5621719eef
Add tbeam esp32s3 version support, replace AXP202X_Library with XPowersLIb
2022-09-06 15:58:33 +08:00
aadaf332cf
add stm32wl5e platform and wio-e5 variant ( #1631 )
...
Co-authored-by: Peter Lawrence <12226419+majbthrd@users.noreply.github.com>
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
2022-08-15 07:54:45 -05:00
213d9512f1
WIP: unify the RAK targets into one firmware ( #1350 )
...
* First steps to unify GPS Lib for RAK 1910 and RAK 12500
* Technicalities. Out with the old and build the new.
* Adapt Matrix
* We use 0.4.5 now
* While we're at it, yank the RAK815, it's EOL
* Satisfy CI - for now
* - yank UBX library, talk to GPS chip with NMEA only.
- more autodetect going on, this time for the Eink Display.
TODO: actually do something with the scan findings.
* i swear this works on windows! :-)
* these are only there to make CI happy
* don't update eink display if not detected.
* Replace Oberon Crypt Library with modified Adafruit Library. This elimintaes the need for the sdk-nfxlib submodule.
* - Revert auto screen selection (incomplete)
- Revert nrF crypto engine (needs more work)
- add separate defines for not-auto-selecting screen lib.
* Define 2 new variants for RAK - with or without epaper
* Update variants
Co-authored-by: Sacha Weatherstone <sachaw100@hotmail.com>
Co-authored-by: Ben Meadors <thebentern@tuta.io>
2022-04-25 15:13:41 +10:00
b7aa1397c7
Add DIY nRF82540 PCA10059 4.2inch NiceRF 868 ( #1354 )
...
* Update build-all.sh
* Update configuration.h
* Update EInkDisplay2.cpp
* Create platformio.ini
* Create variant.cpp
* Create variant.h
* Update platformio.ini
* Update check-all.sh
* Create nordic_pca10059.json
* Update variant.h
* Update EInkDisplay2.cpp
* Update configuration.h
* Update platformio.ini
* Update EInkDisplay2.cpp
* Update variant.h
* Update EInkDisplay2.cpp
* Update configuration.h
* Update EInkDisplay2.cpp
* Update variant.h
* Update nordic_pca10059.json
* Update platformio.ini
* Update platformio.ini
* Update platformio.ini
* Update platformio.ini
* Update variant.h
* Update variant.h
* Update variant.h
* Update variant.h
* Update variant.h
* Update variant.h
* Update variant.h
* Update configuration.h
* Update EInkDisplay2.cpp
* Update variant.h
* Update variant.h
* Update platformio.ini
* Update configuration.h
* Update configuration.h
* Update platformio.ini
* Update platformio.ini
* Update configuration.h
* Update platformio.ini
* Update configuration.h
* Update platformio.ini
* Update configuration.h
* Update configuration.h
* Update platformio.ini
* Update configuration.h
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
2022-04-05 11:46:07 -05:00
365120e9c2
Added RAK11200 board variant support ( #1177 )
...
* Added RAK11200 board variant support
2022-02-02 12:41:07 -06:00
91f4e17037
fix build for my hacked up nrf52 devboard (must use SD140)
2021-10-15 10:21:42 -07:00
c940d22a98
t-echo: enable nrfupload
2021-04-28 15:25:54 +08:00
2a9b2d3b29
official name for t-echo board
2021-04-27 10:21:54 +08:00
0a6d88a2d0
add not complete WIP for wizcore4600
2021-04-16 12:23:38 +08:00
328b24537f
rak4631: builds but WIP
2021-04-11 13:33:27 +08:00
c62863b1dc
Merge from origin
2021-03-14 19:42:57 -07:00
98d878cdfe
Port to lora_isp4520 board
2021-03-14 19:00:20 -07:00
51d0d0d6c5
begin new ttgo eink board
2021-01-16 09:57:55 +08:00
047df76373
move rev 0.1 of the ttgo eink board to eink0.1
2021-01-16 09:55:06 +08:00
bbc36f7b6f
switch to my new SD 7.2.0 S113 based bootloader
2020-10-31 12:22:20 +08:00
4ad562b9f4
The new 7.2.0 soft device works on nrf52833
2020-10-28 13:01:50 +08:00
5f2f3c94b9
PPR1 and allow boards to set lower or higher sx1262 power limits
2020-10-15 13:47:10 +08:00
965c2bda8d
corvus2 board builds
2020-10-13 13:59:06 +08:00
5fbeaee0b0
eink kinda builds
2020-09-24 14:36:43 -07:00
22946b5e51
@BigCorvus board now kinda boots
...
###RTT Client: -----------------------------------------------
###RTT Client: Connecting to J-Link RTT Server via localhost:19021 ...
###RTT Client: Connected.
SEGGER J-Link V6.70c - Real time terminal output
SEGGER J-Link ARM V9.6, SN=69663845
Process: JLinkGDBServerCLExe
Emitting reboot packet for serial shell
I2C device found at address 0x55
done
Meshtastic swver=unset, hwver=unset
Reset reason: 0x0
FIXME, call randomSeed
ERROR: No UBLOX GPS found
Hoping that NEMA might work
RadioConfig reset!
Initial packet id 1481765933, numPacketId 4294967295
No saved preferences found
NODENUM=0xB18C3A4E, dbsize=1
Starting meshradio init...
Set radio: name=Default, config=3, ch=6, power=17
SX1262 init result 0
sending owner !df5db18c3a4e/Unknown 3a4e/?4E
Update DB node 0xB18C3A4E, rx_time=0
old user !df5db18c3a4e/Unknown 3a4e/?4E
updating changed=0 user !df5db18c3a4e/Unknown 3a4e/?4E
Adding packet record (id=0x5851F430 Fr0x4E To0xFF, WantAck0, HopLim3 Payload:User)
enqueuing for send (id=0x5851F430 Fr0x4E To0xFF, WantAck0, HopLim3 encrypted)
txGood=0,rxGood=0,rxBad=0
Starting low level send (id=0x5851F430 Fr0x4E To0xFF, WantAck0, HopLim3 encrypted)
assert failed src/mesh/SX1262Interface.cpp: 102, virtual void SX1262Interface::setStandby(), test=err == ERR_NONE
2020-08-17 11:29:00 -07:00
b00a936f41
WIP RAK815 support
2020-07-10 11:02:29 -07:00
311d1a56b4
make a bare nrf52840dk build which will work for everyone
2020-07-09 20:05:39 -07:00
ed589727d6
Update NRF52 build to work again
2020-07-09 19:57:55 -07:00
8b911aba7f
Cleanup build for NRF52 targets
2020-05-10 12:33:17 -07:00
814c126e67
ugly WIP on switching to RadioLib, still need to set freq etc...
2020-04-29 14:54:03 -07:00
b8b503cb0a
Add starting point of PPR variants definition
2020-04-24 12:40:22 -07:00
bb885a5110
add a variant based on the nrf52840-dk but with a RC clock.
...
Because I was dumb and accidentally ran some code that configured gpio 0
as an output and that was enough to smoke the xtal that was preinstalled
between P0.0 and P0.1.
2020-04-24 12:30:06 -07:00
lewishe