
Mikael Nousiainen ad0569688b Add support for TS-480 extension menu and CW pitch. Set level gran for some levels. 2021-04-19 21:52:25 +03:00
Mikael Nousiainen bb1d0f83a0 Add RF power meter for TS-480 2021-04-19 20:37:20 +03:00
Mikael Nousiainen 212c41f0af Return S0 for TS-480 when PTT is ON 2021-04-19 20:35:53 +03:00
Mikael Nousiainen 9b9a2b5511 Add RF power meter for TS-480 2021-04-19 20:28:55 +03:00
Mikael Nousiainen 2b44f470fa Add RF power meter for TS-480 2021-04-19 20:28:15 +03:00
Mikael Nousiainen 055d4dce88 Fix TS-480 RIT/XIT 2021-04-19 19:57:52 +03:00
Mikael Nousiainen 4495b5b434 Add missing TS-480 caps 2021-04-19 19:43:29 +03:00
Mikael Nousiainen fc1160c0a5 TS-480 fixes 2021-04-19 19:21:02 +03:00
Mikael Nousiainen 4f66af6ee1 Merge upstream master and fix conflicts. Add new commands for TS-480 (WIP). 2021-04-19 18:34:17 +03:00
Mike Black W9MDB 870b9ca748 In icom.c add check for current vfo to avoid vfo swapping 
https://github.com/Hamlib/Hamlib/issues/665
https://github.com/Hamlib/Hamlib/issues/654
 2021-04-19 09:51:58 -05:00
Mike Black W9MDB cd82a2c008 In icom.c fix reading VFOB width when 0 and set to VFOA width 
https://github.com/Hamlib/Hamlib/issues/665
https://github.com/Hamlib/Hamlib/issues/654
 2021-04-18 22:46:50 -05:00
Mike Black W9MDB aefe8c44b7 In rig.c if rig does not set get_split_vfo then return cached values 
https://github.com/Hamlib/Hamlib/issues/654
https://github.com/Hamlib/Hamlib/issues/665
 2021-04-18 11:35:35 -05:00
Stephane Fillod 5d367f0920 prm80: fix RX frequencies on VHF 
The RX IF shift on VHF is the opposite than on UHF.

Tested-by: Claus <claus.moessner@web.de>
 2021-04-17 21:31:51 +02:00
Mike Black W9MDB 7d79b59bd7 When vfo twiddling is being done set_freq calls will be skipped 
https://github.com/Hamlib/Hamlib/issues/664
 2021-04-15 11:47:58 -05:00
Mike Black W9MDB 9cb7c7dcdf Fix IC-705 filters in ic7300.c 
https://github.com/Hamlib/Hamlib/issues/666
 2021-04-15 07:05:38 -05:00
Mike Black W9MDB 4501c1c97b Remove generated files 2021-04-14 15:41:01 -05:00
Mike Black W9MDB 9d310062eb More files for git clone configure to work 2021-04-14 09:19:27 -05:00
Mike Black W9MDB fe8677322e Remove MAIN and SUB VFOs from ic7100.c -- rig doesn't have them 
These have been in there for 8 years but just got exposed as a bug with new VFO handling
https://github.com/Hamlib/Hamlib/issues/660

Start changes to update rig->caps in netrigctl.c so "rigctl -m 2 u" matches "rigctl u"
https://github.com/Hamlib/Hamlib/issues/659
 2021-04-14 07:11:28 -05:00
Mike Black W9MDB 7366522883 Remove SATMODE from ic7100.c -- rig does not have satellite mode commands 
https://github.com/Hamlib/Hamlib/issues/660
 2021-04-13 15:31:57 -05:00
Mike Black W9MDB ec813ae57d Fix cppcheck warning in flrig.c 2021-04-12 09:31:10 -05:00
Mike Black W9MDB 3ef3a255ff Remove more verbosity from flrig.c 2021-04-11 17:34:53 -05:00
Mike Black W9MDB 9a0e9c370a Reduce flrig verbosity a bit 2021-04-11 16:56:04 -05:00
Mike Black W9MDB 73464a6c2e Fix IC910 behavior with gpredict -- also should fix some Main/Sub behavior elsewhere too 
https://github.com/Hamlib/Hamlib/issues/657
 2021-04-11 11:49:37 -05:00
Mike Black W9MDB 89c434cc26 Remove comment from flrig.c 2021-04-09 22:53:06 -05:00
Mike Black W9MDB 9644825308 Update flrig.c to use new set_verify cmds for freq & ptt 2021-04-09 22:47:56 -05:00
Mike Black W9MDB dae869f390 Fix punctuation error in flrig.c 2021-04-09 17:33:18 -05:00
Mike Black W9MDB eb63b1c9ea Enable set_ptt_fast in flrig.c -- Fixed in 1.3.54.17 2021-04-09 17:30:35 -05:00
Mike Black W9MDB c4e37ef277 Add timeout to dump_state so rigctld will use the rig's timeout value plus 200ms for additional network delays 2021-04-09 15:35:30 -05:00
Mike Black W9MDB 7ea4fd17aa Fix icom.c default vfo to usa VFOA/Main as appropriate 
https://github.com/Hamlib/Hamlib/issues/654
 2021-04-08 22:37:36 -05:00
Mike Black W9MDB 609c9ad8d5 Temporarily disable fast_set_ptt in flrig.c -- not working in FLRig 1.3.54.14 2021-04-08 16:16:35 -05:00
Mike Black W9MDB def3aee7a6 Add set_ptt_fast capability to flrig.c as default if available 2021-04-08 14:29:40 -05:00
Mike Black W9MDB 4c8dc6e245 Fix flrig vfo inaccessible in flrig_set_split_freq_mode 
https://github.com/Hamlib/Hamlib/issues/651
 2021-04-07 08:26:18 -05:00
Mike Black W9MDB bddf868414 Make Malachite do 2-freq set all the time -- seems to work well 
https://github.com/Hamlib/Hamlib/issues/645
 2021-04-06 17:38:59 -05:00
Mike Black W9MDB 993a3162fd Fix FTDX101 and FT9000 RFPOWER_METER_WATTS 
https://github.com/Hamlib/Hamlib/issues/641
 2021-04-06 17:13:14 -05:00
Mike Black W9MDB 72161dd316 https://github.com/Hamlib/Hamlib/issues/645 2021-04-06 16:14:36 -05:00
Mike Black W9MDB c02b079fb3 Update timeout values based on testing with Malchite SDR 
https://github.com/Hamlib/Hamlib/issues/645
 2021-04-06 10:45:18 -05:00
Mike Black W9MDB aa1972fb5d Show match when rig model is recognized in kenwood.c 2021-04-06 09:47:31 -05:00
Mike Black W9MDB 124a6faafd More Malachite updates 
https://github.com/Hamlib/Hamlib/issues/645
 2021-04-06 09:38:36 -05:00
Mike Black W9MDB 8d95db88d4 More Malachite updates 
https://github.com/Hamlib/Hamlib/issues/645
 2021-04-06 09:12:20 -05:00
Mike Black W9MDB eb0f596104 More Malachite updates 
https://github.com/Hamlib/Hamlib/issues/645
 2021-04-06 09:07:42 -05:00
Mike Black W9MDB 623287aa02 Updates for Malchite SDR 
https://github.com/Hamlib/Hamlib/issues/645
 2021-04-06 08:54:53 -05:00
Mike Black W9MDB 4c2f60b9b0 Fix no_id check in kenwood.c for Malchite SDR 
https://github.com/Hamlib/Hamlib/issues/645
 2021-04-06 08:46:49 -05:00
Mike Black W9MDB c25e8f9e5b Add TX/RX VFOs to dummy.c 2021-04-06 07:22:19 -05:00
Mike Black W9MDB 502c41d746 Zeroize id value in kenwood.c 2021-04-05 17:49:49 -05:00
Mike Black W9MDB 809f2744e6 Remove set/get_vfo from kenwood.c Malachite SDR 
https://github.com/Hamlib/Hamlib/issues/645
 2021-04-05 07:14:21 -05:00
Mike Black W9MDB 6cb6043a43 kenwood.c add default TS480 ID for Malchite SDR 
https://github.com/Hamlib/Hamlib/issues/645
 2021-04-04 23:42:39 -05:00
Mike Black W9MDB 1bd2cf37d7 In kenwood.c ake bad ID answer non-fatal 
https://github.com/Hamlib/Hamlib/issues/645
 2021-04-04 22:45:49 -05:00
Mike Black W9MDB 2b104ba37d Fix seg fault in Malachite open 
https://github.com/Hamlib/Hamlib/issues/645
 2021-04-04 16:13:45 -05:00
Mike Black W9MDB bbc8e00074 astyle files 2021-04-04 12:50:07 -05:00
Mike Black W9MDB d312945729 Added Malachite DSP -- emulates TS480 but needed to avoid sending ID; command 
https://github.com/Hamlib/Hamlib/issues/645
 2021-04-04 11:54:35 -05:00
Mike Black W9MDB 93f0cc78e9 Fix flrig.c ordering of statement to prevent warning message 2021-04-03 23:45:49 -05:00