mirror
/
sane-project-website
kopia lustrzana https://gitlab.com/sane-project/website
1
0
Forkuj 0
Kod Zgłoszenia Projekty Wydania Wiki Aktywność

Added and updated several scanners.

merge-requests/1/head
Henning Geinitz 2005-04-17 21:37:17 +00:00
rodzic 5b48c7b9df
commit 289daa1e9c
12 zmienionych plików z 1056 dodań i 12 usunięć
Pokaż statystyki Ściągnij plik aktualizacji Ściągnij plik porównania Expand all files Collapse all files

92
unsupported/hp-scanjet-4070.html
Wyświetl plik

@ -50,6 +50,98 @@ I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=ff Driver=(none)
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=83(I) Atr=03(Int.) MxPS= 1 Ivl=256ms
<device descriptor of 0x03f0/0x2405 at 001:003 (hewlett packard hp scanjet)>
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x03F0
idProduct 0x2405
bcdDevice 1.00
iManufacturer 1 (hewlett packard)
iProduct 2 (hp scanjet)
iSerialNumber 3 (CN49VALCJFRW)
bNumConfigurations 1
<configuration 0>
bLength 9
bDescriptorType 2
wTotalLength 39
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 4 (USB SCANNER)
bmAttributes 224 (Self-poweredRemote Wakeup)
MaxPower 2 mA
<interface 0>
<altsetting 0>
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 3
bInterfaceClass 255
bInterfaceSubClass 0
bInterfaceProtocol 255
iInterface 5 (Bulk-In, Bulk-Out, Interrupt Interface)
<endpoint 0>
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 (in 0x01)
bmAttributes 2 (bulk)
wMaxPacketSize 512
bInterval 0 ms
bRefresh 0
bSynchAddress 0
<endpoint 1>
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 (out 0x02)
bmAttributes 2 (bulk)
wMaxPacketSize 512
bInterval 0 ms
bRefresh 0
bSynchAddress 0
<endpoint 2>
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 (in 0x03)
bmAttributes 3 (interrupt)
wMaxPacketSize 1
bInterval 12 ms
bRefresh 0
bSynchAddress 0
<trying to find out which USB chip is used>
checking for GT-6801 ...
this is not a GT-6801 (bDeviceClass = 0)
checking for GT-6816 ...
this is not a GT-6816 (bcdUSB = 0x200)
checking for GT-8911 ...
this is not a GT-8911 (check 2, bcdUSB = 0x200)
checking for MA-1017 ...
this is not a MA-1017 (bDeviceClass = 0, bInterfaceClass = 255)
checking for MA-1015 ...
this is not a MA-1015 (bDeviceClass = 0)
checking for MA-1509 ...
this is not a MA-1509 (bDeviceClass = 0)
checking for LM983[1,2,3] ...
this is not a LM983x (bcdUSB = 0x200)
checking for GL646 ...
this is not a GL646 (bDeviceClass = 0, bInterfaceClass = 255)
checking for GL646_HP ...
this is not a GL646_HP (bDeviceClass = 0, bInterfaceClass = 255)
checking for GL660+GL646 ...
this is not a GL660+GL646 (bDeviceClass = 0, bInterfaceClass = 255)
checking for GL841 ...
this is not a GL841 (bDeviceClass = 0, bInterfaceClass = 255)
checking for ICM532B ...
this is not a ICM532B (check 1, bDeviceClass = 0, bInterfaceClass = 255)
<Couldn't determine the type of the USB chip>
found USB scanner (vendor=0x03f0 [hewlett packard], product=0x2405 [hp scanjet]) at libusb:001:003
</pre>
<h1>Want to add or correct information?</h1>

198
unsupported/hp-scanjet-5590.html 100644
Wyświetl plik

@ -0,0 +1,198 @@
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<html>
<head>
<title>Scanner information</title>
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1">
<meta name="author" content="Henning Meier-Geinitz">
<meta name="keywords" content="sane, backend, driver, scanner, unsupported">
<link href="mailto:henning@meier-geinitz.de" rev="made">
<link rel="icon" href="/favicon.ico" type="image/x-icon">
<link rel="shortcut icon" href="/favicon.ico" type="image/x-icon">
</head>
<body>
<h1>Scanners not supported by SANE</h1>
<h2>Manufacturer and model</h2>
<p>
Hewlett Packard ScanJet 5590
</p>
<h2>Bus type</h2>
<p>
USB
</p>
<h2>Vendor ID</h2>
<p>
0x03f0
</p>
<h2>Product ID</h2>
<p>
0x1705
</p>
<h2>Chipset</h2>
<p>
</p>
<h2>Comments</h2>
<p>
</p>
<h2>Output of /proc/bus/usb/devices or sane-find-scanner -v -v or lsusb -vv</h2>
<pre>
T: Bus=03 Lev=01 Prnt=01 Port=05 Cnt=01 Dev#= 10 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=ff(vend.) Sub=ff Prot=ff MxPS=64 #Cfgs= 1
P: Vendor=03f0 ProdID=1705 Rev= 3.05
S: Manufacturer=Hewlett-Packard
S: Product=hp scanjet scanner
S: SerialNumber=CN44HT604C
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 10mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=83(I) Atr=03(Int.) MxPS= 1 Ivl=16ms
&lt;device descriptor of 0x03f0/0x1705 at 003:010 (Hewlett-Packard hp scanjet scann
er)&gt;
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 255
bDeviceSubClass 255
bDeviceProtocol 255
bMaxPacketSize0 64
idVendor 0x03F0
idProduct 0x1705
bcdDevice 3.05
iManufacturer 1 (Hewlett-Packard)
iProduct 2 (hp scanjet scanner)
iSerialNumber 12 (CN44HT604C)
bNumConfigurations 1
&lt;configuration 0&gt;
bLength 9
bDescriptorType 2
wTotalLength 39
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0 ()
bmAttributes 192 (Self-powered)
MaxPower 10 mA
&lt;interface 0&gt;
&lt;altsetting 0&gt;
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 3
bInterfaceClass 255
bInterfaceSubClass 255
bInterfaceProtocol 255
iInterface 0 ()
&lt;endpoint 0&gt;
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 (in 0x01)
bmAttributes 2 (bulk)
wMaxPacketSize 512
bInterval 0 ms
bRefresh 0
bSynchAddress 0
&lt;endpoint 1&gt;
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 (out 0x02)
bmAttributes 2 (bulk)
wMaxPacketSize 512
bInterval 0 ms
bRefresh 0
bSynchAddress 0
&lt;endpoint 2&gt;
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 (in 0x03)
bmAttributes 3 (interrupt)
wMaxPacketSize 1
bInterval 8 ms
bRefresh 0
bSynchAddress 0
&lt;trying to find out which USB chip is used&gt;
checking for GT-6801 ...
this is not a GT-6801 (bcdUSB = 0x200)
checking for GT-6816 ...
this is not a GT-6816 (bDeviceClass = 255, bInterfaceClass = 255)
checking for GT-8911 ...
this is not a GT-8911 (check 1, bDeviceClass = 255, bInterfaceClass = 255)
checking for MA-1017 ...
this is not a MA-1017 (bDeviceClass = 255, bInterfaceClass = 255)
checking for MA-1015 ...
this is not a MA-1015 (bcdUSB = 0x200)
checking for MA-1509 ...
this is not a MA-1509 (bcdUSB = 0x200)
checking for LM983[1,2,3] ...
this is not a LM983x (bcdUSB = 0x200)
checking for GL646 ...
this is not a GL646 (bDeviceClass = 255, bInterfaceClass = 255)
checking for GL646_HP ...
this is not a GL646_HP (bcdUSB = 0x200)
checking for GL660+GL646 ...
this is not a GL660+GL646 (bDeviceClass = 255, bInterfaceClass = 255)
checking for GL841 ...
this is not a GL841 (reg 0x38 != 0x15)
checking for ICM532B ...
this is not a ICM532B (check 2, bcdUSB = 0x200)
&lt;Couldn't determine the type of the USB chip&gt;
found USB scanner (vendor=0x03f0 [Hewlett-Packard], product=0x1705 [hp scanjet scanner]) at libusb:003:010
</pre>
<h1>Want to add or correct information?</h1>
<p>
If anything is wrong or missing on this page please <a href="/bugs.html">file a bug report</a>
or use the <a href="http://www.meier-geinitz.de:80/tinc?key=rDoQ7lrj&#38;formname=adddev" target="_top">the
form for adding an unsupported device</a>.
</p>
<p>
If you own an unsupported scanner, please send as much information as
possible. Especially the output of <em>sane-find-scanner -v -v</em>
and/or <em>cat /proc/scsi/scsi</em> (for SCSI scanners) or <em>cat
/proc/bus/usb/devices</em> (for USB scanners) can help. If you dare to
open the scanner, have a look at the text that's printed on the
chips. That may help to identify the chipset. If you know that the
scanner is similar to another one (e.g. supported by the same Windows
driver), please also mention this fact.
</p>
<h1><a href="/manufacturers.html">Information for Manufacturers</a></h1>
<p>
Are you a manufacturer or vendor of scanners and one of your scanners is
not supported by SANE yet? In this case please have a look at our <a
href="/manufacturers.html">information for manufacturers</a>.
</p>
<h1>Links</h1>
<ul>
<li>
General information on how to <a href="/contrib.html">contribute to SANE</a>, e.g. by writing
backends
</li>
<li>
<a
href="/cgi-bin/driver.pl">Scanner
search engine</a>
</li>
<li>
<a href="http://www.sane-project.org/">SANE homepage</a>
</li>
</ul>
<hr>
<p>
<a href="/">SANE homepage</a><br>
<a href="/imprint.html">Contact</a>
</p>
<p>
<font size="-1">$Date$ $Author$</font>
</p>
</body>
</html>

110
unsupported/lexmark-x5250.html 100644
Wyświetl plik

@ -0,0 +1,110 @@
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<html>
<head>
<title>Scanner information</title>
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1">
<meta name="author" content="Henning Meier-Geinitz">
<meta name="keywords" content="sane, backend, driver, scanner, unsupported">
<link href="mailto:henning@meier-geinitz.de" rev="made">
<link rel="icon" href="/favicon.ico" type="image/x-icon">
<link rel="shortcut icon" href="/favicon.ico" type="image/x-icon">
</head>
<body>
<h1>Scanners not supported by SANE</h1>
<h2>Manufacturer and model</h2>
<p>
Lexmark X5250
</p>
<h2>Bus type</h2>
<p>
USB
</p>
<h2>Vendor ID</h2>
<p>
0x043D
</p>
<h2>Product ID</h2>
<p>
0x0093
</p>
<h2>Chipset</h2>
<p>
</p>
<h2>Comments</h2>
<p>
</p>
<h2>Output of /proc/bus/usb/devices or sane-find-scanner -v -v or lsusb -vv</h2>
<pre>
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
D: Ver= 2.00 Cls=00(&gt;ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=043d ProdID=0093 Rev= 0.01
S: Manufacturer=Lexmark
S: Product=Lexmark 5200 Series
S: SerialNumber=21D0185113002MM
C:* #Ifs= 3 Cfg#= 1 Atr=c0 MxPwr= 16mA
I: If#= 0 Alt= 0 #EPs= 4 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=87(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=07(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I: If#= 1 Alt= 0 #EPs= 2 Cls=07(print) Sub=01 Prot=02 Driver=usblp
E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I: If#= 2 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00 Driver=usbhid
E: Ad=83(I) Atr=03(Int.) MxPS= 8 Ivl=100ms
</pre>
<h1>Want to add or correct information?</h1>
<p>
If anything is wrong or missing on this page please <a href="/bugs.html">file a bug report</a>
or use the <a href="http://www.meier-geinitz.de:80/tinc?key=rDoQ7lrj&#38;formname=adddev" target="_top">the
form for adding an unsupported device</a>.
</p>
<p>
If you own an unsupported scanner, please send as much information as
possible. Especially the output of <em>sane-find-scanner -v -v</em>
and/or <em>cat /proc/scsi/scsi</em> (for SCSI scanners) or <em>cat
/proc/bus/usb/devices</em> (for USB scanners) can help. If you dare to
open the scanner, have a look at the text that's printed on the
chips. That may help to identify the chipset. If you know that the
scanner is similar to another one (e.g. supported by the same Windows
driver), please also mention this fact.
</p>
<h1><a href="/manufacturers.html">Information for Manufacturers</a></h1>
<p>
Are you a manufacturer or vendor of scanners and one of your scanners is
not supported by SANE yet? In this case please have a look at our <a
href="/manufacturers.html">information for manufacturers</a>.
</p>
<h1>Links</h1>
<ul>
<li>
General information on how to <a href="/contrib.html">contribute to SANE</a>, e.g. by writing
backends
</li>
<li>
<a
href="/cgi-bin/driver.pl">Scanner
search engine</a>
</li>
<li>
<a href="http://www.sane-project.org/">SANE homepage</a>
</li>
</ul>
<hr>
<p>
<a href="/">SANE homepage</a><br>
<a href="/imprint.html">Contact</a>
</p>
<p>
<font size="-1">$Date$ $Author$</font>
</p>
</body>
</html>

104
unsupported/microtek-scanmaker-6100.html 100644
Wyświetl plik

@ -0,0 +1,104 @@
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<html>
<head>
<title>Scanner information</title>
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1">
<meta name="author" content="Henning Meier-Geinitz">
<meta name="keywords" content="sane, backend, driver, scanner, unsupported">
<link href="mailto:henning@meier-geinitz.de" rev="made">
<link rel="icon" href="/favicon.ico" type="image/x-icon">
<link rel="shortcut icon" href="/favicon.ico" type="image/x-icon">
</head>
<body>
<h1>Scanners not supported by SANE</h1>
<h2>Manufacturer and model</h2>
<p>
Microtek ScanMaker 6100
</p>
<h2>Bus type</h2>
<p>
USB
</p>
<h2>Vendor ID</h2>
<p>
0x05da
</p>
<h2>Product ID</h2>
<p>
0x30E5
</p>
<h2>Chipset</h2>
<p>
</p>
<h2>Comments</h2>
<p>
</p>
<h2>Output of /proc/bus/usb/devices or sane-find-scanner -v -v or lsusb -vv</h2>
<pre>
T: Bus=04 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 3 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(&gt;ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=05da ProdID=30e5 Rev= 1.00
S: Manufacturer=Prolific Technology Inc.
S: Product=USB Scanner
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=100mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=83(I) Atr=03(Int.) MxPS= 1 Ivl=500us
</pre>
<h1>Want to add or correct information?</h1>
<p>
If anything is wrong or missing on this page please <a href="/bugs.html">file a bug report</a>
or use the <a href="http://www.meier-geinitz.de:80/tinc?key=rDoQ7lrj&#38;formname=adddev" target="_top">the
form for adding an unsupported device</a>.
</p>
<p>
If you own an unsupported scanner, please send as much information as
possible. Especially the output of <em>sane-find-scanner -v -v</em>
and/or <em>cat /proc/scsi/scsi</em> (for SCSI scanners) or <em>cat
/proc/bus/usb/devices</em> (for USB scanners) can help. If you dare to
open the scanner, have a look at the text that's printed on the
chips. That may help to identify the chipset. If you know that the
scanner is similar to another one (e.g. supported by the same Windows
driver), please also mention this fact.
</p>
<h1><a href="/manufacturers.html">Information for Manufacturers</a></h1>
<p>
Are you a manufacturer or vendor of scanners and one of your scanners is
not supported by SANE yet? In this case please have a look at our <a
href="/manufacturers.html">information for manufacturers</a>.
</p>
<h1>Links</h1>
<ul>
<li>
General information on how to <a href="/contrib.html">contribute to SANE</a>, e.g. by writing
backends
</li>
<li>
<a
href="/cgi-bin/driver.pl">Scanner
search engine</a>
</li>
<li>
<a href="http://www.sane-project.org/">SANE homepage</a>
</li>
</ul>
<hr>
<p>
<a href="/">SANE homepage</a><br>
<a href="/imprint.html">Contact</a>
</p>
<p>
<font size="-1">$Date$ $Author$</font>
</p>
</body>
</html>

92
unsupported/minolta-dimage-scan-multi-pro.html 100644
Wyświetl plik

@ -0,0 +1,92 @@
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<html>
<head>
<title>Scanner information</title>
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1">
<meta name="author" content="Henning Meier-Geinitz">
<meta name="keywords" content="sane, backend, driver, scanner, unsupported">
<link href="mailto:henning@meier-geinitz.de" rev="made">
<link rel="icon" href="/favicon.ico" type="image/x-icon">
<link rel="shortcut icon" href="/favicon.ico" type="image/x-icon">
</head>
<body>
<h1>Scanners not supported by SANE</h1>
<h2>Manufacturer and model</h2>
<p>
Minolta Dimage Scan Multi Pro
</p>
<h2>Bus type</h2>
<p>
IEEE-1394
</p>
<h2>Vendor ID</h2>
<p>
</p>
<h2>Product ID</h2>
<p>
</p>
<h2>Chipset</h2>
<p>
</p>
<h2>Comments</h2>
<p>
35mm to 6x9cm film scanner.
</p>
<h2>Output of /proc/bus/usb/devices or sane-find-scanner -v -v or lsusb -vv</h2>
<pre>
</pre>
<h1>Want to add or correct information?</h1>
<p>
If anything is wrong or missing on this page please <a href="/bugs.html">file a bug report</a>
or use the <a href="http://www.meier-geinitz.de:80/tinc?key=rDoQ7lrj&#38;formname=adddev" target="_top">the
form for adding an unsupported device</a>.
</p>
<p>
If you own an unsupported scanner, please send as much information as
possible. Especially the output of <em>sane-find-scanner -v -v</em>
and/or <em>cat /proc/scsi/scsi</em> (for SCSI scanners) or <em>cat
/proc/bus/usb/devices</em> (for USB scanners) can help. If you dare to
open the scanner, have a look at the text that's printed on the
chips. That may help to identify the chipset. If you know that the
scanner is similar to another one (e.g. supported by the same Windows
driver), please also mention this fact.
</p>
<h1><a href="/manufacturers.html">Information for Manufacturers</a></h1>
<p>
Are you a manufacturer or vendor of scanners and one of your scanners is
not supported by SANE yet? In this case please have a look at our <a
href="/manufacturers.html">information for manufacturers</a>.
</p>
<h1>Links</h1>
<ul>
<li>
General information on how to <a href="/contrib.html">contribute to SANE</a>, e.g. by writing
backends
</li>
<li>
<a
href="/cgi-bin/driver.pl">Scanner
search engine</a>
</li>
<li>
<a href="http://www.sane-project.org/">SANE homepage</a>
</li>
</ul>
<hr>
<p>
<a href="/">SANE homepage</a><br>
<a href="/imprint.html">Contact</a>
</p>
<p>
<font size="-1">$Date$ $Author$</font>
</p>
</body>
</html>

108
unsupported/plustek-opticpro-st12.html
Wyświetl plik

@ -28,19 +28,22 @@
</p>
<h2>Product ID</h2>
<p>
0x040b
0x040b / 0x0600
</p>
<h2>Chipset</h2>
<p>
GT6816.
GT6816 (0x040b) / GL646 (0x0600).
</p>
<h2>Comments</h2>
<p>
It was previously mentioned that this scanner uses a GL646, but this seems
to be wrong. So it may be supported by the gt68xx backend in future.
It was previously mentioned that this scanner (product id 0x040b) uses a GL646, but this seems
to be wrong. So it may be supported by the gt68xx backend in
future. However, there are newer reports that the product id is is 0x0600
and that this model uses a gl646. Strange. Please send more reports!
</p>
<h2>Output of /proc/bus/usb/devices or sane-find-scanner -v -v</h2>
<pre>
Product id 0x040b:
&lt;device descriptor of 0x07b3/0x040b at 002:003 (600DPI USB Scanner)&gt;
bLength               18
bDescriptorType       1
@ -101,7 +104,102 @@ bNumConfigurations
    checking for GT-6816 ...
&lt;This USB chip looks like a GT-6816&gt;
found USB scanner (vendor=0x07b3, product=0x040b [600DPI USB Scanner], chip=GT-6816) at libusb:002:003
found USB scanner (vendor=0x07b3, product=0x040b [600DPI USB Scanner],
chip=GT-6816) at libusb:002:003
Product id 0x0600:
T: Bus=03 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 3 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=00(&gt;ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=07b3 ProdID=0600 Rev= 0.00
S: Manufacturer=PLUSTEK INC
S: Product=USB SCANNER
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 48mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=10(unk. ) Sub=01 Prot=00 Driver=(none)
E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=83(I) Atr=03(Int.) MxPS= 1 Ivl=8ms
device descriptor of 0x07b3/0x0600 at 003:003 (PLUSTEK INC USB SCANNER)&gt;
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 0
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x07B3
idProduct 0x0600
bcdDevice 0.00
iManufacturer 10 (PLUSTEK INC)
iProduct 11 (USB SCANNER)
iSerialNumber 0 ()
bNumConfigurations 1
&lt;configuration 0&gt;
bLength 9
bDescriptorType 2
wTotalLength 39
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0 ()
bmAttributes 224 (Self-poweredRemote Wakeup)
MaxPower 48 mA
&lt;interface 0&gt;
&lt;altsetting 0&gt;
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 3
bInterfaceClass 16
bInterfaceSubClass 1
bInterfaceProtocol 0
iInterface 0 ()
&lt;endpoint 0&gt;
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 (in 0x01)
bmAttributes 2 (bulk)
wMaxPacketSize 64
bInterval 0 ms
bRefresh 0
bSynchAddress 0
&lt;endpoint 1&gt;
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 (out 0x02)
bmAttributes 2 (bulk)
wMaxPacketSize 64
bInterval 0 ms
bRefresh 0
bSynchAddress 0
&lt;endpoint 2&gt;
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 (in 0x03)
bmAttributes 3 (interrupt)
wMaxPacketSize 1
bInterval 8 ms
bRefresh 0
bSynchAddress 0
&lt;trying to find out which USB chip is used&gt;
checking for GT-6801 ...
this is not a GT-6801 (bDeviceClass = 0)
checking for GT-6816 ...
this is not a GT-6816 (bDeviceClass = 0, bInterfaceClass = 16)
checking for MA-1017 ...
this is not a MA-1017 (bDeviceClass = 0, bInterfaceClass = 16)
checking for MA-1015 ...
this is not a MA-1015 (bDeviceClass = 0)
checking for MA-1509 ...
this is not a MA-1509 (bDeviceClass = 0)
checking for LM983[1,2,3] ...
this is not a LM983x (bDeviceClass = 0, bInterfaceClass = 16)
checking for GL646 ...
&lt;This USB chip looks like a GL646&gt;
found USB scanner (vendor=0x07b3 [PLUSTEK INC], product=0x0600 [USB SCANNER], chip=GL646) at libusb:003:003
</pre>
<h1>Want to add or correct information?</h1>

118
unsupported/primax-colorado-usb-9600.html 100644
Wyświetl plik

@ -0,0 +1,118 @@
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<html>
<head>
<title>Scanner information</title>
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1">
<meta name="author" content="Henning Meier-Geinitz">
<meta name="keywords" content="sane, backend, driver, scanner, unsupported">
<link href="mailto:henning@meier-geinitz.de" rev="made">
<link rel="icon" href="/favicon.ico" type="image/x-icon">
<link rel="shortcut icon" href="/favicon.ico" type="image/x-icon">
</head>
<body>
<h1>Scanners not supported by SANE</h1>
<h2>Manufacturer and model</h2>
<p>
Primax Colorade USB 9600
</p>
<h2>Bus type</h2>
<p>
USB
</p>
<h2>Vendor ID</h2>
<p>
0x0461
</p>
<h2>Product ID</h2>
<p>
0x0340
</p>
<h2>Chipset</h2>
<pre>
</pre>
------------ IC1 -----------------------------
EICI 0910oo (oo this is small number zero 00)
F98380285
-----------------------------------------------
------------------------- IC11 ----------------
WM 8143-12C
86AD4ET4C
----------------------------------------------
--------------------------- IC8 ---------------
ScanLogic SL11 982628PLCC-1.1 A003 Taiwan
-----------------------------------------------
----------------------------------------------
On electric bord describes:
EPCB0J400A-1
and decribes
ASYM104250-A
Y42MV83400
----------------------------------------------
<p>
It seems the EICI 091000 is the scanner chip interface par. port. The
scanlogic SL11 (now Cypress) is the par. port to usb converter bridge. For
info EICI 091000 <a href="http://primax.sourceforge.net/part_numbers.html">see also here</a>.
</p>
<h2>Comments</h2>
<p>
</p>
<h2>Output of /proc/bus/usb/devices or sane-find-scanner -v -v or lsusb -vv</h2>
<pre>
</pre>
<h1>Want to add or correct information?</h1>
<p>
If anything is wrong or missing on this page please <a href="/bugs.html">file a bug report</a>
or use the <a href="http://www.meier-geinitz.de:80/tinc?key=rDoQ7lrj&#38;formname=adddev" target="_top">the
form for adding an unsupported device</a>.
</p>
<p>
If you own an unsupported scanner, please send as much information as
possible. Especially the output of <em>sane-find-scanner -v -v</em>
and/or <em>cat /proc/scsi/scsi</em> (for SCSI scanners) or <em>cat
/proc/bus/usb/devices</em> (for USB scanners) can help. If you dare to
open the scanner, have a look at the text that's printed on the
chips. That may help to identify the chipset. If you know that the
scanner is similar to another one (e.g. supported by the same Windows
driver), please also mention this fact.
</p>
<h1><a href="/manufacturers.html">Information for Manufacturers</a></h1>
<p>
Are you a manufacturer or vendor of scanners and one of your scanners is
not supported by SANE yet? In this case please have a look at our <a
href="/manufacturers.html">information for manufacturers</a>.
</p>
<h1>Links</h1>
<ul>
<li>
General information on how to <a href="/contrib.html">contribute to SANE</a>, e.g. by writing
backends
</li>
<li>
<a
href="/cgi-bin/driver.pl">Scanner
search engine</a>
</li>
<li>
<a href="http://www.sane-project.org/">SANE homepage</a>
</li>
</ul>
<hr>
<p>
<a href="/">SANE homepage</a><br>
<a href="/imprint.html">Contact</a>
</p>
<p>
<font size="-1">$Date$ $Author$</font>
</p>
</body>
</html>

8
unsupported/tevion-md90009.html
Wyświetl plik

@ -31,11 +31,15 @@
</p>
<h2>Chipset</h2>
<p>
Perhaps <a href="http://www.prolific.com.tw/eng/Products-2.asp?ID=8">PL-2555 or PL-2551</a>?
Perhaps <a
href="http://www.prolific.com.tw/eng/Products-2.asp?ID=8">PL-2555 or
PL-2551</a>?
</p>
<h2>Comments</h2>
<p>
Available since 2005-03-09 in German Aldi supermarkets.
Same vendor/product ids as <a
href="http://www.sane-project.org/unsupported/microtek-scanmaker-6000.html">Microtek
Scanmaker 6000</a>. Available since 2005-03-09 in German Aldi supermarkets.
</p>
<h2>Output of /proc/bus/usb/devices or sane-find-scanner -v -v or lsusb -vv</h2>
<pre>

23
unsupported/trust-combiscan-19200.html
Wyświetl plik

@ -18,7 +18,8 @@
Trust CombiScan 19200<br>
Boeder Sm@rtScan Office<br>
Avigramm Minidoc<br>
Compeye Simplex 1236C
Compeye Simplex 1236C<br>
Memorex MaxxScan 6122
</p>
<h2>Bus type</h2>
<p>
@ -26,7 +27,7 @@
</p>
<h2>Vendor ID</h2>
<p>
0x5cb
0x05cb
</p>
<h2>Product ID</h2>
<p>
@ -45,10 +46,14 @@
</p>
<h2>Comments</h2>
<p>
All four scanners have the same ids. The vendor is PowerVision
Technologies. At lest the Avigram was sold as a scanner for
All scanners have the same ids. The vendor is PowerVision
Technologies. At least the Avigram was sold as a scanner for
notebooks/mobile use.
</p>
<p>
Memorex explained that it's originally a Visioneer scanner (?).
</p>
<p>
A user reports about using his Boeder scanner's parallel port:<br> 2 years
ago i used the parallel bus of my scanner, and it worked. What i did was
@ -102,6 +107,16 @@ C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr=100mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=00(&gt;ifc ) Sub=00 Prot=00 Driver=(none)
E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=83(I) Atr=03(Int.) MxPS= 1 Ivl=1ms
Memorex MaxxScan 6122
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
D: Ver= 1.00 Cls=00(&gt;ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=05cb ProdID=1483 Rev= 1.00
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr=100mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=00(&gt;ifc ) Sub=00 Prot=00 Driver=(none)
E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=83(I) Atr=03(Int.) MxPS= 1 Ivl=1ms
</pre>

92
unsupported/visioneer-onetouch4800.html
Wyświetl plik

@ -61,6 +61,98 @@ E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 8 Ivl=0ms
E: Ad=83(I) Atr=03(Int.) MxPS= 1 Ivl=250ms
&lt;device descriptor of 0x04a7/0x0224 at 002:002&gt;
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 0
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x04A7
idProduct 0x0224
bcdDevice 1.00
iManufacturer 1 ((null))
iProduct 2 ((null))
iSerialNumber 8 ((null))
bNumConfigurations 1
&lt;configuration 0&gt;
bLength 9
bDescriptorType 2
wTotalLength 39
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 6 ((null))
bmAttributes 224 (Self-poweredRemote Wakeup)
MaxPower 0 mA
&lt;interface 0&gt;
&lt;altsetting 0&gt;
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 3
bInterfaceClass 0
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 7 ((null))
&lt;endpoint 0&gt;
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 (in 0x01)
bmAttributes 2 (bulk)
wMaxPacketSize 64
bInterval 0 ms
bRefresh 0
bSynchAddress 0
&lt;endpoint 1&gt;
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 (out 0x02)
bmAttributes 2 (bulk)
wMaxPacketSize 8
bInterval 0 ms
bRefresh 0
bSynchAddress 0
&lt;endpoint 2&gt;
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 (in 0x03)
bmAttributes 3 (interrupt)
wMaxPacketSize 1
bInterval 250 ms
bRefresh 0
bSynchAddress 0
&lt;trying to find out which USB chip is used&gt;
checking for GT-6801 ...
this is not a GT-6801 (bDeviceClass = 0)
checking for GT-6816 ...
this is not a GT-6816 (bDeviceClass = 0, bInterfaceClass = 0)
checking for GT-8911 ...
this is not a GT-8911 (check 1, bDeviceClass = 0, bInterfaceClass = 0)
checking for MA-1017 ...
this is not a MA-1017 (bcdUSB = 0x110)
checking for MA-1015 ...
this is not a MA-1015 (bDeviceClass = 0)
checking for MA-1509 ...
this is not a MA-1509 (bDeviceClass = 0)
checking for LM983[1,2,3] ...
this is not a LM983x (bDeviceClass = 0, bInterfaceClass = 0)
checking for GL646 ...
this is not a GL646 (bDeviceClass = 0, bInterfaceClass = 0)
checking for GL646_HP ...
this is not a GL646_HP (bDeviceClass = 0, bInterfaceClass = 0)
checking for GL660+GL646 ...
this is not a GL660+GL646 (bDeviceClass = 0, bInterfaceClass = 0)
checking for GL841 ...
this is not a GL841 (bDeviceClass = 0, bInterfaceClass = 0)
checking for ICM532B ...
this is not a ICM532B (check 1, bDeviceClass = 0, bInterfaceClass = 0)
&lt;Couldn't determine the type of the USB chip&gt;
found USB scanner (vendor=0x04a7, product=0x0224) at libusb:002:002
Vantas 3000:
T: Bus=02 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#= 10 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=00(&gt;ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1

96
unsupported/visioneer-onetouch6600.html 100644
Wyświetl plik

@ -0,0 +1,96 @@
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<html>
<head>
<title>Scanner information</title>
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1">
<meta name="author" content="Henning Meier-Geinitz">
<meta name="keywords" content="sane, backend, driver, scanner, unsupported">
<link href="mailto:henning@meier-geinitz.de" rev="made">
<link rel="icon" href="/favicon.ico" type="image/x-icon">
<link rel="shortcut icon" href="/favicon.ico" type="image/x-icon">
</head>
<body>
<h1>Scanners not supported by SANE</h1>
<h2>Manufacturer and model</h2>
<p>
Visioneer Onetouch 6600
</p>
<h2>Bus type</h2>
<p>
USB
</p>
<h2>Vendor ID</h2>
<p>
0x04a7
</p>
<h2>Product ID</h2>
<p>
0x022a
</p>
<h2>Chipset</h2>
<p>
GL646?<br>
Number printed on chip: 610800009609
</p>
<h2>Comments</h2>
<p>
</p>
<h2>Output of /proc/bus/usb/devices or sane-find-scanner -v -v or lsusb -vv</h2>
<pre>
</pre>
<h1>Want to add or correct information?</h1>
<p>
If anything is wrong or missing on this page please <a href="/bugs.html">file a bug report</a>
or use the <a href="http://www.meier-geinitz.de:80/tinc?key=rDoQ7lrj&#38;formname=adddev" target="_top">the
form for adding an unsupported device</a>.
</p>
<p>
If you own an unsupported scanner, please send as much information as
possible. Especially the output of <em>sane-find-scanner -v -v</em>
and/or <em>cat /proc/scsi/scsi</em> (for SCSI scanners) or <em>cat
/proc/bus/usb/devices</em> (for USB scanners) can help. If you dare to
open the scanner, have a look at the text that's printed on the
chips. That may help to identify the chipset. If you know that the
scanner is similar to another one (e.g. supported by the same Windows
driver), please also mention this fact.
</p>
<h1><a href="/manufacturers.html">Information for Manufacturers</a></h1>
<p>
Are you a manufacturer or vendor of scanners and one of your scanners is
not supported by SANE yet? In this case please have a look at our <a
href="/manufacturers.html">information for manufacturers</a>.
</p>
<h1>Links</h1>
<ul>
<li>
General information on how to <a href="/contrib.html">contribute to SANE</a>, e.g. by writing
backends
</li>
<li>
<a
href="/cgi-bin/driver.pl">Scanner
search engine</a>
</li>
<li>
<a href="http://www.sane-project.org/">SANE homepage</a>
</li>
</ul>
<hr>
<p>
<a href="/">SANE homepage</a><br>
<a href="/imprint.html">Contact</a>
</p>
<p>
<font size="-1">$Date$ $Author$</font>
</p>
</body>
</html>

27
unsupported/xerox-2400-onetouch.html
Wyświetl plik

@ -31,13 +31,15 @@
</p>
<h2>Chipset</h2>
<p>
GL646_HP
</p>
<h2>Comments</h2>
<p>
As the chip is GL646_HP it may be supported by the genesys backend later.
</p>
<h2>Output of /proc/bus/usb/devices or sane-find-scanner -v -v</h2>
<pre>
&lt;device descriptor of 0x0461/0x038b at 001:003 (Primax USB Scanner)&gt;
&lt;device descriptor of 0x0461/0x038b at 003:002 (Primax USB Scanner)&gt;
bLength 18
bDescriptorType 1
bcdUSB 1.10
@ -99,6 +101,29 @@ bNumConfigurations 1
bInterval 8 ms
bRefresh 0
bSynchAddress 0
&lt;trying to find out which USB chip is used&gt;
checking for GT-6801 ...
this is not a GT-6801 (bNumEndpoints = 3)
checking for GT-6816 ...
this is not a GT-6816 (bDeviceClass = 255, bInterfaceClass = 255)
checking for GT-8911 ...
this is not a GT-8911 (check 1, bDeviceClass = 255, bInterfaceClass = 255)
checking for MA-1017 ...
this is not a MA-1017 (bDeviceClass = 255, bInterfaceClass = 255)
checking for MA-1015 ...
this is not a MA-1015 (bcdUSB = 0x110)
checking for MA-1509 ...
this is not a MA-1509 (bEndpointAddress = 0x2, bmAttributes = 0x2, wMaxPacketSize = 0x40)
checking for LM983[1,2,3] ...
this is not a LM983x (bDeviceSubClass = 0xff)
checking for GL646 ...
this is not a GL646 (bDeviceClass = 255, bInterfaceClass = 255)
checking for GL646_HP ...
&lt;This USB chip looks like a GL646_HP&gt;
found USB scanner (vendor=0x0461 [Primax], product=0x038b [USB Scanner], chip=GL646_HP) at libusb:003:002
</pre>
<h1>Want to add or correct information?</h1>