sane-coolscan.5

sane-coolscan(5)         SANE Scanner Access Now Easy         sane-coolscan(5)

NAME

       sane-coolscan - SANE backend for Nikon film-scanners

ABOUT THIS FILE

       This file is a short descripton of the coolscan-backend for sane!

DESCRIPTION

       The  sane-coolscan  library implements a SANE backend that provides the
       interface to the following Nikon Coolscan Film  scanners:  Nikon  LS20,
       LS30, LS1000, LS2000.

       Even  though  the  backend has worked for a number of people, there are
       still  some  problems,  especially  in  combination  with   some   SCSI
       card/drivers (AHA-1505/aha152x.o) and the autofocus command. You should
       consider this backend 'alpha' and be carefull when using it  the  first
       time.

CONFIGURATION

       The    configuration    file    for    this    backend    resides    in
       /usr/local/etc/sane.d/coolscan.conf.

       Its contents is a  list  of  device  names  that  correspond  to  Nikon
       Coolscan  scanners. Empty lines and lines starting with a hash mark (#)
       are ignored. A sample configuration file is shown below:

        #scsi Vendor Model Type
        scsi Nikon * Scanner
        /dev/scanner

       The special device name must be a generic SCSI device or a  symlink  to
       such  a  device.   To find out to which device your scanner is assigned
       and how you have to set the permissions of that device, have a look  at
       sane-scsi.

SCSI ADAPTER TIPS

       Some  SCSI-adapters  and  low-level  SCSI drivers do not work correctly
       with this backend and the Coolscan scanners. These  systems  hang  when
       the  autofocus  command is send to the Scanner.  To see a list of which
       card/driver  combinations  work  or  dont  work   have   a   look   at:
       http://andreas.rick.free.fr/sane/autofocus.html.

FILES

       The backend configuration file:
        /usr/local/etc/sane.d/coolscan.conf.

       The static library implementing this backend:
        /usr/local/lib/sane/libsane-coolscan.a

       The shared library implementing this backend:
        /usr/local/lib/sane/libsane-coolscan.so
        (present on systems that support dynamic loading)

ENVIRONMENT

       SANE_DEBUG_COOLSCAN
        If   the  library  was  compiled  with  debug  support  enabled,  this
       environment variable controls the debug level for this backend. E.g., a
       value  of  128  requests all debug output to be printed. Smaller levels
       reduce verbosity: SANE_DEBUG_COOLSCAN values

       Examples:
        on bash:
        export SANE_DEBUG_COOLSCAN=8
        on csh
        setenv SANE_DEBUG_COOLSCAN 8

BUGS

        The autofocus command does not work with some SCSI card/driver  combi-
       nations
        The gamma table is not implemented for the LS1000 yet.
        The dust-removal is not working yet

SEE ALSO

        http://andreas.rick.free.fr/sane/ The homepage of this backend
        http://www.sema.be/coolscan/   The  original  version  of the coolscan
       backend by Didier
        sane(7), sane-scsi(5)

THANKS TO

        Didier Carlier - For writing the original Coolscan backend (without it
       I would not have started this)
        Oliver.Rauch - For adapting xsane so quickly to the infrared stuff.
        All the other people working on SANE.

AUTHOR

       Andreas Rick

EMAIL-CONTACT

       andreas.rick@free.fr

sane-backends 1.0.12-cvs          4 July 2000                 sane-coolscan(5)