kopia lustrzana https://github.com/stlink-org/stlink
1.5 KiB
1.5 KiB
% st-flash(1) Open Source STMicroelectronics Stlink Tools | stlink % % Feb 2018
NAME
st-flash - Flash binary files to STM32 device
SYNOPSIS
st-flash [OPTIONS] {read|write|erase} [FILE] <ADDR> <SIZE>
DESCRIPTION
Flash binary files to arbitrary sections of memory, or read arbitrary addresses of memory out to a binary file.
You can use this instead of st-util(1) if you prefer, but remember to use the .bin image, rather than the .elf file.
Use hexadecimal format for the ADDR and SIZE.
COMMANDS
- write FILE ADDR
- Write firmware FILE to device starting from ADDR
- read FILE ADDR SIZE
- Read firmware from device starting from ADDR up to SIZE bytes to FILE
- erase
- Perform a mass erasing of the device firmware
- reset
- Reset the target
OPTIONS
- --version
- Print version information
- --debug
- TODO
- --reset
- TODO
- --opt
- Enable ignore ending empty bytes optimization
- --serial iSerial
- TODO
- --flash=fsize
- Where fsize is the size in decimal, octal, or hex followed by an optional multiplier 'k' for KB, or 'm' for MB. Use a leading "0x" to specify hexadecimal, or a leading zero for octal.
EXAMPLES
Flash firmware.bin
to device
$ st-flash write firmware.bin 0x8000000
Read firmware from device (4096 bytes)
$ st-flash read firmware.bin 0x8000000 0x1000
Erase firmware from device
$ st-flash erase
SEE ALSO
st-util(1), st-info(1)
COPYRIGHT
This work is copyrighted. Stlink contributors. See LICENSE file in the stlink source distribution.