Hamlib/tests/rotctl.1

188 wiersze
6.2 KiB
Groff
Czysty Zwykły widok Historia

.\" Hey, EMACS: -*- nroff -*-
.\" First parameter, NAME, should be all caps
.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
.\" other parameters are allowed: see man(7), man(1)
.TH ROTCTL "1" "January 4, 2009" "Hamlib" "Rotator Control Program"
.\" Please adjust this date whenever revising the manpage.
.\"
.\" Some roff macros, for reference:
.\" .nh disable hyphenation
.\" .hy enable hyphenation
.\" .ad l left justify
.\" .ad b justify to both left and right margins
.\" .nf disable filling
.\" .fi enable filling
.\" .br insert line break
.\" .sp <n> insert n+1 empty lines
.\" for manpage-specific macros, see man(7)
.SH NAME
rotctl \- control antenna rotators
.SH SYNOPSIS
.B rotctl
[\fIOPTION\fR]... [\fICOMMAND\fR]...
.SH DESCRIPTION
Control antenna rotators.
\fBrotctl\fP accepts \fIcommands\fP from the command line as well as in
interactive mode if none are provided on the command line.
.PP
.\" TeX users may be more comfortable with the \fB<whatever>\fP and
.\" \fI<whatever>\fP escape sequences to invode bold face and italics,
.\" respectively.
Keep in mind that \fBHamlib\fP is BETA level software.
While a lot of backend libraries lack complete rig support, the basic functions
are usually well supported. The API may change without publicized notice,
while an advancement of the minor version (e.g. 1.1.x to 1.2.x) indicates such
a change.
.PP
Please report bugs and provide feedback at the e-mail address given in the
REPORTING BUGS section. Patches and code enhancements are also welcome.
.SH OPTIONS
This program follows the usual GNU command line syntax, with long
options starting with two dashes (`-').
Here is s summary of the supported options:
.TP
.B \-m, --model=id
Select rotator model number. See model list (use 'rotctl -l').
.TP
.B \-r, --rot-file=device
Use \fIdevice\fP as the file name of the port the rotator is connected.
Often a serial port, but could be a USB to serial adapter. Typically
/dev/ttyS0, /dev/ttyS1, /dev/ttyUSB0, etc.
.br
Default is \fB/dev/rotator\fP (may be a symbolic link to the actual device).
.TP
.B \-s, --serial-speed=baud
Set serial speed to \fIbaud\fP rate. Uses maximum serial speed from rotator
backend capabilites as default.
.TP
.B \-t, --send-cmd-term=char
Change the termination \fIchar\fP for text protocol when using the \fIsend_cmd\fP command.
The default value is <CR>. Non ASCII printable characters can be specified as an
ASCII number, in hexadecimal format, prepended with 0x. You may pass an empty string
for no termination char. The string -1 tells rotctl to switch to binary protocol.
See the \fIsend_cmd\fP command for further explanation.
.TP
.B \-L, --show-conf
List all config parameters for the rotor defined with -m above.
.TP
.B \-C, --set-conf=parm=val[,parm=val]*
Set config parameter. e.g. stop_bits=2
.br
Use -L option for a list.
.TP
.B \-l, --list
List all model numbers defined in \fBHamlib\fP and exit.
.TP
.B \-v, --verbose
Set verbose mode, cumulative (see DIAGNOSTICS below).
.TP
.B \-h, --help
Show summary of these options and exit.
.TP
.B \-V, \-\-version
Show version of \fBrotctl\fP and exit.
.PP
\fBNOTE!\fP Some options may not be implemented by a given backend and will
return an error. This is most likely to occur with the \fI\-\-set-conf\fP
and \fI\-\-show-conf\fP options.
.SH COMMANDS
Commands can be entered either as a single char, or as a long command name.
Basically, the commands do not take a dash in front of them, as
the options do. They may be typed in when in interactive mode
or provided as argument(s) in command line interface mode.
.PP
Since most of the \fBHamlib\fP operations have a \fIset\fP and a \fIget\fP method,
an upper case letter will be used for \fIset\fP method whereas the
corresponding lower case letter refers to the \fIget\fP method. In
interactive mode, prepend a backslash to enter a long command name.
.br
Example: Use "\\get_info" to see the rotor's info.
.PP
Please note that the backend for the rotator to be controlled,
or the rotator itself may not support some commands. In that case,
the operation will fail with a \fBHamlib\fP error message.
.PP
A summary of commands is included below.
.TP
.B P, set_pos
Set position: azimuth and elevation.
.TP
.B p, get_pos
Get position: azimuth and elevation.
.TP
.B K, park
Park the antenna.
.TP
.B S, stop
Stop the rotator.
.TP
.B R, reset
Reset the rotator.
.TP
.B M, move
Move the rotator in a specific direction.
.TP
.B C, set_conf
Set a configuration parameter. It is safe to give "Token" a value of '0'
(zero). "Value" may be a string up to 20 characters.
.br
See -L output
.TP
.B _, get_info
Get misc information on the rotator.
.TP
.B w, send_cmd
Send raw command string to the rotator.
.br
<CR> (or send-cmd-term, see \fI-t\fP option) is appended automatically at the end
of the command for text protocols.
For binary protocols, enter values as \\0xAA\\0xBB
.SH EXAMPLES
Start \fBrotctl\fP for RotorEZ using COM1:
$ rotctl -m 401 -r /dev/ttyS0
Start \fBrotctl\fP using \fBrpc.rotd\fP:
$ rotctl -m 101
.SH DIAGNOSTICS
The \fB-v\fP, \fB--version\fP option allows different levels of diagnostics
to be output to \fBstderr\fP and correspond to -v for BUG, -vv for ERR,
-vvv for WARN, -vvvv for VERBOSE, or -vvvvv for TRACE.
A given verbose level is useful for providing needed debugging information to
the email address below. For example, TRACE output shows all of the values
sent to and received from the radio which is very useful for radio backend
library development and may be requested by the developers.
.SH EXIT STATUS
\fBrotctl\fP exits with:
.br
0 if all operations completed normally;
.br
1 if there was an invalid command line option or argument;
.br
2 if an error was returned by \fBHamlib\fP.
.SH BUGS
.PP
This suspiciously empty section...
.SH REPORTING BUGS
Report bugs to <hamlib-developer@lists.sourceforge.net>.
.br
We are already aware of the bug in the previous section :-)
.SH AUTHOR
Written by Stephane Fillod and the Hamlib Group
.br
<http://www.hamlib.org>.
.SH COPYRIGHT
Copyright \(co 2000-2009 Stephane Fillod and the Hamlib Group.
.br
This is free software; see the source for copying conditions.
There is NO warranty; not even for MERCHANTABILITY
or FITNESS FOR A PARTICULAR PURPOSE.
.SH SEE ALSO
.BR hamlib (3),
.BR rpc.rotd (8)