mirror
/
sane-project-backends
kopia lustrzana https://gitlab.com/sane-project/backends
1
0
Forkuj 0
Kod Zgłoszenia Projekty Wydania Wiki Aktywność
7 202 Commity
33 Gałęzie
59 Tagi
58 MiB
Wykres commitów

164 Commity (ff534c16cb9ea5b51a0f89181a3c57d51bf7b7e3)

Autor SHA1 Wiadomość Data
Stéphane Voltz 49ebc601bf fix canon LiDE 210 button mapping 2011-09-07 06:45:16 +02:00
Stéphane Voltz 84d39e7188 MD5345 shading calibration fix 
- create a no move during shading calibration flag
- use this flag for MD5345
 2011-08-25 06:43:25 +02:00
Stéphane Voltz 656b79e6e2 activate calibration for G4050/G4010 and tune scanarea width 2011-08-22 07:00:24 +02:00
Stéphane Voltz 774f86861a G4050 parking issue fixed 
- use FEED flag for parking
 2011-08-12 07:55:52 +02:00
Stéphane Voltz e742139517 600 dpi working again for G4050 2011-08-11 21:59:37 +02:00
Stéphane Voltz 66fa10b91a re-tune MD5345/MD6228 scan area 2011-07-15 10:00:05 +02:00
Stéphane Voltz e827077bf3 binary logging change 
- removed old raw data logging
- added new binary data logging (gl847 only for now)
 2011-06-28 22:13:41 +02:00
Stéphane Voltz 245db82a37 HP2400 support from Alexey Osipov <simba@lerlan.ru> 
- applied and tweaked a patch from Alexey Osipov to complete
HP2400 support
 2011-06-13 21:52:05 +02:00
Stéphane Voltz 80254a558c move LIDE 100 to new description model, 2400 now available 2011-06-08 22:23:30 +02:00
Stéphane Voltz e2b633ef8b good for release 
- nice quality from 75 to 2400 dpi
- 4800 dpi shading improvement
- motor moving smoothing
 2011-06-08 21:55:59 +02:00
Stéphane Voltz c31eb26d1e LiDE 200 almost OK 
- 1200 dpi scans hang after calibration
- 4800 dpi shding data is incorrect
- move to scan area needs tuning
 2011-06-07 21:26:20 +02:00
Stéphane Voltz ae6349b2ba shading calibration start to work again at <= 600 dpi 2011-06-07 21:26:20 +02:00
Stéphane Voltz 9f9a157801 4800 dpi motor settings progress 2011-06-07 21:26:19 +02:00
Stéphane Voltz d7551176ce 4800 dpi WIP 
- 8 segments scan handling for 8 and 16 bits
- scan buffer size computing fix
- enable 4800 dpi for LiDE 200
- tune minimal slope size to step factor
 2011-06-07 21:26:19 +02:00
Stéphane Voltz 7f30df8b6f 1200 DPI working again 2011-06-07 21:26:18 +02:00
Stéphane Voltz f3fa997d9b gl847 exposure setting rework 2011-06-07 21:26:18 +02:00
Stéphane Voltz 2a6872c385 rework gl847 to set up exposure and coordinates like multi-segmented 
gl124
 2011-06-07 21:26:17 +02:00
Stéphane Voltz 08b5abc8ca add Xerox 2400 onetouch model 2011-04-20 21:42:49 +02:00
Stéphane Voltz 0e2432be53 HP2400/G2410 support progress 2011-01-20 06:59:17 +01:00
Stéphane Voltz 53e28b3cd1 working 2400 dpi mode for LiDE 110 2011-01-13 22:08:31 +01:00
Stéphane Voltz 1e3956b5a5 disable 2400 dpi scanning since it isn't ready 2011-01-12 20:52:57 +01:00
Stéphane Voltz 4da932ad57 2400 dpi for LiDE 110/210 2011-01-11 06:26:41 +01:00
Stéphane Voltz 3e5ecd012a genesys fixes 
- fix shading calibration for non gl847/gl124 scanners
- enable 16 bit gamma for gl847
- add MUST_WAIT flags to gl847 scanners so solve parking isues
 2011-01-07 06:08:15 +01:00
Stéphane Voltz dd2a64e9a4 lide 110/210 scanarea fine tuning 2010-12-29 07:17:14 +01:00
Stéphane Voltz 107374b4fe misc genesys updates 
- add or tune entry for 5600f/700f
- fix HP2300 warming up problem
 2010-12-28 21:01:46 +01:00
Stéphane Voltz fbf9dd562a add half-step mode to DSmobile 600 motor 2010-12-27 22:40:11 +01:00
Stéphane Voltz b8bf7c3840 copyright updates 2010-12-27 07:01:01 +01:00
Stéphane Voltz 86c8214e93 add support for Plustek Opticbook 3600 by Chris Berry & Michael Rickmann 2010-12-27 07:01:01 +01:00
Stéphane Voltz 35385e5725 genesys backend update 
- enable 16 bit gamma for GL124 scanners
- genesys doc credits and models update
 2010-12-26 12:08:01 +01:00
Stéphane Voltz d8552eb4ad GL124 shading area tuning 2010-12-24 08:41:15 +01:00
Stéphane Voltz 37a69dad2d gl847 fixes 
- improved send shading data calls
- fixed shading area line number for gl847 scanners
 2010-12-24 08:28:16 +01:00
Stéphane Voltz 35f133c59b add an device entry for LiDE 210 2010-12-15 06:24:55 +01:00
Stéphane Voltz 3d89a6f880 add new gl124 asic 
create a place holder for low level commands

move low level functions to genesys_low.c

GL124 progresses

enable genesys_low debug and add DAC for LiDE 110

gl124 WIP
- gl847 cleanups
- genesys_low refactor
- gl124 starting version

GL124 WIP
- read scancnt/fedcnt,valid words coded
- memory layout coded

LiDE110 WIP

GL 124 WIP
- definition and use of get/set double/triple
- define register names

all mods done, ready to test

set fe OK

GL124 WIP : ready to test scans

GL124 WIP

GL124 WIP
- fixed analog fe issue: don't put afe regs in global set

GL124 : first light at 300 dpi

GL124 WIP
- 300 and 600 uncalibrated mostly ok (x coordinate rounding)
- 150 and 75 OK x-wise, y to be solved

solved rounding errors for gl124

re-add 400, 200 and 100 dpi modes

GL124 : tous x dpi OK

before adding line cropping

GL124 : line cropping almost finished

GL124 WIP : working line deletion

compute step rework

GL124 WIP : high speed table for dpi <= 300

move to scan area working

line skipping fix

new slope table for 600 dpi base

geometry and movement tuned

GL124 WIP : shading calibration almost working

working 600 dpi shading

GL124 : working shading calibration for all modes but 1200 dpi

working 1200 dpi shading

beta 1 of GL124 support

last tuning

update genesys.desc for LiDE 110

motor slope and start area tuning

shading coefficient computing clean up

add support for GL124 based CanoScan LiDE 110

feed almost OK up to 300 dpi

feeding is fixed

all issues fixed
 2010-12-14 18:23:23 +01:00
Stéphane Voltz ab314aad62 raise LiDE 100/200 gamma to 1.7 by default 2010-10-31 23:48:27 +01:00
Stéphane Voltz 57a160a5bc KV-SS080 tuning 
- fine tune scanarea
- fix sensor pixel number to get proper max width shading calibration
 2010-10-31 23:01:44 +01:00
Stéphane Voltz 5dad014c01 KVSS080 defaults to 0 CKSEL 2010-10-31 23:01:44 +01:00
Stéphane Voltz 95e9a75df4 slow back home rework 
- use available resolution for motor
- don't park on sane_close
 2010-10-31 23:01:43 +01:00
Stéphane Voltz 839851f618 G4050/G4010 progress 
- added 100, 150, 400 and 600 dpi modes for G4050/G4010
- added 400 and 500 dpi modes for KV-SS080
 2010-10-13 06:42:39 +02:00
Stéphane Voltz 29e641f647 G4050 progress 
- 100 and 150 dpi mode added
- varying dpihw
 2010-10-05 21:53:16 +02:00
Stéphane Voltz 561bcd09a9 add test value for G4010 2010-09-28 21:36:02 +02:00
Stéphane Voltz 8e5c4e3c7d working 200 and 300 dpi mode for G4050 2010-09-27 22:05:28 +02:00
Stéphane Voltz d67dac228b G4050 first light 2010-09-17 21:15:38 +02:00
Stéphane Voltz fa555b23d8 KV-SS080 scanarea fine tuning 2010-09-17 06:49:41 +02:00
Stéphane Voltz 58968c0ee1 add 1200 dpi support for KV-SS080 
- fix case where motor resolution is higher than sensor resolution
 2010-09-04 07:27:16 +02:00
Stéphane Voltz 69b9462d20 KV-SS080 tuning 
- fixed shading calibration
- use 2 table move for faster scans
- button support
 2010-09-01 22:20:16 +02:00
Stéphane Voltz e72d6c1007 working version for KV-SS080 
- offset and gain calibration are tuned
 2010-08-31 21:39:21 +02:00
Stéphane Voltz bee968b93d y origin fix 2010-08-28 08:28:14 +02:00
Stéphane Voltz 2dd8d2d765 wip 10 : uncalibrated scans are ok 2010-08-28 08:09:35 +02:00
Stéphane Voltz 4d9852b3fe gl843 wip : uncalibrated scan about to work 
- lperiod=sensor pixels
- park needs fixing
/bin/bash: q : commande introuvable
 2010-08-08 08:59:55 +02:00
Stéphane Voltz 53d04d271e gl843 wip : first light 
- park needs to be fixed
- end_action needs to be fixed
 2010-08-03 07:20:55 +02:00