mirror
/
sane-project-website
kopia lustrzana https://gitlab.com/sane-project/website
1
0
Forkuj 0
Kod Zgłoszenia Projekty Wydania Wiki Aktywność

Updating several scanners that may be supported by the genesys backend.

merge-requests/1/head
Henning Geinitz 2004-03-08 19:27:02 +00:00
rodzic 8330f71f9f
commit 7d9eea0221
9 zmienionych plików z 250 dodań i 5 usunięć
Pokaż statystyki Ściągnij plik aktualizacji Ściągnij plik porównania Expand all files Collapse all files

5
unsupported/canon-lide-50.html
Wyświetl plik

@ -67,6 +67,11 @@ other chips:
</p>
<h2>Comments</h2>
<p>
This scanner may be supported by the <a
href="http://www.meier-geinitz.de/sane/genesys-backend/">Genesys
backend</a>, when it's finished.
</p>
<h2>Output of /proc/bus/usb/devices or sane-find-scanner -v -v</h2>
<pre>
T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 4 Spd=12 MxCh= 0

7
unsupported/canon-lide-80.html
Wyświetl plik

@ -31,9 +31,14 @@
</p>
<h2>Chipset</h2>
<p>
Probably Genesys Logic GL841.
Genesys Logic GL841.
</p>
<h2>Comments</h2>
<p>
This scanner may be supported by the <a
href="http://www.meier-geinitz.de/sane/genesys-backend/">Genesys
backend</a>, when it's finished.
</p>
<h2>Output of /proc/bus/usb/devices or sane-find-scanner -v -v</h2>
<pre>
T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 3 Spd=12 MxCh= 0

8
unsupported/hp-scanjet-2300c.html
Wyświetl plik

@ -31,11 +31,17 @@
</p>
<h2>Chipset</h2>
<p>
GL646_HP<br>
On the chip these are the no's: fzc1n20gj and m11b41a
</p>
<h2>Comments</h2>
<p>
Someone <a
This scanner may be supported by the <a
href="http://www.meier-geinitz.de/sane/genesys-backend/">Genesys
backend</a>, when it's finished.
</p>
<p>
Someone else<a
href="http://xoomer.virgilio.it/ovunque-si/linux/english.html">wants to
write a backend</a>.
</p>

8
unsupported/hp-scanjet-2400c.html
Wyświetl plik

@ -31,11 +31,17 @@
</p>
<h2>Chipset</h2>
<p>
Maybe GL646_HP
</p>
<h2>Comments</h2>
<p>
If this is the GL646 chip, maybe the <a
href="http://www.meier-geinitz.de/sane/genesys-backend/">Genesys
backend</a> can be used, when it's finished?
</p>
<p>
<a
href="http://lists.alioth.debian.org/pipermail/sane-devel/2003-October/009104.html">Someone
href="http://lists.alioth.debian.org/pipermail/sane-devel/2003-October/009104.html">Someone else also
wants to write a backend</a>.
</p>
<p>

8
unsupported/hp-scanjet-3670c.html
Wyświetl plik

@ -30,6 +30,9 @@
0x1405
</p>
<h2>Chipset</h2>
<p>
Probably GL646_HP
</p>
<p>
Written on the chipset:
</p>
@ -46,6 +49,11 @@ M1B416256A
DZC1HF2GJ
</pre>
<h2>Comments</h2>
<p>
If this is the GL646 chip, maybe the <a
href="http://www.meier-geinitz.de/sane/genesys-backend/">Genesys
backend</a> can be used, when it's finished?
</p>
<p>
Same scanner as <a href="hp-scanjet-3690.html">3690</a>?
</p>

11
unsupported/hp-scanjet-3690.html
Wyświetl plik

@ -23,12 +23,16 @@
</p>
<h2>Vendor ID</h2>
<p>
0x03f0
</p>
<h2>Product ID</h2>
<p>
0x1405
</p>
<h2>Chipset</h2>
<p>
Probably GL646_HP
</p>
<pre>
26-00204-00A
0314FGKC9-10
@ -36,6 +40,11 @@
EliteMT 100Mhz
</pre>
<h2>Comments</h2>
<p>
If this is the GL646 chip, maybe the <a
href="http://www.meier-geinitz.de/sane/genesys-backend/">Genesys
backend</a> can be used, when it's finished?
</p>
<p>
Same scanner as <a href="hp-scanjet-3670c.html">3670c</a>?
</p>

1
unsupported/hp-scanjet-8290.html
Wyświetl plik

@ -32,6 +32,7 @@
</p>
<h2>Comments</h2>
<p>
Includes ADF and TA. Similar to 8200C?
</p>
<h2>Output of /proc/bus/usb/devices or sane-find-scanner -v -v</h2>
<pre>

204
unsupported/lexmark-x1150.html 100644
Wyświetl plik

@ -0,0 +1,204 @@
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<html>
<head>
<title>Scanner information</title>
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1">
<meta name="author" content="Henning Meier-Geinitz">
<meta name="keywords" content="sane, backend, driver, scanner, unsupported">
<link href="mailto:henning@meier-geinitz.de" rev="made">
<link rel="icon" href="/favicon.ico" type="image/x-icon">
<link rel="shortcut icon" href="/favicon.ico" type="image/x-icon">
</head>
<body>
<h1>Scanners not supported by SANE</h1>
<h2>Manufacturer and model</h2>
<p>
Lexmark X1150
</p>
<h2>Bus type</h2>
<p>
USB
</p>
<h2>Vendor ID</h2>
<p>
Vendor=043d
</p>
<h2>Product ID</h2>
<p>
ProdID=007c
</p>
<h2>Chipset</h2>
<p>
Realtek RTS8852B
</p>
<pre>
Board Number BJ4150M02001 Ver A-7
2 large processors :
Realtek RTS8852B-03 37012Q1 327F - PC-Based MFP Controller Chip ( close relative to .)
Lexmark 18K0205 330B31V ARM - Printer controller?
3 smaller ICs:
SN105082 37AC4LT 14D0205 Silicon Controlled Rectifier
BD6775 329 H91 NPN Darlington Transistor
24C01W6 B326L Serial EEPROM
</pre>
<h2>Comments</h2>
<p>
All in one job. Printer works fine with the z600 driver. Info on the
scanner chip (well the closes relative I can find) can be found <a
href="http://www.realtek.com.tw/products/products1-2.aspx?modelid=40">here</a>.
</p>
<h2>Output of /proc/bus/usb/devices or sane-find-scanner -v -v</h2>
<pre>
T: Bus=02 Lev=02 Prnt=06 Port=00 Cnt=01 Dev#= 7 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=043d ProdID=007c Rev= 1.00
S: Manufacturer=Lexmark
S: Product=X1100 Series
S: SerialNumber=5003470
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=ff Driver=(none)
E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 8 Ivl=0ms
E: Ad=83(I) Atr=03(Int.) MxPS= 1 Ivl=250ms
&lt;device descriptor of 0x043d/0x007c at 002:004&gt;
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 0
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x043D
idProduct 0x007C
bcdDevice 1.00
iManufacturer 1 ((null))
iProduct 2 ((null))
iSerialNumber 7 ((null))
bNumConfigurations 1
&lt;configuration 0&gt;
bLength 9
bDescriptorType 2
wTotalLength 39
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 6 ((null))
bmAttributes 224 (Self-poweredRemote Wakeup)
MaxPower 0 mA
&lt;interface 0&gt;
&lt;altsetting 0&gt;
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 3
bInterfaceClass 255
bInterfaceSubClass 0
bInterfaceProtocol 255
iInterface 9 ((null))
&lt;endpoint 0&gt;
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 (in 0x01)
bmAttributes 2 (bulk)
wMaxPacketSize 64
bInterval 0 ms
bRefresh 0
bSynchAddress 0
&lt;endpoint 1&gt;
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 (out 0x02)
bmAttributes 2 (bulk)
wMaxPacketSize 8
bInterval 0 ms
bRefresh 0
bSynchAddress 0
&lt;endpoint 2&gt;
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 (in 0x03)
bmAttributes 3 (interrupt)
wMaxPacketSize 1
bInterval 250 ms
bRefresh 0
bSynchAddress 0
&lt;trying to find out which USB chip is used&gt;
checking for GT-6801 ...
this is not a GT-6801 (bDeviceClass = 0)
checking for GT-6816 ...
this is not a GT-6816 (bNumEndpoints = 3)
checking for MA-1017 ...
this is not a MA-1017 (bDeviceClass = 0, bInterfaceClass = 255)
checking for MA-1015 ...
this is not a MA-1015 (bDeviceClass = 0)
checking for MA-1509 ...
this is not a MA-1509 (bDeviceClass = 0)
checking for LM983[1,2,3] ...
this is not a LM983x (bEndpointAddress = 0x81, bmAttributes = 0x2, wMaxPacketSize = 0x40, bInterval = 0x0)
checking for GL646 ...
this is not a GL646 (bDeviceClass = 0, bInterfaceClass = 255)
checking for GL660+GL646 ...
this is not a GL660+GL646 (bDeviceClass = 0, bInterfaceClass = 255)
&lt;Couldn't determine the type of the USB chip&gt;
found USB scanner (vendor=0x043d, product=0x007c) at libusb:002:004
</pre>
<h1>Want to add or correct information?</h1>
<p>
If anything is wrong or missing on this page please <a href="/bugs.html">file a bug report</a>
or use the <a href="http://www.meier-geinitz.de:80/tinc?key=rDoQ7lrj&#38;formname=adddev" target="_top">the
form for adding an unsupported device</a>.
</p>
<p>
If you own an unsupported scanner, please send as much information as
possible. Especially the output of <em>sane-find-scanner -v -v</em>
and/or <em>cat /proc/scsi/scsi</em> (for SCSI scanners) or <em>cat
/proc/bus/usb/devices</em> (for USB scanners) can help. If you dare to
open the scanner, have a look at the text that's printed on the
chips. That may help to identify the chipset. If you know that the
scanner is similar to another one (e.g. supported by the same Windows
driver), please also mention this fact.
</p>
<h1><a href="/manufacturers.html">Information for Manufacturers</a></h1>
<p>
Are you a manufacturer or vendor of scanners and one of your scanners is
not supported by SANE yet? In this case please have a look at our <a
href="/manufacturers.html">information for manufacturers</a>.
</p>
<h1>Links</h1>
<ul>
<li>
General information on how to <a href="/contrib.html">contribute to SANE</a>, e.g. by writing
backends
</li>
<li>
<a
href="/cgi-bin/driver.pl">Scanner
search engine</a>
</li>
<li>
<a href="http://www.sane-project.org/">SANE homepage</a>
</li>
</ul>
<hr>
<p>
<a href="/">SANE homepage</a><br>
<a href="/imprint.html">Contact</a>
</p>
<p>
<font size="-1">$Date$ $Author$</font>
</p>
</body>
</html>

3
unsupported/medion-MD5345.html
Wyświetl plik

@ -19,7 +19,8 @@
Tevion MD 6228<br>
Medion MD 5345<br>
Tevion MD 5345<br>
Medion MD 6471
Medion MD 6471<br>
Primax Slim-Line 1200
</p>
<h2>Bus type</h2>
<p>