geeksville
66557241f3
Generate UF2 files for NRF52 release builds
2020-08-17 12:29:45 -07:00
geeksville
22946b5e51
@BigCorvus board now kinda boots
...
###RTT Client: -----------------------------------------------
###RTT Client: Connecting to J-Link RTT Server via localhost:19021 ...
###RTT Client: Connected.
SEGGER J-Link V6.70c - Real time terminal output
SEGGER J-Link ARM V9.6, SN=69663845
Process: JLinkGDBServerCLExe
Emitting reboot packet for serial shell
I2C device found at address 0x55
done
Meshtastic swver=unset, hwver=unset
Reset reason: 0x0
FIXME, call randomSeed
ERROR: No UBLOX GPS found
Hoping that NEMA might work
RadioConfig reset!
Initial packet id 1481765933, numPacketId 4294967295
No saved preferences found
NODENUM=0xB18C3A4E, dbsize=1
Starting meshradio init...
Set radio: name=Default, config=3, ch=6, power=17
SX1262 init result 0
sending owner !df5db18c3a4e/Unknown 3a4e/?4E
Update DB node 0xB18C3A4E, rx_time=0
old user !df5db18c3a4e/Unknown 3a4e/?4E
updating changed=0 user !df5db18c3a4e/Unknown 3a4e/?4E
Adding packet record (id=0x5851F430 Fr0x4E To0xFF, WantAck0, HopLim3 Payload:User)
enqueuing for send (id=0x5851F430 Fr0x4E To0xFF, WantAck0, HopLim3 encrypted)
txGood=0,rxGood=0,rxBad=0
Starting low level send (id=0x5851F430 Fr0x4E To0xFF, WantAck0, HopLim3 encrypted)
assert failed src/mesh/SX1262Interface.cpp: 102, virtual void SX1262Interface::setStandby(), test=err == ERR_NONE
2020-08-17 11:29:00 -07:00
Todd Allen
d191b12801
Adding port/help flags and error checking
2020-07-27 09:14:04 -04:00
geeksville
1aa7451866
0.9.1
2020-07-24 12:41:14 -07:00
geeksville
68490336b8
0.8.2
2020-07-18 16:28:14 -07:00
geeksville
39b0a89821
0.8.1
2020-07-18 13:19:35 -07:00
geeksville
cfad226b2b
use new ttgo-lora build names
2020-07-17 14:11:27 -07:00
geeksville
4550cce639
0.7.11
2020-07-12 14:42:21 -07:00
geeksville
7802d00031
add nrf52832 support
2020-07-10 10:03:08 -07:00
geeksville
40a15248e8
@slavino fixed tbeam in #243 , so add it back to the builds
2020-07-09 22:43:04 -07:00
geeksville
3151cfb064
0.7.10
2020-07-01 10:09:32 -07:00
geeksville
64cf1890f2
prebump to 0.7.9 build number, though not doing a release yet...
...
Because I want to pick a min build number for 'BLE OTA update allowed'
2020-06-22 17:10:18 -07:00
geeksville
b11b322581
0.7.8
2020-06-20 14:53:25 -07:00
geeksville
35aae48932
0.7.7
2020-06-18 11:18:53 -07:00
geeksville
656faf4ce9
ram investigation notes
2020-06-16 15:01:39 -07:00
geeksville
d8db4449be
0.7.6
2020-06-15 07:04:03 -07:00
geeksville
112a94e572
0.7.5
2020-06-13 16:48:34 -07:00
geeksville
846fc14b4a
0.7.4
2020-06-09 10:35:13 -07:00
geeksville
6a3853ef35
0.6.8
2020-06-06 08:33:20 -07:00
geeksville
4b5cfaf9ba
changes from bringing up PPR
2020-06-05 11:00:18 -07:00
geeksville
4e5a445d8b
0.6.7
2020-06-04 10:37:08 -07:00
geeksville
6a3033fa85
improve NRF52 debugging environment
2020-05-26 15:55:36 -07:00
Nicolas Derive
9f2646ba03
writeflash is actually write_flash in esptool.py
2020-05-22 12:53:54 +02:00
geeksville
3d919b21f6
0.6.4
2020-05-21 17:51:35 -07:00
geeksville
95e952b896
todo update
2020-05-16 16:09:06 -07:00
Mark Huson
4da5d79e88
add device-update to zip
2020-05-06 19:45:02 -07:00
Mark Huson
fc0c9bcfe3
add update script and README changes
2020-05-06 19:43:17 -07:00
geeksville
8bfe9fa8fc
0.6.3 - fix the problem of BLE message receiption being busted in 0.6.2
2020-05-05 18:40:17 -07:00
geeksville
95df7dd8dc
0.6.2
2020-05-04 20:04:44 -07:00
geeksville
4735b3ff5b
0.6.1 hotfix build for busted heltec style devices
2020-05-01 16:35:32 -07:00
geeksville
cfd6483ea5
oops - platform IO can have stale target specific builds without this
2020-05-01 16:34:16 -07:00
geeksville
02dfe7564f
0.6.0 release
2020-04-28 15:39:05 -07:00
geeksville
dec4870649
begin cleaning up mesh library layer so that it could be split someday
2020-04-27 07:54:19 -07:00
geeksville
309e7be00c
use segger console on nrf52
2020-04-23 13:52:46 -07:00
geeksville
a0b6d57591
Fix #69 - new BLE API is in and tested from android
2020-04-23 11:41:30 -07:00
geeksville
bd77d47215
change serial baud rate to 921600
2020-04-22 14:58:35 -07:00
geeksville
2419ebb04e
0.4.3 Fix #92 : omg - for the last couple of weeks the official builds were
...
all using US frequencies. This build fixes this (and makes the build
system cleaner in general).
If you are building your own builds in the IDE you'll need to start
setting an environment variable called COUNTRY to your two letter
country code (or leave unset to get US frequencies). See new comment
in platformio.ini.
2020-04-19 08:33:59 -07:00
geeksville
184eac6281
0.4.2
2020-04-17 18:51:46 -07:00
geeksville
62286fff52
0.4.1 release
2020-04-17 13:05:16 -07:00
geeksville
6afeb3e456
ok - new router seems to approximately work
2020-04-17 10:38:44 -07:00
geeksville
86716c4397
remove tbeam0.7 until someone who has the hardware can debug it
2020-04-16 09:05:53 -07:00
geeksville
ac7f3cd603
fix bin paths
2020-04-12 10:54:27 -07:00
geeksville
ef395a1596
0.2.3
2020-04-05 14:39:42 -07:00
geeksville
1b050a6c3d
stop distributing the (enormous) elf files in the zip file
2020-03-30 18:51:15 -07:00
geeksville
c1f8c8cca4
0.2.0
2020-03-28 20:10:37 -07:00
geeksville
ea250d9cd3
add initial guess at TBEAM 0.7 hardware support
2020-03-28 15:31:22 -07:00
geeksville
be468a2183
add reasonable guesses for TTGO LORA V1 and V2 boards - thanks @sensorsiot
...
for the pinouts
2020-03-28 14:45:33 -07:00
geeksville
a350b3795b
remove unused file
2020-03-28 13:16:54 -07:00
geeksville
cf2aa37635
clean up configuration.h and add support for ttgo-lora-v1 boards
2020-03-27 16:55:19 -07:00
geeksville
d831beab3d
moving build selection into platformio.ini rather than nasty #defines. thanks to @sensorslot
...
for the pointer to https://github.com/arendst/Tasmota - where I just borrowed heavily ;-)
2020-03-27 14:03:58 -07:00