Wykres commitów

4204 Commity (fed309a683492d7a41551c9324b2449da594b709)

Autor SHA1 Wiadomość Data
Henning Geinitz fed309a683 Added *.8. 2004-06-17 11:33:21 +00:00
Stéphane Voltz 06ef6f1dbb - fixed overflows in 610P shading calibration coefficients
-  minor man update
	-  610P status change from minimal to good
2004-06-17 05:09:10 +00:00
Oliver Schwartz 2035924143 Don't enforce even number of URB packages on 1212u_2. Fixes bug #300753. 2004-06-16 19:52:27 +00:00
Henning Geinitz f493221fc6 Only use __attribute__ if gcc is used for compilation. Some other compilers
don't know __attribute__ and therefore can't compile sane-backends without this
fix. See bug #300803.
2004-06-15 12:17:37 +00:00
Stéphane Voltz e4892c69cf * 610P gray levels shading calibration fix
* added timer to let 610P ASIC settle down after probing
2004-06-15 05:45:09 +00:00
Julien BLACHE 6de2f54c0c doc/Makefile.in: saned is in /usr/sbin, its manpage should go to section 8.
Fixed everything referring to saned(1) to refer to saned(8).
2004-06-13 15:25:13 +00:00
Mattias Ellert b9dfa61f90 Adding NEC Petiscan as unsupported 2004-06-13 13:44:38 +00:00
Karl Heinz Kremer b619e0a0f1 Added product ID for Perfection 1650 again, which was removed by mistake, and
finally removed ID for Perfection 1250.
2004-06-13 12:41:00 +00:00
Stéphane Voltz d994cbce53 * final fixes for 610P color scanning,
*  parallel port autodetection for the umax_pp tool
2004-06-12 05:25:41 +00:00
Stéphane Voltz 935f195487 - final fixes for 610P color scanning
- umax_pp tool can autodetect the parallel port
2004-06-12 05:20:53 +00:00
Henning Geinitz 875cc58b94 Fixed version number. 2004-06-10 09:05:25 +00:00
Henning Geinitz c94e8d952c Added Syscan TravelScan FS-531. 2004-06-08 16:25:12 +00:00
Henning Geinitz 447897e8be Added another variant of a Plustek OpticPro 1248U. 2004-06-08 12:10:26 +00:00
Henning Geinitz a33211805c Reduced scan area of Mustek Paragon 1200 A3 Pro. Removed warning
message. Increased support level to complete.
2004-06-08 11:34:02 +00:00
Henning Geinitz 4c314781c5 Mention SCSI buffer size problems and uk/ss files issue. 2004-06-08 11:25:57 +00:00
Gerhard Jaeger fcb44713dd * doc/plustek/BUID: bumped up build number. 2004-06-08 09:32:10 +00:00
Gerhard Jaeger 8dee1e714a bumped up build number. 2004-06-08 09:31:14 +00:00
Gerhard Jaeger 7da3803119 * backend/plustek-pp_misc.c: fixed multiple parport problem for kernel 2.6.x.
* backend/plustek_pp.c: bumped up version number.
2004-06-08 09:30:27 +00:00
Gerhard Jaeger 10ffbfd280 fixed multiple parport problem for kernel 2.6.x. 2004-06-08 09:29:52 +00:00
Gerhard Jaeger 3eef774dde bumped up version number. 2004-06-08 09:29:18 +00:00
Henning Geinitz da63262198 Fixed newlines. 2004-06-08 08:36:52 +00:00
Karl Heinz Kremer db5fdabf16 Removed product IDs for Perfection 1250 and 1260 (they are handled by the
Plustek backend)
2004-06-06 15:13:25 +00:00
Oliver Schwartz c059d91529 Use shared memory functions only when needed 2004-06-06 14:50:36 +00:00
Henning Geinitz c1cd86bb8f Added Mustek BearPaw 2448 Plus and Plustek OpticPro U16B. 2004-06-06 10:50:23 +00:00
Henning Geinitz d8e99b6142 Added REXX script to convert backend-DLL-filenames according to 8.3 naming
convention necessary for DLLs on OS/2 (from Franz Bakan).
2004-06-05 09:48:45 +00:00
Henning Geinitz 7751b3b7eb Changed service name from "sane" to "sane-port". This is the
IANA registered service name for port 6566 (bug #300758).
2004-06-02 18:38:28 +00:00
Oliver Schirrmeister 94ce381d82 bugfix: It is possible to read duplex color now. 2004-06-02 17:17:03 +00:00
Henning Geinitz 446bc30b7d Mattias Ellert has CVS write access now. 2004-05-31 08:40:39 +00:00
Peter Fales 6fa5850937 2004-05-30 Peter Fales <peter@fales-lorenz.net>
* acinclude.m4, aclocal.m4, configure.in, configure
	Use pkg-config rather than gphoto2-config to get gphoto
	build parameters (bug #300686)
2004-05-30 18:55:35 +00:00
Henning Geinitz 38a09ba8bc Mention special kernel patch. 2004-05-30 14:08:18 +00:00
Henning Geinitz 73b6b966b2 Used SANE_VALUE_SCAN_MODE_* constants. 2004-05-30 13:48:40 +00:00
Henning Geinitz d5b20dfd4d Fixed the fix of the sanei_thread fix (from Mattias Ellert). 2004-05-29 10:27:47 +00:00
Henning Geinitz e5465f5e3a Fixed sanei_thread fix (bug #300634, by Mattias Ellert). 2004-05-28 18:52:53 +00:00
Henning Geinitz d3b9dc8a6a Added Dell A920, Microtek 1850S and Plustek OpticPro m12. Removed HP,Scanjet
2300 (already in genesys.desc).
2004-05-28 18:40:01 +00:00
Henning Geinitz 928d8d0b1d Mention trouble with higher optimization levels (from Ulrich Deiters
<ukd@xenon.pc.Uni-Koeln.DE>).
2004-05-28 17:34:47 +00:00
Oliver Schwartz 0b9b6c51db Use shared memory for urb counters in snapscan backend 2004-05-26 22:37:01 +00:00
Henning Geinitz da5773b8cb Work around 8 char limit for dynamic loading on OS/2 (patch from Franz Bakan
<fbakan@gmx.net>).
2004-05-24 19:16:41 +00:00
m. allan noah 9737eaab84 forgot, and only updated makefile 2004-05-24 16:10:36 +00:00
m. allan noah f7eb787095 updated fujitsu backend with thread support 2004-05-24 13:28:38 +00:00
Henning Geinitz 07d7013992 Use sanei_thread instead of fork() in the unmaintained backends.
Patches from Mattias Ellert (bugs: 300635, 300634, 300633, 300629).
2004-05-23 17:28:56 +00:00
Henning Geinitz 04e08cc9ef Detect GL660+GL646 on USB2 also. Fixed Mustek MA1017 scanner freeze problem. 2004-05-23 16:10:39 +00:00
Gerhard Jaeger 1cb426ee47 fixed compilation problem on HP-UX. 2004-05-22 13:54:29 +00:00
Gerhard Jaeger 55624fa51d * fixed compilation problem on HP-UX. 2004-05-22 13:53:50 +00:00
Ulrich Deiters 19fed4c4f8 Ulrich Deiters: removed option "OPT_PAGE" from Canon-SCSI backend 2004-05-21 20:35:26 +00:00
Henning Geinitz e08afb1214 Added more Canon cartridge scanners. Updated Visioneer Paperport 3100b. 2004-05-18 18:59:22 +00:00
Michael Herder 98f1e4d7b6 *** empty log message *** 2004-05-18 07:59:09 +00:00
Ulrich Deiters 6be161afe4 Ulrich Deiters: memory leak plugged, option settings for FS2700 corrected 2004-05-17 15:09:57 +00:00
Oliver Rauch a28bd84350 Added DIR_SEP and PATH_SEP defintions for windows 2004-05-16 22:08:03 +00:00
Gerhard Jaeger 0e43504ef4 * doc/plustek/BUID: bumped up build number.
* doc/plustek/Plustek-PARPORT.changes: update
* backend/plustek-pp_misc.c: fixed kernel 2.6 issue.
  fixed also Bug #300698.
2004-05-15 14:01:57 +00:00
Gerhard Jaeger b43b7f0b01 fixed kernel 2.6 issue.
fixed also Bug #300698.
2004-05-15 13:58:40 +00:00