mirror
/
Hamlib
kopia lustrzana https://github.com/Hamlib/Hamlib
1
0
Forkuj 0
Kod Zgłoszenia Projekty Wydania Wiki Aktywność
7 498 Commity
57 Gałęzie
31 Tagi
46 MiB
Wykres commitów

1339 Commity (e48e16beb088de25cb93e57be409cdd899d7dc0f)

Autor SHA1 Wiadomość Data
Mike Black W9MDB 0afa000de1 Fix xml tag in flrig.c 2021-07-22 07:04:53 -05:00
Mike Black W9MDB c3b4eafc2c Add new xml tag to flrig.c 2021-07-21 23:02:14 -05:00
Mike Black W9MDB a8200886bf Ensure kenwood rigs stay in split mode after FR0; command 
https://github.com/Hamlib/Hamlib/issues/746
 2021-07-19 23:49:48 -05:00
Mike Black W9MDB a092f1f630 Fix spelling error in icom.c 2021-07-19 22:58:19 -05:00
Mike Black W9MDB fe2c0e7723 Update kenwood.h version 2021-07-18 16:19:42 -05:00
Mike Black W9MDB 534246a807 Add TS-890S to rig id list in kenwood.c 2021-07-18 16:14:59 -05:00
Mike Black W9MDB e966508b3a For all kenwoods query split and don't change if not needed 
https://github.com/Hamlib/Hamlib/issues/744
 2021-07-17 17:02:42 -05:00
Mike Black W9MDB 756f8052fc Minimize 0x25cmdfails resets to only when satmode changes 
https://github.com/Hamlib/Hamlib/issues/741
 2021-07-15 10:19:33 -05:00
Mike Black W9MDB 0fecf4f587 Update version and status for rs_hfiq.c 2021-07-12 23:50:28 -05:00
Chuck Ritola d5231ec0da Use loop to ensure RS-HFIQ hears first command. Closes #730 2021-07-13 00:07:23 -04:00
Mike Black W9MDB 28c8b5a502 Increase timeout in netrigctl.c to 10000 to allow for worst case rig 
Most rigs will have their timeout set to the rig's timeout plus 500ms.
 2021-07-12 11:22:26 -05:00
Mike Black W9MDB 6bdb82bc54 Fix some vfo swapping issues for Icom rigs 
https://github.com/Hamlib/Hamlib/issues/734
 2021-07-08 13:14:42 -05:00
Mike Black W9MDB 65c77953f8 Add MainA/B SubA/B to icom.c 
https://github.com/Hamlib/Hamlib/issues/730
 2021-07-05 17:04:24 -05:00
Mike Black W9MDB 21ade6493a Add MainA/B and SubA/B to dummy rig for testing 
Add debug cache display for same when applicable
https://github.com/Hamlib/Hamlib/issues/730
 2021-07-05 11:24:07 -05:00
Mike Black W9MDB dd0187ede6 Fix Icom rig 0x25 command for set mode with data and no width change 
Fix Icom rigs not working with rigtctld and 0x25 command
https://github.com/Hamlib/Hamlib/issues/733
 2021-07-03 22:16:33 -05:00
Mike Black W9MDB 716fbb7643 Fix MAIN_B pointing to priv->vfo_mainb in dummy.c 2021-07-02 16:23:30 -05:00
Mike Black W9MDB 4e0107e988 Make 100Hz freq truncation work on 32-bit compilers in dummy.c 2021-07-01 07:22:02 -05:00
Mike Black W9MDB 76527afba5 Block 100Hz resolution logic from dummy.c 2021-06-30 13:01:45 -05:00
Mike Black W9MDB 466afd5d3f Fix WSJTX rig split behavior with rigctld -- was setting VFOA to VFOB freq 
https://github.com/Hamlib/Hamlib/issues/721
 2021-06-28 22:27:26 -05:00
Mike Black W9MDB 185d182a42 Add RIG_TARGETABLE_MODE to FT991 
Will allow proper split ops to set mode on VFOB
https://github.com/Hamlib/Hamlib/issues/731
 2021-06-28 08:44:11 -05:00
Mike Black W9MDB ca7ca873bc Add TARGETABLE_MODE to k3.c 
https://github.com/Hamlib/Hamlib/issues/728
 2021-06-24 17:48:30 -05:00
Mike Black W9MDB eaff946c26 In prm80 move misc.h include in prm80.c to prm80.h 
Should fix compilation problem on Open BSD 6.9
 2021-06-20 07:30:24 -05:00
Mike Black W9MDB c8439de131 Reverse K3 PKTLSB/PKTUSB sensing 
Was causing WSJTX to get a PKTLSB response after sending PKTUSB
These rigs now only set MD when MD needs changing which speeds up the polling cycle
https://github.com/Hamlib/Hamlib/issues/726
 2021-06-18 22:58:49 -05:00
Mike Black W9MDB b80ff9330c Add debug to k3.c to chase down mode setting problem 
https://github.com/Hamlib/Hamlib/issues/726
 2021-06-18 10:35:27 -05:00
Mike Black W9MDB 3b2715463d Change kenwood_set_mode to only change mode if necessary by reading it first 
https://github.com/Hamlib/Hamlib/issues/726
 2021-06-15 22:35:05 -05:00
Mike Black W9MDB 763e18fa42 Fix get_mode_with_data for IC7800 as it can set but not read mode with 0x26 command 
https://github.com/Hamlib/Hamlib/issues/725
 2021-06-14 07:52:29 -05:00
Mike Black W9MDB 42a9d4fbd6 Fix netrigctl vfo where non vfo mode VFOB was not working 
https://github.com/Hamlib/Hamlib/issues/721
 2021-06-13 22:53:18 -05:00
Mike Black W9MDB ed09f54483 Fix dummy rig current_vfo where non vfo mode VFOB was not working 
https://github.com/Hamlib/Hamlib/issues/721
 2021-06-13 22:51:55 -05:00
Mike Black W9MDB 9ff92fa5ec Add VFO_B as valid VFO for trxmanager set_split_freq_mode 
https://github.com/Hamlib/Hamlib/issues/724
 2021-06-13 16:06:40 -05:00
Mike Black W9MDB c7b10e0e8f Change K3 rigs to query MD and not set if not a change 
K3S was taking 400ms to do MD6; when already in MD6; so query is a lot faster
Will also avoid trying to set mode when PTT is on
https://github.com/Hamlib/Hamlib/issues/722
 2021-06-12 10:25:02 -05:00
Mike Black W9MDB 37b16fa283 Improved FLRig error message when requesting a mode that FLRig does not have 2021-06-07 09:32:57 -05:00
Mike Black W9MDB e427262a89 Promote thd74 to stable 2021-06-06 23:02:55 -05:00
Mike Black W9MDB fcb2529ed0 Have thd74.c call kenwood_open 
https://github.com/Hamlib/Hamlib/issues/718
 2021-06-06 07:57:33 -05:00
Mike Black W9MDB 976ba6df02 Add small delay in flex6xxx.c after ptt off -- seems to take a short while to really do it for the ANAN rigs 2021-06-05 22:23:57 -05:00
Mike Black W9MDB 540ca9cce3 Remove empty cmd from thd74.c and bump up to beta 
https://github.com/Hamlib/Hamlib/issues/718
 2021-06-05 16:54:53 -05:00
Michael Black 9d7e1651b2
Merge pull request #719 from mikaelnousiainen/add-spectrum-data-for-dummy-rig 
Add spectrum scope caps for dummy rig
 2021-06-05 14:21:40 -05:00
Mikael Nousiainen 840333266f Add spectrum scope caps for dummy rig. Fix duplicate definition for IC-785x. 2021-06-05 21:48:10 +03:00
Mike Black W9MDB f41bcaa71a Add IC-575 rig 2021-06-03 16:13:58 -05:00
Mike Black W9MDB 53476dd14d Remove some more debug 2021-06-01 07:19:00 -05:00
Mike Black W9MDB d9d562874d Fix compilation warning in icom.c 2021-05-31 08:36:45 -05:00
Mikael Nousiainen 3a67356bc1 Add some comments and improved debugging on SIGIO async data handling 2021-05-31 16:22:22 +03:00
Mikael Nousiainen 263c16984a Attempt to handle asynchronously pushed Icom CI-V frames (transceive and spectrum data) as these frame will get interleaved with command responses 2021-05-30 01:36:49 +03:00
Mike Black W9MDB 503897c41c Fix debug msg in netrigctl.c 2021-05-27 23:40:33 -05:00
Mike Black W9MDB 92ed52b5f7 Zero out response in flex6xxx.c -- was generating funky error messages 2021-05-27 10:19:49 -05:00
Mikael Nousiainen 12527581b0 Add SPECTRUM_ATT level (also supported by Kenwood rigs). Get VFO frequency for Icom spectrum edge ranges (if not cached). Fix preamp levels based on docs. Add supported AGC levels to recent Icom rigs. 2021-05-27 10:12:01 +03:00
Mikael Nousiainen 26ea916ca7 Implement Icom rig levels: SPECTRUM_EDGE_LOW and SPECTRUM_EDGE_HIGH 2021-05-27 01:09:01 +03:00
Mikael Nousiainen b4ba22d369 Implemented initial abstraction for spectrum scope data and support for Icom spectrum data output. The abstraction is based on common features of both Icom and Kenwood rigs. Added TRANSCEIVE func and enumeration of supported AGC levels. Work in progress. 2021-05-26 23:40:53 +03:00
Mikael Nousiainen ed180e2610 FT-450(D): Add S-meter, RF power meter and fix vox gain scale. The S-meter scale, while not perfect, is at least close to what the rig displays. 2021-05-20 09:13:15 +03:00
Mikael Nousiainen 252a3ead63 Add RIG_TARGETABLE_ROOFING to allow Yaesu roofing filter targeting by VFO only for FTDX5000 and FTDX101. Fix TS-480 VOXDELAY level definition. 2021-05-12 23:51:35 +03:00
Mike Black W9MDB 94410f7a71 Increase FLRig timeout to 5 seconds 2021-05-11 11:59:20 -05:00