d91ab5480f
begin support for TFT displays
2020-08-17 13:47:05 -07:00
781077e799
Turn on buck converter for @BigCorvus board, now radio works
2020-08-17 11:42:19 -07:00
22946b5e51
@BigCorvus board now kinda boots
...
###RTT Client: -----------------------------------------------
###RTT Client: Connecting to J-Link RTT Server via localhost:19021 ...
###RTT Client: Connected.
SEGGER J-Link V6.70c - Real time terminal output
SEGGER J-Link ARM V9.6, SN=69663845
Process: JLinkGDBServerCLExe
Emitting reboot packet for serial shell
I2C device found at address 0x55
done
Meshtastic swver=unset, hwver=unset
Reset reason: 0x0
FIXME, call randomSeed
ERROR: No UBLOX GPS found
Hoping that NEMA might work
RadioConfig reset!
Initial packet id 1481765933, numPacketId 4294967295
No saved preferences found
NODENUM=0xB18C3A4E, dbsize=1
Starting meshradio init...
Set radio: name=Default, config=3, ch=6, power=17
SX1262 init result 0
sending owner !df5db18c3a4e/Unknown 3a4e/?4E
Update DB node 0xB18C3A4E, rx_time=0
old user !df5db18c3a4e/Unknown 3a4e/?4E
updating changed=0 user !df5db18c3a4e/Unknown 3a4e/?4E
Adding packet record (id=0x5851F430 Fr0x4E To0xFF, WantAck0, HopLim3 Payload:User)
enqueuing for send (id=0x5851F430 Fr0x4E To0xFF, WantAck0, HopLim3 encrypted)
txGood=0,rxGood=0,rxBad=0
Starting low level send (id=0x5851F430 Fr0x4E To0xFF, WantAck0, HopLim3 encrypted)
assert failed src/mesh/SX1262Interface.cpp: 102, virtual void SX1262Interface::setStandby(), test=err == ERR_NONE
2020-08-17 11:29:00 -07:00
6b568ab2fb
add powerhold for @bigcorvus board
2020-08-16 14:50:04 -07:00
67bad9a689
Add SX1262 to @BigCorvus board
2020-08-16 14:20:05 -07:00
559a790286
Add @BigCorvus board support to build
2020-08-16 14:08:31 -07:00
08e5bd728b
lorarelay wip
2020-08-16 14:07:01 -07:00
0cfeeba2e2
add variant files by @BigCorvus
2020-08-16 13:25:24 -07:00
cb1053850d
Oops - I mismerged at somepoint, restore correct PPR variant.h defs
2020-08-03 11:05:24 -07:00
acbe8c159b
move rak815 variant to arduino repo
2020-07-10 12:38:11 -07:00
5b07d454b1
WIP RAK815 now builds correctly
2020-07-10 11:29:32 -07:00
b00a936f41
WIP RAK815 support
2020-07-10 11:02:29 -07:00
477c62082d
E22 SX1262 module now works!
...
Thanks mostly to an old github comment by @beegee-tokyo the fix was easy
(comment here https://github.com/jgromes/RadioLib/issues/12#issuecomment-520450429 )
We now set DIO3 to 2.4 volts to power the oscillator inside the E22
module (undocumented in the E22 docs)
2020-06-15 14:38:09 -07:00
4b5cfaf9ba
changes from bringing up PPR
2020-06-05 11:00:18 -07:00
c12fb69ca2
update protos
2020-05-10 14:17:05 -07:00
8b911aba7f
Cleanup build for NRF52 targets
2020-05-10 12:33:17 -07:00
814c126e67
ugly WIP on switching to RadioLib, still need to set freq etc...
2020-04-29 14:54:03 -07:00
a7d153abcb
CUSTOM GPIOs the SX1262MB2CAS shield when installed on the NRF52840-DK development board
2020-04-29 12:57:34 -07:00
b8b503cb0a
Add starting point of PPR variants definition
2020-04-24 12:40:22 -07:00
bb885a5110
add a variant based on the nrf52840-dk but with a RC clock.
...
Because I was dumb and accidentally ran some code that configured gpio 0
as an output and that was enough to smoke the xtal that was preinstalled
between P0.0 and P0.1.
2020-04-24 12:30:06 -07:00
geeksville