kopia lustrzana https://github.com/projecthorus/wenet
Add docker start script
rodzic
edf7cc870b
commit
7e20a75013
|
@ -0,0 +1,48 @@
|
|||
# /usr/bin/env bash
|
||||
#
|
||||
# Helper script to start up the Wenet Docker image.
|
||||
#
|
||||
# This script is intended to be downloaded using wget or otherwise,
|
||||
# and modified prior to use.
|
||||
#
|
||||
|
||||
# Your station callsign, which will be shown on https://ssdv.habhub.org
|
||||
# when receiving packets.
|
||||
# Make sure there is no space between the = and your callsign.
|
||||
MYCALL=CHANGEME
|
||||
|
||||
# Receive Frequency (Hz)
|
||||
# The normal receive frequency used by Project Horus is 443.5 MHz
|
||||
RXFREQ=443500000
|
||||
|
||||
# Receiver Gain. Set this to 0 to use automatic gain control, otherwise if running a
|
||||
# preamplifier, you may want to experiment with lower gain settings to optimize
|
||||
# your receiver setup.
|
||||
# You can find what gain range is valid for your RTLSDR by running: rtl_test
|
||||
# A very rough figure that may work if you are running a preamp with ~20 dB gain is
|
||||
# 32.8 - your performance may vary!
|
||||
GAIN=0
|
||||
|
||||
# Bias Tee Enable (1) or Disable (0)
|
||||
# Enable this is you are intending on powering a preamplifer via coax from your RTLSDR
|
||||
BIAS=0
|
||||
|
||||
|
||||
# Stop and remove any existing wenet instances
|
||||
echo "Stopping/Removing any existing Wenet instances..."
|
||||
docker stop wenet || true && docker rm wenet || true
|
||||
|
||||
# Start the container!
|
||||
echo "Starting new Wenet instance..."
|
||||
docker run -d \
|
||||
--name wenet \
|
||||
-e MYCALL=$MYCALL \
|
||||
-e RXFREQ=$RXFREQ \
|
||||
-e GAIN=$GAIN \
|
||||
-e BIAS=$BIAS \
|
||||
-v ~/wenet/rx_images/:/opt/wenet/rx_images/ \
|
||||
--device /dev/bus/usb \
|
||||
-p 5003:5003 \
|
||||
ghcr.io/projecthorus/wenet:latest
|
||||
|
||||
echo "Navigate to http://localhost:5003/ in your web browser to see the Wenet interface!"
|
Ładowanie…
Reference in New Issue