![](../sane.png)
sane-matsushita.5
sane-matsushita(5) SANE Scanner Access Now Easy sane-matsushita(5)
NAME
sane-matsushita - SANE backend for Panasonic KV-SS high speed scanners
DESCRIPTION
The sane-matsushita library implements a SANE (Scanner Access Now Easy)
backend that provides access to some Panasonic KV-SS high speed scan-
ners. This backend is stable.
At present, the following scanners are known to work with this backend:
Product id
--------------
KV-SS 25
KV-SS 25D
Other Panasonic high speed scanners may or may not work with that back-
end.
Valid command line options and their syntax can be listed by using
scanimage --help -d matsushita
Scan Mode
--mode selects the basic mode of operation of the scanner.
--resolution
selects the resolution for a scan. Each model supports all or a
subset of these resolutions: 100, 150, 200, 240, 300, 360, 400.
--duplex
indicates whether to scan both side of the sheet.
--feeder-mode
selects the number of pages to scan (one or until the tray is
empty).
Geometry
--paper-size A4|...|Legal|Letter [A4]
options selects the area to scan. It adjust the -l -t -x -y
options accordingly. It does not need to be the real size of the
paper.
-l -t -x -y
control the scan area: -l sets the top left x coordinate, -t the
top left y coordinate, -x selects the width and -y the height of
the scan aea. All parameters are specified in milimeters. It is
possible to use the option --paper-size instead.
Enhancement
--brightness
controls the brightness of the acquired image. The value varies
from 1 to 255, or less, depending on the scanner model.
--contrast
controls the contrast of the acquired image. Some models do not
support that option.
--automatic-threshold
automatically sets brightness, contrast, white level, gamma,
noise reduction and image emphasis. These options are not avail-
able when automatic-threshold is in use.
--halftone-pattern
option sets the tonal gradation for the halftone mode. Pattern
downloading is not implemented by the backend.
--autoseparation
provides automatic separation of text and images.
--white-level
option indicate the source of the white base.
--noise-reduction
reduces the isolated dot noise. This option is not supported by
all scanners.
--image-emphasis
option sets the image emphasis. Some selection are not available
on all scanners.
--gamma
options set the gamma curve. It is only valid for Gray modes,
and is not available on all scanners. Gamma downloading is not
implemented by the backend.
CONFIGURATION FILE
The configuration file /usr/local/etc/sane.d/matsushita.conf supports
the device name to use (eg /dev/scanner) and the scsi option to autode-
tect the scanners supported.
FILES
/usr/local/lib/sane/libsane-matsushita.a
The static library implementing this backend.
/usr/local/lib/sane/libsane-matsushita.so
The shared library implementing this backend (present on systems
that support dynamic loading).
ENVIRONMENT
SANE_DEBUG_MATSUSHITA
If the library was compiled with debug support enabled, this
environment variable controls the debug level for this backend.
E.g., a value of 128 requests all debug output to be printed.
Smaller levels reduce verbosity.
LIMITATIONS
Memory in the KV-SS 25
The KV-SS 25 has not enough internal memory to scan a whole A4
page in duplex mode at high densities. The frontend will return
a memory error in that case. Apparently, the KV-SS 25D has not
that problem.
Pattern and gamma downloading
The scanner, with the proper firmware, can download a halftone
pattern and a gamma table. This is not implemented.
Sub-areas
The scanner can support up to 3 sub-areas on each side to define
some more precise enhancment options. This is not implemented.
Duplex mode
The backend does not support the setting of different options
for each side. The scan will occur with the same options
(halftone pattern, brightness, image emphasis) for both sides.
SCANNING EXAMPLE
To date, the only frontend capable of using this scanner at full speed
is scanadf.
A scanadf command line would be:
scanadf -d matsushita --output-file scan%04d.pbm --start-count 0
--duplex --resolution 300 --feeder-mode="All pages" --paper-size="A4"
BUGS
None known.
SEE ALSO
sane-scsi(5), scanimage(1), xscanimage(1), xsane(1), sane(7)
AUTHOR
The package is actively maintained by Frank Zago.
http://fz.eryx.net/sane/#matsushita
sane-backends 1.0.12-cvs April 21s, 2002 sane-matsushita(5)
Man(1) output converted with
man2html