Olaf Meeuwissen
fd8aedea4c
List Canon MB5300 Series as supported
...
See https://alioth-lists.debian.net/pipermail/sane-devel/2018-September/036340.html
2018-09-08 20:15:15 +09:00
Mikhail Strizhov
1484b47582
add support of Plustek OpticSlim 500+
2018-09-06 12:36:26 +03:00
Olaf Meeuwissen
1d58e23c91
utsushi.desc: Sync with upstream
2018-09-02 20:53:47 +09:00
Rolf Bensch
5230430a57
pixma: backend version 0.17.49
2018-08-27 21:57:24 +02:00
Rolf Bensch
eb11c2fc94
pixma: new scanner i-SENSYS MF731/733
2018-08-27 21:56:48 +02:00
Manuel Argüelles
d61a59ca01
Add support for Canon DR-X10C scanner
...
Added initial support for DR-X10C SSM2 scanner with dropout color, hardware
deskew and hardware crop.
2018-08-21 15:22:20 -05:00
Olaf Meeuwissen
fc88e52511
utsushi.desc: Sync with upstream
2018-06-13 21:23:43 +09:00
Rolf Bensch
4accdae4ed
pixma: backend version 0.17.48
2018-05-16 21:29:50 +02:00
Rolf Bensch
15aebab514
pixma: Canon MAXIFY MB2100 and MB2700 Series support 1200 dpi
2018-05-16 21:29:14 +02:00
Rolf Bensch
a1c42247ab
pixma: backend version 0.17.47
2018-05-12 20:55:35 +02:00
Rolf Bensch
72f9411257
pixma: new scanners Canon Maxify MB2100 and MB2700 Series
2018-05-12 20:55:16 +02:00
Olaf Meeuwissen
c6bfe88c31
Update mailing lists addresses to new location
2018-04-18 21:36:00 +09:00
Olaf Meeuwissen
4ade295ab1
Update mail archive links to point to new location
2018-04-18 21:12:44 +09:00
Olaf Meeuwissen
d22f36f8cc
utsushi.desc: Sync with upstream
2018-04-10 19:41:24 +09:00
Olaf Meeuwissen
f17585e159
*.desc: Mark backends that have become unmaintained
2018-03-26 21:33:56 +09:00
Olaf Meeuwissen
07f1351df5
sane-p5.man: Point to new issue tracker location
2018-03-20 21:48:24 +09:00
Olaf Meeuwissen
a78969384b
autotools: Sync derived files
...
This was done by running
libtoolize --copy
autoreconf --force --install
on Debian GNU/Linux 9.3.
2018-03-17 10:35:57 +09:00
Rolf Bensch
a5ae2dad1d
pixma: backend version 0.17.46
2018-03-11 12:08:18 +01:00
Olaf Meeuwissen
82b9d215fc
Update configuration files to match newer doxygen version
...
The comments have been dropped to cut down on future diff chatter.
Please refer to the doxygen documentation instead.
2018-03-09 22:42:09 +09:00
Olaf Meeuwissen
8849137abb
Make root-relative hrefs/src properties site-relative
...
This allows for hosting content on any level below a domain.
2018-03-05 20:21:58 +09:00
Olaf Meeuwissen
48f950b95a
utsushi.desc: Sync with upstream
2018-02-27 21:38:06 +09:00
Olaf Meeuwissen
a84290a8f9
sane.man: Fix typo in stv680 backend name
2018-02-20 21:24:56 +09:00
Olaf Meeuwissen
f38a1731a6
Point to new GitLab.com repository location
2018-02-09 18:47:59 +09:00
Olaf Meeuwissen
c32c78fe8e
epson2.desc: Add ET-2650/L495 as supported
...
Information courtesy of Ed Hamrick.
2018-02-08 22:04:33 +09:00
Olaf Meeuwissen
0e7b3b7925
utsushi.desc: sync with upstream
2018-02-08 21:52:14 +09:00
Rolf Bensch
3c6a3d4992
pixma: Canon MAXIFY MB2300 Series is working
...
- reported by Patrick Roncagliolo
2018-02-04 13:12:34 +01:00
Rolf Bensch
b487db3af0
pixma: Canon i-SENSYS MF620 Series is working
...
reported by Markus Heiser
2018-01-04 19:52:16 +01:00
Rolf Bensch
b6873cfa5a
pixma: backend version 0.17.45
2018-01-03 21:01:32 +01:00
Rolf Bensch
a873a5e444
pixma: new scanner Canon i-SENSYS MF630 Series [ #315892 ]
2018-01-03 21:00:51 +01:00
Rolf Bensch
e6db7a8f14
pixma: new scanner Canon i-SENSYS MF630 Series
2018-01-03 20:52:39 +01:00
Rolf Bensch
463e010f1a
pixma: new scanner Canon i-SENSYS MF620 Series
...
many thanks to Markus Heiser
2018-01-03 20:07:33 +01:00
Rolf Bensch
781c4ad080
pixma: Canon MAXIFY MB2000 Series is working, except ADF ( #315538 )
2018-01-02 14:14:05 +01:00
Edward Betts
e895ee55be
sane-find-scanner: Recognize --help as a valid option
2017-12-05 22:07:26 +09:00
Gerhard Jaeger
214f82e36a
[ #315864 ] CanoScan LiDE25 -> CanoScan LiDE 25
...
Change LiDE descriptions and split as suggested in the ticket.
While here remove outdated URL.
2017-11-18 15:07:25 +01:00
Olaf Meeuwissen
d6a93b83a7
epson2: Add Expression 12000XL / DS-G20000 as supported
...
Also removed stale comment in epson2.desc.
See https://lists.alioth.debian.org/pipermail/sane-devel/2017-November/035744.html
2017-11-18 17:47:14 +09:00
Olaf Meeuwissen
76600e3974
utsushi.desc: sync with upstream
2017-11-18 16:44:03 +09:00
Rolf Bensch
c51af8fd99
pixma: fix typos
2017-11-14 22:16:40 +01:00
Olaf Meeuwissen
77722d754f
utsushi.desc: sync with upstream
2017-10-11 22:09:43 +09:00
Olaf Meeuwissen
99a98e448b
saned: Brush up manual page's OPTIONS section following 5288dd5f
2017-09-29 21:49:08 +09:00
Luiz Angelo Daros de Luca
5288dd5f61
saned: reorganize flags, remove run_mode SANED_RUN_DEBUG
...
Flags like -a, -d and -s have many overlap effects. This patch restricts
the effect of flags to a simple action.
New -u (user) flag replaces -a optional argument for running saned as a different user.
The code that retrieve the user info and drop privileges migrated to runas_user().
As a side effect, PID file can be created even if getting user info fails.
New -l (listen) flag sets run_mode to standalone.
New -D (daemonize) flag daemonizes saned after bind.
New -o (once) make saned exit after the first client disconnects.
Flag -s (syslog) is gone. Previous behavior can be reproduced with '-a -d level -o -f'.
New -e (stderr) flag for redirecting output to stderr, instead of syslog.
Flag -d (debug) now only sets the debug level and argument is required. Previous behavior
can be reproduced with '-a -d level -o -f -e'.
The run_mode SANED_RUN_DEBUG and SANED_RUN_ALONE shared most of its code
path. With the new flags dealing with their difference, SANED_RUN_DEBUG is gone.
Flag '-a' still works as before but it can be replaced by '-l -D -u user'.
Current uses of -d (debug) or -s (syslog) will break.
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
2017-09-29 20:43:36 +09:00
Olaf Meeuwissen
c9356cb184
saned: Fix incorrect claim about passing options to inetd etc.
2017-09-09 15:37:13 +09:00
Farid Benamrouche
1f68d8d8c4
saned: Cancel scan if data connection appears to have gone away
...
The data connection timeout default to 4000ms but is configurable
in saned.conf.
See Alioth 315765
2017-09-07 22:37:31 +09:00
Rolf Bensch
0a62202e95
pixma: backend version 0.17.44
2017-09-01 12:15:40 +02:00
Rolf Bensch
055c3ffa86
pixma: new scanners Canon PIXMA E410 Series, E3100 Series, G2000 and G3000
2017-09-01 12:15:10 +02:00
Rolf Bensch
61ca162fc0
pixma: fix definitions for PIXMA G4000
2017-09-01 12:07:57 +02:00
Rolf Bensch
fef19d7740
pixma: backend version 0.17.43
2017-08-31 20:34:32 +02:00
Olaf Meeuwissen
9b95970b91
utsushi.desc: Sync with upstream
2017-08-20 14:08:33 +09:00
Rolf Bensch
6eb2a0d10a
pixma: fix device interface info for PIXMA MG7100 Series
2017-08-18 10:06:17 +02:00
Olaf Meeuwissen
5a0e30b5e3
epson2: Add the Epson XP-243 245 247 Series as supported
...
See https://alioth.debian.org/tracker/?func=detail&atid=410366&aid=315818&group_id=30186
2017-08-17 21:34:11 +09:00
Olaf Meeuwissen
1e87016dca
epson2: Add the Epson XP-427 as supported
...
See https://alioth.debian.org/tracker/index.php?func=detail&aid=315805&group_id=30186&atid=410366
2017-08-12 15:07:07 +09:00
Luiz Angelo Daros de Luca
f19a41e6f7
saned: update man for option -b
2017-07-29 17:58:31 +09:00
Olaf Meeuwissen
56398ead60
sane-usb: Document SANE_USB_WORKAROUND variable
...
Fixes Alioth#315792. Thanks Zdenek Dohnal
2017-07-22 11:48:14 +09:00
Rolf Bensch
3258b70de4
pixma: fix device status for i-SENSYS MF240 Series
...
and add comment for image width workaround (see: 611647b
)
2017-07-16 11:46:27 +02:00
Rolf Bensch
48cb209f2a
pixma: backend version 0.17.42
2017-07-11 14:02:11 +02:00
Rolf Bensch
62fcf80c0b
pixma: PIXMA TS5000 Series ( #315764 ) and TS8000 Series ( #315763 ) are working
2017-07-10 23:34:01 +02:00
Rolf Bensch
02a4ec11bf
pixma: backend version 0.17.41
2017-07-10 23:12:56 +02:00
Rolf Bensch
862f265631
pixma: remove unreachable and depreciated websites from man page
2017-07-10 23:12:51 +02:00
Rolf Bensch
890aa30a7c
pixma: i-SENSYS MF210 Series is working
2017-07-10 22:01:26 +02:00
Rolf Bensch
fbbb6cabf3
pixma: fix capabilities for TS* Series
2017-07-10 21:47:40 +02:00
Olaf Meeuwissen
a06e9a4075
Script updating of upstream files
2017-06-12 20:53:53 +09:00
Rolf Bensch
75e271444a
pixma: backend version 0.17.40
2017-06-01 14:11:48 +02:00
Rolf Bensch
80445f9e57
pixma_imageclass.c: MF240 Series restricts adf scans to max. 300dpi
2017-06-01 14:09:21 +02:00
Olaf Meeuwissen
f0f187f995
.editorconfig: trim trailing blank lines
2017-05-29 21:14:30 +09:00
Olaf Meeuwissen
ffa573f65e
.editorconfig: insert a newline at end-of-file
...
This keeps `git` from "complaining" about this when doing a diff. It
also keeps your prompt at the left edge when you `cat` a file.
2017-05-29 21:14:29 +09:00
Olaf Meeuwissen
23891a2646
.editorconfig: trim trailing whitespace
2017-05-29 21:14:29 +09:00
Rolf Bensch
7893b77d92
pixma: backend version 0.17.39
2017-05-26 23:37:28 +02:00
Rolf Bensch
2b0028b4af
Merge branch 'pixma/mf240_adf_only_300dpi'
2017-05-23 21:16:52 +02:00
m. allan noah
35dc4426d2
Open repo for 1.0.28 development
2017-05-22 21:08:33 -04:00
m. allan noah
82cd8f245c
SANE-backends release 1.0.27
...
Moved old changelogs to new directory, and excluded them from
release tarball.
Improved release docs.
Updated config.* files
Bumped version numbers.
Wrote release notes.
2017-05-22 11:16:40 -04:00
Rolf Bensch
2bba273993
pixma: backend version 0.17.38
2017-05-20 14:15:19 +02:00
Rolf Bensch
16f3060061
pixma: i-SENSYS MF240 Series is working
2017-05-20 14:13:19 +02:00
Jörg Frings-Fürst
85b91bcd24
doc: fix typos, formatting and stylistic issues
2017-05-13 18:38:43 +09:00
Klaus Kämpf
0cf531e445
Update pieusb.conf and pieusb.desc
2017-05-10 20:03:31 +09:00
Rolf Bensch
135b4a3909
pixma.desc: fix version of backend
2017-05-10 11:51:35 +02:00
Olaf Meeuwissen
f624a9f725
utsushi.desc: sync with upstream
2017-05-04 18:17:03 +09:00
Rolf Bensch
611388db1d
pixma.desc: fix usbid for PIXMA TS5000 Series
2017-04-27 21:59:24 +02:00
Olaf Meeuwissen
5389301a40
utsushi.desc: PID 0156 is a ES-400
...
See Alioth issue 315695.
2017-04-27 22:26:01 +09:00
Rolf Bensch
5fa4be5ae4
pixma: backend version 0.17.36
2017-04-26 11:43:41 +02:00
Rolf Bensch
879565cefc
new scanners Canon i-SENSYS MF230 and MF240 Series
2017-04-26 11:43:30 +02:00
Olaf Meeuwissen
0960bf9c72
utsushi.desc: sync with upstream
2017-04-18 20:12:31 +09:00
m. allan noah
dcddb9505c
epjitsu backend v31
...
- hardware gray support for fi-60F/65F (disabled pending calibration)
- merge fi-60F/65F settings
- improve desc, conf and man files
2017-04-11 21:32:37 -04:00
m. allan noah
9712e2aa25
fujitsu backend v133 2017-04-08, MAN
...
- initial support for fi-7600/7700
- autodetect various double feed capabilities using VPD
- call send_lut if we are using a downloaded gamma table
2017-04-08 21:44:27 -04:00
Olaf Meeuwissen
ccb47215e6
Add missing double quote
...
Accidently removed in 38ce7fc086
.
Thanks to Jon Nelson for pointing this out.
2017-04-07 20:28:02 +09:00
Olaf Meeuwissen
38ce7fc086
Update SANE developer and backend maintenance status
2017-04-05 18:29:41 +09:00
Rolf Bensch
cbcab6dffa
pixma: backend version 0.17.35
2017-04-04 12:00:31 +02:00
Rolf Bensch
66ce95a5a1
new scanners Canon PIXMA G3000, E470, G3000, TS5000, TS6000, TS8000 and TS9000 [ #315658 ]
2017-04-04 12:00:25 +02:00
Rolf Bensch
17f3899b15
pixma: new option adf-wait
2017-04-04 11:23:03 +02:00
Rolf Bensch
3ef45ec3c3
pixma: update docs for MG5400 Series
2017-04-04 11:16:20 +02:00
Olaf Meeuwissen
1e028b72ca
pixma: updated status for MG5400 Series
...
See http://lists.alioth.debian.org/pipermail/sane-devel/2017-March/035072.html
and http://lists.alioth.debian.org/pipermail/sane-devel/2017-March/035082.html
2017-03-07 20:10:53 +09:00
Olaf Meeuwissen
928b803ef1
utsushi.desc: sync with upstream
2017-03-05 15:35:06 +09:00
Olaf Meeuwissen
f450049bcc
utsushi.desc: sync with upstream
2017-02-14 18:52:25 +09:00
Olaf Meeuwissen
e3ed043500
Update backend maintenance status
...
Following the project member list cleanup, only backends that list
a project member with git write access in the AUTHORS file are now
considered maintained.
2017-01-09 19:39:31 +09:00
Louis Lagendijk
589e011992
Update the sane-pixma man-page for the new timout setting option.
2017-01-06 22:15:24 +01:00
Dave Platt
6585b6f60d
avision.c: Add "skip-adf" option
...
The code which tries aggressively to reset/initialize HP 82xx/83xx
Automatic Document Feeders doesn't work well if there's no ADF attached,
because the scanner reports a non-zero ADF model type in this case.
The retry code makes several attempts to initialize the ADF, and then
bails out with an "Operation not supported" error.
Add a new "option skip-adf" which will cause the backend to believe
the "ADF not present" status if that's what the scanner reports.
Fixes #313751
2016-12-15 22:56:09 -08:00
Alex Belkin
6484ff8fc3
Forgoten comma in backends man pages list.
2016-11-06 23:03:23 +03:00
Alex Belkin
610533a9a6
Update xerox_mfp man page.
2016-11-06 21:24:38 +03:00
Alex Belkin
ba6a5710b5
Update sane.man to index xerox_mfp backend.
2016-11-06 21:07:39 +03:00
Rolf Bensch
cfa98fd0d1
pixma: backend version 0.17.34
2016-10-08 14:25:33 +02:00
Rolf Bensch
7e20475c8b
pixma: new scanner Canon PIXMA MG3000 Series
...
see bug report #315521
2016-10-08 14:24:53 +02:00
Rolf Bensch
3b63fdab2b
pixma: backend version 0.17.33
2016-10-05 20:05:37 +02:00
Olaf Meeuwissen
4119f05d5f
Fix USB ID typo
2016-09-21 21:54:39 +09:00
Olaf Meeuwissen
bf088a6ed1
Merge comments
...
This gets rid of a missing :usbid warning.
2016-09-19 17:45:35 +09:00
Olaf Meeuwissen
e01f574b19
Merge duplicate entry
2016-09-19 17:44:48 +09:00
Olaf Meeuwissen
1a328e412f
Add missing USB IDs
...
Taken from http://www.linux-usb.org/usb.ids
2016-09-19 17:44:14 +09:00
Olaf Meeuwissen
dd940a1f61
utsushi.desc: sync with upstream
2016-09-19 12:41:58 +09:00
Olaf Meeuwissen
4dce101c05
Keep generated *.eps and *.pdf files out of the repository
2016-09-19 10:04:35 +09:00
m. allan noah
9d388c3593
canon_dr v56
...
- add initial support for P-150M (and probably P-150)
2016-09-11 19:04:34 -04:00
Olaf Meeuwissen
246673715d
utsushi.desc: sync with upstream
2016-09-03 14:36:49 +09:00
Olaf Meeuwissen
bf53c71434
Sync with upstream
2016-08-04 22:47:01 +09:00
Olaf Meeuwissen
ef8e258165
Sync autofoo
2016-07-14 21:12:38 +09:00
Olaf Meeuwissen
57350969f6
sane.tex: mark up email as a URL
2016-07-14 20:51:42 +09:00
Olaf Meeuwissen
707baa0d16
doc/sane.tex: drop html.sty in favour of url.sty
...
The latter is part of the core TeX Live distribution which is readily
available on all major operating systems.
2016-07-14 20:50:14 +09:00
Olaf Meeuwissen
bfd1626c4b
Sync autofoo
2016-07-13 23:44:26 +09:00
Olaf Meeuwissen
8598f81d0b
Fix figure orientation
2016-07-13 23:43:35 +09:00
Olaf Meeuwissen
00bc3e9b45
Generate EPS figures too
...
It's good to know how this is done so that we can modify any original
figure if need be.
2016-07-13 23:40:19 +09:00
Olaf Meeuwissen
cc8f99b900
Generate PDF figures explicitly with fig2dev
...
This utility has less dependencies and supports conversion to a pile of
other formats that may come in handy as well.
Clean up of generated PDF figures has been moved to the clean target as
well.
2016-07-13 23:24:29 +09:00
Olaf Meeuwissen
d7e1995d00
doc/sane.tex: Replace epsfig with graphicx
...
The graphicx package allows for file specification without a hardcoded
extension. This provides more freedom in chosing how to prepare images
in *.eps and *.pdf formats.
Moreover, epsfig is considered mostly obsolete in the TeX community and
graphicx is the "current 'preferred' solution" to embed figures.
See https://www.ctan.org/pkg/epsfig .
2016-07-13 22:37:44 +09:00
Olaf Meeuwissen
0aab12b934
Bump standard minor version
...
This is to acknowledge the SANE_STATUS_GOOD fixes in net.tex that were
committed in 4daf488
and 1100883
.
2016-07-11 20:41:54 +09:00
Olaf Meeuwissen
1ed3b9fa86
Reclassify doc/html.sty
...
It is a package used by doc/sane.tex.
2016-07-11 20:40:11 +09:00
Olaf Meeuwissen
2481e1e98b
Sync autofoo
2016-07-10 21:54:24 +09:00
Olaf Meeuwissen
fa41b18001
Refactor API spec conversion support
...
Unless explicitly asked to do without, all formats for which required
tools are found will be built. Checks cover PostScript, PDF and HTML.
All logic and files involved are now collected in a single "section"
and grouped in such a way that their function should be clearer.
fixup! Refactor API spec conversion support
2016-07-10 21:53:32 +09:00
Olaf Meeuwissen
d7c69d141f
Add test for the TeX to HTML converter
2016-07-10 20:53:23 +09:00
Olaf Meeuwissen
fe2fbe06e1
Refactor TEXINPUTS handling
2016-07-10 20:53:23 +09:00
Olaf Meeuwissen
f322cbc7f9
Add support for PDF API spec output
...
Note that pdflatex internally uses epstopdf which in turn requires a
working ghostscript.
2016-07-10 15:41:08 +09:00
Olaf Meeuwissen
5a73fb24d1
Be quiet but do not hide errors
2016-07-10 14:48:43 +09:00
Olaf Meeuwissen
e0fd693bb1
Fix API spec generation for VPATH builds
2016-07-10 13:32:22 +09:00
Olaf Meeuwissen
c962368626
Sync autofoo
2016-07-01 23:45:43 +09:00
Olaf Meeuwissen
f03f1f66d4
Sync autofoo files
2016-06-29 22:15:06 +09:00
Olaf Meeuwissen
cb4924f210
Stop distclean from removing files willy-nilly
...
The distclean target should only remove files that make creates. If
there are any that need taking care of, they should be added in on a
per file basis in the Makefile.am that creates it.
2016-06-26 10:24:30 +09:00
Olaf Meeuwissen
8274a52eec
Sort .gitignore files
2016-06-26 10:24:30 +09:00
Olaf Meeuwissen
bdade6bb07
Sync derived files with previous changes
2016-06-26 10:24:29 +09:00
Olaf Meeuwissen
f13ca02b86
Fix variable name typo and other typographic nit-picks
2016-06-20 21:44:44 +09:00
Olaf Meeuwissen
e7100e275d
Update documentation to reflect recent changes
2016-06-15 20:47:28 +09:00
Olaf Meeuwissen
d853463ef1
Sync derived files
...
This was done with
AUTOMAKE="automake --add-missing --copy" autoreconf --force
on Debian GNU/Linux 8.5.
2016-06-14 06:30:48 +09:00
Olaf Meeuwissen
79c623628a
Fix new automake warnings
2016-06-14 05:52:19 +09:00
Olaf Meeuwissen
87e12bbf2e
Sync derived files with autoreconf --force
...
For the record, this was done on Debian GNU/Linux 8.5.
2016-06-13 22:24:21 +09:00
Olaf Meeuwissen
7a2b112d20
Prefer make variables over literal substitutions
...
The AC_SUBST and PKG_CHECK_MODULE invocations in configure.ac as well as
acinclude.m4 are sufficient to trigger automake to insert initialization
logic for the variables these introduce. There is no need to do this by
hand. Wherever these values are needed, it is better to use a variable.
This allows for one-off overrides on the make command-line (without the
need to run ./configure) for one thing.
2016-06-13 21:50:36 +09:00
m. allan noah
5ba37467e8
fujitsu backend v131
...
- hide compression-arg option when jpeg disabled
- add Send/SC/GHS macros for recent scanners
- add initial support for fi-74x0
- add initial support for fi-7030
- set has_MS_lamp=0 for fi-71x0
- add I18N macros to all option titles and descriptions
- add usb ids for many newer scanners
2016-06-09 21:53:13 -04:00
Alex Belkin
926bfade54
Color scanning for Samsung models, which support JPEG Lossy compression.
...
Patch is submitted by Laxmeesh Onkar Markod <m.laxmeesh@samsung.com>
Patch to code is applied almost verbatim, except, insignificant
formatting fixes and making new functions static.
Also, new USB ids added and scanner support is changed as reported.
2016-05-07 22:33:03 +03:00
Louis Lagendijk
c8169b1e65
pixma.h: step version of the backend to 0.17.32
...
sane-pixma.man pixma.desc: mark Maxify MB5000 as complete (but ADF does not work)
2016-04-22 23:58:23 +02:00
Rolf Bensch
51943537c3
pixma: backend version 0.17.30
2016-04-12 18:14:55 +02:00
Rolf Bensch
270a8cd3be
pixma: Canon PIXMA MG7700 Series is working
2016-04-12 18:13:36 +02:00
m. allan noah
e6b6ad9d48
canon_dr backend v55
...
fixed-width scanners were calculating left-side offset incorrectly in color
initial support for DR-F120
rename all DUPLEX_INTERLACE_* to indicate start and end of line
2016-04-05 20:31:19 -04:00
Rolf Bensch
52bc4d241c
pixma: backend version 0.17.29
2016-03-21 10:53:29 +01:00
Rolf Bensch
23eb95582d
pixma: backend version 0.17.28
2016-03-04 13:38:12 +01:00
Rolf Bensch
38d6f1ba6d
pixma_imageclass: MF6100 Series document feeder does not have 600DPI capability
2016-03-04 13:08:31 +01:00
Rolf Bensch
2f891c13bb
pixma: backend version 0.17.27
2016-03-03 13:40:46 +01:00
Stéphane Voltz
c5117ed0f1
doc and version update
2016-02-24 21:43:29 +01:00
Rolf Bensch
926a7e67b6
pixma: fix scanner names
2016-02-17 21:24:18 +01:00
Rolf Bensch
235dc80b5f
pixma: Canon i-SENSYS MF6100 Series is working
2016-02-17 21:10:44 +01:00
Rolf Bensch
af35e9ba74
pixma: Canon Pixma MG3600 Series is working
...
Reported by Rajib Bandopadhyay
2016-02-11 12:06:34 +01:00
Rolf Bensch
f78e85cad6
pixma: backend version 0.17.25
2016-01-08 18:35:20 +01:00
Rolf Bensch
b08c324223
pixma: Canon PIXMA MG5700 Series is working
...
Reported by Andrew Reginato, bug #315244
2016-01-08 18:34:27 +01:00
Rolf Bensch
b040b150a0
pixma: fix for [ #315244 ] Add support for Canon PIXMA MG5700, MG6800, MG6900 and MG7700
...
These scanners are new and need further testing!
2016-01-08 16:54:30 +01:00
Olaf Meeuwissen
5136e664b8
Document ChangeLog policy change
2015-12-20 21:58:45 +09:00
m. allan noah
e9b52639e8
Add note about changelogs
2015-12-15 07:24:07 -05:00
m. allan noah
753d123f36
canon_dr desc update
...
add note about mode switch on P-208
2015-11-29 21:42:07 -05:00
Olaf Meeuwissen
f1593204c7
Drop execute permission
...
Source code, description files and configuration templates should never
need to be executed.
2015-11-27 21:28:09 +09:00
m. allan noah
d0ea697ab8
fujitsu backend v129
...
- br_x and br_y locked to page_width/height until changed
- add USB ID's for fi-6xxxLA and fi-6xxxZLA scanners
- add USB ID's for unsupported SP11xx scanners (genesys based)
2015-11-23 21:08:30 -05:00
m. allan noah
0b822359b3
cardscan backend v3
...
add USB IDs for newer model 800c
2015-11-05 21:44:58 -05:00
m. allan noah
f8d35b8d2f
Update canon_dr.desc
...
We had a few scanners that were reported by email or in tracker
tickets, which had not been updated in the desc file.
2015-10-26 08:35:33 -04:00
Rolf Bensch
4a83d9c8a4
Pixma backend version 0.17.24
2015-10-14 19:04:27 +02:00
Rolf Bensch
3095ab46c4
new scanners Canon PIXUS MP5/SmartBase MPC190/imageCLASS MPC190 and Canon MP10/SmartBase MPC200/imageCLASS MPC200
2015-10-14 19:02:43 +02:00
m. allan noah
56e69f0998
added kvs1025.conf.in and utsushi.desc
2015-10-05 08:21:39 -04:00
m. allan noah
69a9a3116e
minor release doc update
2015-10-04 21:25:08 -04:00
m. allan noah
5e1d45cad7
reopen sane-backends 1.0.26git
2015-10-04 21:13:39 -04:00
m. allan noah
60a772ca5d
sane-backends 1.0.25
2015-10-04 09:24:46 -04:00
m. allan noah
2ecf18f6fb
autoheader and automake
...
After recent PNG and SNMP changes, need to run autoheader and automake
2015-10-02 21:53:14 -04:00
Olaf Meeuwissen
4d746878d9
Sync with upstream
2015-09-30 20:35:04 -04:00
Rolf Bensch
7b05bad5f9
Canon PIXMA MG5600 Series is working
2015-09-30 18:56:11 +02:00
Rolf Bensch
cbae0ea53b
Pixma backend version 0.17.23
2015-09-26 10:10:38 +02:00
m. allan noah
301dbf977a
hp backend now unmaintained
2015-09-25 21:19:17 -04:00
Louis Lagendijk
39545b1b90
clarified systemd integration and options for the case where saned is complied
...
without systemd glue
2015-09-22 20:33:11 +02:00
Alessandro Zummo
86ba3c634f
epson2: updated supported scanners
2015-09-22 00:44:38 +02:00
m. allan noah
87bfd53512
Run autofoo for recent changes
2015-09-19 13:39:38 -04:00
Olaf Meeuwissen
e44c19f839
Add EPSON CX-3810 USB IDs. Fixes #303746
2015-09-19 13:39:37 -04:00
Olaf Meeuwissen
cef08410a7
Remove dead link
2015-09-19 13:39:37 -04:00
Eduard - Gabriel Munteanu
ac1bf8d754
magicolor: add support for magicolor 4690MF
...
Currently, this works for USB, but the network OID needs to be
filled in properly.
Signed-off-by: Eduard - Gabriel Munteanu <edgmnt@gmail.com>
2015-09-19 12:02:57 -04:00
Eric Raymond
baa71a5ca8
Markup error in sane-mustek_pp.5
...
Garbled .TP entry with no body make structural translation to HTML
impossible.
2015-09-19 12:02:57 -04:00
Eric Raymond
6633eea628
Markup error in sane-apple.5
...
Garbled list syntax can't be cleanly lifted to HTML or XML.
2015-09-19 12:02:57 -04:00
Olaf Meeuwissen
b322c8e904
Add PNG/JPEG info to other format related sections; fixup punctuation
2015-09-19 12:02:57 -04:00
Olaf Meeuwissen
002fea134a
Align JPEG format command-line option behaviour with TIFF
2015-09-19 12:02:57 -04:00
Matteo Croce
bc698d4329
add JPEG support to scanimage
2015-09-19 12:02:57 -04:00
Matteo Croce
c83123ee46
add PNG format to scanimage
2015-09-19 12:02:57 -04:00
Alessandro Zummo
254cc21b5f
epson2: fix scsi entries in epson2.desc
2015-09-10 17:02:51 +02:00
Alessandro Zummo
a5c2607755
epson2: upated supported models
2015-09-10 16:09:40 +02:00
Stéphane Voltz
85a448be1f
fix genesys man and desc
...
- no LiDE 120 support
2015-09-09 21:25:47 +02:00
Stéphane Voltz
c132ac07db
file mode change
2015-09-09 21:24:56 +02:00
Olaf Meeuwissen
85a7609557
Add specifications file for the external `utsushi` backend
2015-09-08 22:23:23 -04:00
Olaf Meeuwissen
28d1b2e4d6
Sync doc/descriptions-external/epkowa.desc with latest upstream
2015-09-08 22:23:23 -04:00
Olaf Meeuwissen
d8c5dd00fe
Add info to get an IEEE1394 connected GT-X700 recognized by udev
...
This assumes that all of GT-X900, Perfection V700 and Perfection V750
advertise themselves as GT-X900 in their SCSI info. Only the V700 is
known to do so at present.
2015-09-08 22:23:23 -04:00
Rolf Bensch
697d834023
Pixma backend version 0.17.22
2015-09-03 20:09:46 +02:00
m. allan noah
f45e1669bc
canon_dr/fujitsu doc updates
2015-08-31 21:30:33 -04:00
m. allan noah
7566619e53
rebuild with automake 1.14.1
2015-08-31 20:58:30 -04:00
Yuval Levy
9653f1358e
Clarify use of --buffer-size option
2015-08-31 20:31:54 -04:00
Klaus Kämpf
5337625f3a
New backend pieusb
...
This commit adds support for (slide) scanners based
on Pacific Image Electronics (PIE) oem scan hardware.
It is known to match the following USB scanners
PIE PowerSlide 3600 Untested
PIE PowerSlide 3650 Untested
PIE PowerSlide 4000 Untested
PIE PowerSlide 5000 Untested
Reflecta CrystalScan 7200 Untested
Reflecta ProScan 7200 Untested
Reflecta DigitDia 4000 Untested
Reflecta DigitDia 5000 Untested
Reflecta DigitDia 6000 Ok
The backend is based on work by Jan Vleeshouwers and Michael Rickmann.
Special thanks to Stéphane Voltz for the code review.
Add pieusb to backend/Makefile.am
Add pieusb to doc/Makefile.am
Add missing sanei/sanei_ir.c, sanei/sanei_ir.h, adapt Makefile.am
configure.ac: Add 'pieusb' to ALL_BACKENDS
ChangeLog: Add pieusb as new backend
Mark infrared functions as internal: sane_ir_* -> sanei_ir_*
sanei/sanei_ir.c: fix memory leaks
pieusb: rename cmdGetMode and cmdSetScanHead
... to their sanei_pieusb_cmd_... equivalent
pieusb: rename definition_list_head to pieusb_definition_list_head
Add pieusb to AUTHORS
pieusb: copyright 2012-2015
pieusb: don't include sanei_thread.h
2015-08-31 21:07:12 +02:00
m. allan noah
2cb3140903
fujitsu backend v126
...
- initial support for iX100
- add late_lut support for iX500/iX100
2015-08-23 20:52:49 -04:00
m. allan noah
2f68498ee5
canon_dr backend v1.0.50
...
- DR-C125 adds duplex padding on back side
- initial support for DR-C225
2015-08-23 20:52:49 -04:00
Rolf Bensch
12bca33625
Pixma backend version 0.17.21
2015-08-10 23:20:56 +02:00
Rolf Bensch
9188678fc0
Pixma backend version 0.17.20
2015-08-07 23:21:04 +02:00