sane-gt68xx.5
sane-gt68xx(5) SANE Scanner Access Now Easy sane-gt68xx(5)
NAME
sane-gt68xx - SANE backend for GT-68XX based USB flatbed scanners
DESCRIPTION
The sane-gt68xx library implements a SANE (Scanner Access Now Easy)
backend that provides access to USB flatbed scanners based on the
Grandtech GT-6801 and GT-6816 chips. At present, the following scan-
ners are known to work with this backend:
Artec Ultima 2000 (only product 0x4002)
Artec Ultima 2000 e+
Boeder SmartScan Slim Edition
Fujitsu 1200CUS
Genius Colorpage Vivid3x
Genius Colorpage Vivid3 V2
Genius Colorpage Vivid3xe
Genius Colorpage Vivid4
Genius Colorpage Vivid4x
Genius Colorpage Vivid4xe
Genius Colorpage Vivid 1200 xe
Googlegear 2000
Lexmark X70
Lexmark X73
Medion/Lifetec/Tevion MD 4395
Medion/Lifetec/Tevion/Cytron MD/LT 9385
Medion/Lifetec/Tevion LT 9452
Medion/Lifetec/Tevion MD 9458
Mustek BearPaw 1200 CS
Mustek BearPaw 1200 CU (Plus)
Mustek BearPaw 1200 TA
Mustek BearPaw 2400 CS (Plus)
Mustek BearPaw 2400 CU (Plus)
Mustek BearPaw 2400 TA (Plus)
Mustek BearPaw 2448 CS Plus
Mustek BearPaw 2448 TA Plus
Mustek Plug-n-Scan 2400 M
Plug-n-Scan 2400 MT
Mustek ScanExpress A3 USB
Mustek ScanExpress 1200 UB Plus
Mustek ScanExpress 1248 UB
Mustek ScanExpress 2400 USB
Mustek ScanMagic 1200 UB Plus
Packard Bell Diamond 1200 (Plus)
Packard Bell Diamond 2450
Plustek OpticPro 1248U
Plustek OpticPro U16B (+)
Plustek OpticPro UT16B (+)
Plustek OpticSlim 1200
Plustek OpticSlim 2400
RevScan 19200i
Trust Compact Scan USB 19200
Trust Flat Scan USB 19200
Trust 240TH Easy Webscan Gold
More details can be found on the gt68xx backend homepage
http://www.meier-geinitz.de/sane/gt68xx/.
The Artec E+ 48U and its clones are supported by the artec_eplus48u
backend, see sane-artec_eplus48u(5) for details.
This is BETA software. Especially if you test new or untested scanners,
keep your hand at the scanner's plug and unplug it, if the head bumps
at the end of the scan area.
If you own a scanner other than the ones listed above that works with
this backend, please let me know this by sending the scanner's exact
model name and the USB vendor and device ids (e.g. from
/proc/bus/usb/devices, sane-find-scanner or syslog) to me. Even if the
scanner's name is only slightly different from the models mentioned
above, please let me know.
If you own a scanner that isn't detected by the gt68xx backend but has
a GT-6801 or GT-6816 chipset, you can try to add it to the backend.
Have a look at the following web page: http://www.meier-
geinitz.de/sane/gt68xx-backend/adding.html
KERNEL ISSUES
If libusb-0.1.6 or later is installed, this section can be skipped. The
scanner should be found by sane-find-scanner without further actions.
For setting permissions and general USB information looks at
sane-usb(5).
The scanners based on the GT-6816 (Mustek BearPaw TA and BearPaw Plus
models, the Packard Bell and the Lexmark scanner) need a Linux kernel
2.4.12 or newer. Recent 2.2 kernels may also work, but I haven't
tested them. Older kernels or other operating systems won't work. Use
libusb instead.
The scanners based on the GT-6801 (all other scanners) need Linux ker-
nel 2.4.21 or newer. Older kernels will not work.
FIRMWARE FILE
You need a firmware file for your scanner. That's a small file contain-
ing software that will be uploaded to the scanner's memory. It's usu-
ally named *.usb, e.g. PS1fw.usb. It comes on the installation CD
that was provided by the manufacturer, but it may be packaged together
with the installation program in an .exe file. For Mustek scanners, the
file can be dowloaded from the gt68xx backend homepage. For other scan-
ners, check the CD for .usb files. If everything else fails, you must
install the Windows driver and get the firmware from there (usually in
the windows/system or system32 directories). Put that firmware file
into /usr/local/share/sane/gt68xx/. Make sure that it's readable by
everyone.
CONFIGURATION
The contents of the gt68xx.conf file is a list of usb lines containing
vendor and product ids that correspond to USB scanners. The file can
also contain option lines. Empty lines and lines starting with a hash
mark (#) are ignored. The scanners are autodetected by usb vendor_id
product_id statements which are already included into gt68xx.conf.
"vendor_id" and "product_id" are hexadecimal numbers that identfy the
scanner.
The override, firmware, vendor, model, and afe options must be placed
after the usb line they refer to.
Option override is used to override the default model parameters.
That's necessary for some scanners that use the same vendor/product ids
but are different. For these scanners there are already commented out
override lines in the configuration file. override mustek-scanex-
press-1200-ub-plus is necessary for the Mustek Scanexpress 1200 UB
Plus, the Medion/Lifetec/Tevion LT 9452, and the Trust Compact Scan USB
19200. override artec-ultima-2000 is used for the Artec Ultima 2000,
the Boeder SmartScan Slim Edition, the Medion/ Lifetec/ Tevion/ Cytron
MD/LT 9385, the Medion/ Lifetec/ Tevion MD 9458, and the Trust Flat
Scan USB 19200. override mustek-bearpaw-2400-cu is necessary for the
Mustek BearPaw 2400 CU and the Fujitsu 1200CUS. The override option
must be the first one after the usb line.
Option firmware selects the name and path of the firmware file. It's
only necessary if the default (or override) doesn't work. The default
firmware directory is /usr/local/share/sane/gt68xx/. You may need to
create this directory. If you want to place the firmware files at a
different path, use a firmware line.
The vendor and model options are not absolutely necessary but for con-
venience. Quite a lot of scanners from different manufacturers share
the same vendor/product ids so you can set the "correct" name here.
The afe option allows to set custom offset and gain values for the Ana-
log FrontEnd of the scanner. This option can be either used to select
the AFE values if automatic coarse calibration is disabled, or to make
automatic coarse calibration faster. For the latter usage, enable debug
level 3 (see below), scan an image and look for debug line string with
"afe". Copy this line to gt68xx.conf. The option has six parameters:
red offset, red gain, green offset, green gain, blue offset, and blue
gain.
A sample configuration file is shown below:
usb 0x05d8 0x4002
override "mustek-scanexpress-1200-ub-plus"
firmware "/opt/gt68xx/SBfw.usb"
vendor "Trust"
model "Compact Scan USB 19200"
afe 0x20 0x02 0x22 0x03 0x1f 0x04
FILES
/usr/local/etc/sane.d/gt68xx.conf
The backend configuration file (see also description of
SANE_CONFIG_DIR below).
/usr/local/lib/sane/libsane-gt68xx.a
The static library implementing this backend.
/usr/local/lib/sane/libsane-gt68xx.so
The shared library implementing this backend (present on systems
that support dynamic loading).
ENVIRONMENT
SANE_CONFIG_DIR
This environment variable specifies the list of directories that
may contain the configuration file. Under UNIX, the directories
are separated by a colon (`:'), under OS/2, they are separated
by a semi-colon (`;'). If this variable is not set, the config-
uration file is searched in two default directories: first, the
current working directory (".") and then in
/usr/local/etc/sane.d. If the value of the environment variable
ends with the directory separator character, then the default
directories are searched after the explicitly specified directo-
ries. For example, setting SANE_CONFIG_DIR to "/tmp/config:"
would result in directories "tmp/config", ".", and
"/usr/local/etc/sane.d" being searched (in this order).
SANE_DEBUG_GT68XX
If the library was compiled with debug support enabled, this
environment variable controls the debug level for this backend.
Higher debug levels increase the verbosity of the output. If the
debug level is set to 1 or higher, some debug options become
available that are normally hidden. Handle them with care.
Example: export SANE_DEBUG_GT68XX=4
SEE ALSO
sane(7), sane-usb(5), sane-artec_eplus48u(5) sane-plustek(5),
sane-ma1509(5), sane-mustek_usb(5), sane-mustek(5), sane-mustek_pp(5)
/usr/local/doc/sane-1.0.15/gt68xx/gt68xx.CHANGES
http://www.meier-geinitz.de/sane/gt68xx
AUTHOR
Henning Meier-Geinitz <henning@meier-geinitz.de>
The original gt68xx driver was written by Sergey Vlasov, Andreas
Nowack, and David Stevenson. Thanks for sending patches and answering
questions to them and all the other contributors.
BUGS
Currently scanning seems to only work reliably under Linux. With
FreeBSD, NetBSD and OpenBSD scanning works only once. Then the scanner
isn't detected anymore and has to be replugged.
The first few lines of the image are garbage for the 2400 TA Plus.
Interpolation should be used instead of just copying data, when the X-
and Y-resolution differ.
Support for buttons is missing.
More detailed bug information is available at the gt68xx backend home-
page http://www.meier-geinitz.de/sane/gt68xx. Please contact me if you
find a bug or missing feature: <henning@meier-geinitz.de>. Please send
a debug log if your scanner isn't detected correctly (see
SANE_DEBUG_GT68XX above).
sane-backends 1.0.15 2 Oct 2004 sane-gt68xx(5)
Man(1) output converted with
man2html