add test value for G4010

backend/genesys.conf.in

@@ -84,5 +84,8 @@ usb  0x04a7 0x04ac
 # Panasonic KV-SS080
 usb 0x04da 0x100f
 
+# Hewlett Packard ScanJet G4010
+usb 0x03f0 0x4505
+
 # Hewlett Packard ScanJet G4050
 usb 0x03f0 0x4605

backend/genesys_devices.c

@@ -1048,6 +1048,58 @@ static Genesys_Model panasonic_kvss080_model = {
   100
 };
 
+static Genesys_Model hpg4010_model = {
+  "hewlett-packard-scanjet-g4010",	/* Name */
+  "Hewlett Packard",			/* Device vendor string */
+  "ScanJet G4010",			/* Device model name */
+  GENESYS_GL843,
+  NULL,
+
+  { /* 4800, 2400, 1200, 800, 600, 400, */ 300, 200, 0},
+  { /* 4800, 2400, 1200, 800, 600, 400, */ 300, 200, 0},
+  {16, 8, 0},			/* possible depths in gray mode */
+  {16, 8, 0},			/* possible depths in color mode */
+
+  SANE_FIX (6.55),		/* Start of scan area in mm  (x) */
+  SANE_FIX (15.00),		/* Start of scan area in mm (y) */
+  SANE_FIX (223.0),		/* Size of scan area in mm (x) */
+  SANE_FIX (315.0),		/* Size of scan area in mm (y) */
+
+  SANE_FIX (3.0),		/* Start of white strip in mm (y) */
+  SANE_FIX (0.0),		/* Start of black mark in mm (x) */
+
+  SANE_FIX (0.0),		/* Start of scan area in TA mode in mm (x) */
+  SANE_FIX (0.0),		/* Start of scan area in TA mode in mm (y) */
+  SANE_FIX (100.0),		/* Size of scan area in TA mode in mm (x) */
+  SANE_FIX (100.0),		/* Size of scan area in TA mode in mm (y) */
+
+  SANE_FIX (0.0),		/* Start of white strip in TA mode in mm (y) */
+
+  SANE_FIX (0.0),		/* Size of scan area after paper sensor stops
+				   sensing document in mm */
+  SANE_FIX (0.0),		/* Amount of feeding needed to eject document 
+				   after finishing scanning in mm */
+
+  0, 32, 48,			/* RGB CCD Line-distance correction in pixel */
+
+  COLOR_ORDER_RGB,		/* Order of the CCD/CIS colors */
+
+  SANE_FALSE,			/* Is this a CIS scanner? */
+  SANE_FALSE,			/* Is this a sheetfed scanner? */
+  CCD_G4050,
+  DAC_G4050,
+  GPO_G4050,
+  MOTOR_G4050,
+  GENESYS_FLAG_NO_CALIBRATION |
+  GENESYS_FLAG_LAZY_INIT | 	/* Which flags are needed for this scanner? */
+  GENESYS_FLAG_SKIP_WARMUP | 
+  GENESYS_FLAG_OFFSET_CALIBRATION |
+  GENESYS_FLAG_CUSTOM_GAMMA,
+  GENESYS_HAS_SCAN_SW | GENESYS_HAS_FILE_SW | GENESYS_HAS_COPY_SW,
+  280,
+  400
+};
+
 static Genesys_Model hpg4050_model = {
   "hewlett-packard-scanjet-g4050",	/* Name */
   "Hewlett Packard",			/* Device vendor string */
@@ -2351,6 +2403,7 @@ static Genesys_USB_Device_Entry genesys_usb_device_list[] = {
   {0x04a9, 0x1906, &canon_5600f_model},
   /* GL843 devices */
   {0x04da, 0x100f, &panasonic_kvss080_model},
+  {0x03f0, 0x4505, &hpg4010_model},
   {0x03f0, 0x4605, &hpg4050_model},
   {0, 0, NULL}
 };

backend/genesys_gl843.c

@@ -3513,7 +3513,8 @@ gl843_init_gpio (Genesys_Device * dev)
   RIE (sanei_genesys_write_register (dev, REG6F, dev->gpo.enable[1]));
   RIE (sanei_genesys_write_register (dev, REG6C, dev->gpo.value[0]));
   RIE (sanei_genesys_write_register (dev, REG6D, dev->gpo.value[1]));
-  if (strcmp (dev->model->name, "hewlett-packard-scanjet-g4050") == 0)
+  if ((strcmp (dev->model->name, "hewlett-packard-scanjet-g4010") == 0)
+   || (strcmp (dev->model->name, "hewlett-packard-scanjet-g4050") == 0))
     {
       i = 0;
     }